From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>, Anton Blanchard <anton@samba.org>
Subject: [PATCH 02/14] powerpc/64: syscall avoid restore_math call if possible
Date: Fri, 2 Jun 2017 17:39:34 +1000 [thread overview]
Message-ID: <20170602073946.8983-3-npiggin@gmail.com> (raw)
In-Reply-To: <20170602073946.8983-1-npiggin@gmail.com>
The syscall exit code that branches to restore_math is quite
heavyweight on Book3S, consisting of 2 mtmsr instructions. This
case can happen even if restore_math decides there is nothing
to do due to lazy math restore.
Check for lazy restore before calling restore_math. Move most
of that case out of line.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/entry_64.S | 62 +++++++++++++++++++++++++++++-------------
arch/powerpc/kernel/process.c | 4 +++
2 files changed, 47 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index bfbad08a1207..019a6322b982 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -210,27 +210,17 @@ system_call: /* label this so stack traces look sane */
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
- andi. r0,r8,MSR_FP
- beq 2f
+ /* If MSR_FP and MSR_VEC are set in user msr, then no need to restore */
+ li r0,MSR_FP
#ifdef CONFIG_ALTIVEC
- andis. r0,r8,MSR_VEC@h
- bne 3f
+ oris r0,r0,MSR_VEC@h
#endif
-2: addi r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_BOOK3S
- li r10,MSR_RI
- mtmsrd r10,1 /* Restore RI */
-#endif
- bl restore_math
-#ifdef CONFIG_PPC_BOOK3S
- li r11,0
- mtmsrd r11,1
-#endif
- ld r8,_MSR(r1)
- ld r3,RESULT(r1)
- li r11,-MAX_ERRNO
+ andc r7,r8,r0
+ cmpd r7,r0
+ bne syscall_restore_math
+.Lsyscall_restore_math_cont:
-3: cmpld r3,r11
+ cmpld r3,r11
ld r5,_CCR(r1)
bge- syscall_error
.Lsyscall_error_cont:
@@ -263,7 +253,41 @@ syscall_error:
neg r3,r3
std r5,_CCR(r1)
b .Lsyscall_error_cont
-
+
+syscall_restore_math:
+ /*
+ * Some initial tests from restore_math to avoid the heavyweight
+ * C code entry and MSR manipulations.
+ */
+ LOAD_REG_IMMEDIATE(r0, MSR_TS_MASK)
+ and. r0,r0,r8
+ bne 1f
+
+ ld r7,PACACURRENT(r13)
+ lbz r0,THREAD+THREAD_LOAD_FP(r7)
+#ifdef CONFIG_ALTIVEC
+ lbz r6,THREAD+THREAD_LOAD_VEC(r7)
+ add r0,r0,r6
+#endif
+ cmpdi r0,0
+ beq .Lsyscall_restore_math_cont
+
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_BOOK3S
+ li r10,MSR_RI
+ mtmsrd r10,1 /* Restore RI */
+#endif
+ bl restore_math
+#ifdef CONFIG_PPC_BOOK3S
+ li r11,0
+ mtmsrd r11,1
+#endif
+ /* Restore volatiles, reload MSR from updated one */
+ ld r8,_MSR(r1)
+ ld r3,RESULT(r1)
+ li r11,-MAX_ERRNO
+ b .Lsyscall_restore_math_cont
+
/* Traced system call support */
syscall_dotrace:
bl save_nvgprs
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index baae104b16c7..5cbb8b1faf7e 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -511,6 +511,10 @@ void restore_math(struct pt_regs *regs)
{
unsigned long msr;
+ /*
+ * Syscall exit makes a similar initial check before branching
+ * to restore_math. Keep them in synch.
+ */
if (!msr_tm_active(regs->msr) &&
!current->thread.load_fp && !loadvec(current->thread))
return;
--
2.11.0
next prev parent reply other threads:[~2017-06-02 7:40 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-02 7:39 [RFC][PATCH 00/14] syscall, context switch, idle performance stuff Nicholas Piggin
2017-06-02 7:39 ` [PATCH 01/14] powerpc/64s: optimize hypercall/syscall Nicholas Piggin
2017-06-02 7:39 ` Nicholas Piggin [this message]
2017-06-02 7:39 ` [PATCH 03/14] powerpc/64s: idle move soft interrupt mask logic into C code Nicholas Piggin
2017-06-02 7:39 ` [PATCH 04/14] powerpc/64s: process interrupts from system reset wakeup Nicholas Piggin
2017-06-02 7:39 ` [PATCH 05/14] powerpc/64s: msgclr when handling doorbell exceptions Nicholas Piggin
2017-06-02 7:39 ` [PATCH 06/14] powerpc/64s: branch to idle handler with virtual mode offset Nicholas Piggin
2017-06-02 7:39 ` [PATCH 07/14] powerpc/64s: idle avoid SRR usage in idle sleep/wake paths Nicholas Piggin
2017-06-02 13:37 ` kbuild test robot
2017-06-02 7:39 ` [PATCH 08/14] powerpc/64s: idle set polling before enabling irqs Nicholas Piggin
2017-06-02 7:39 ` [PATCH 09/14] powerpc/64s: idle read mostly for common globals Nicholas Piggin
2017-06-02 7:39 ` [PATCH 10/14] powerpc/64: CTRL[RUN] run-latch setting optimisation Nicholas Piggin
2017-06-02 7:39 ` [PATCH 11/14] powerpc/64s: idle no memory barrier after break from idle Nicholas Piggin
2017-06-02 7:39 ` [PATCH 12/14] powerpc/64s: Leave IRQs hard enabled over context switch for radix Nicholas Piggin
2017-06-02 7:39 ` [PATCH 13/14] powerpc/64: context switch can avoid reservation clear Nicholas Piggin
2017-06-02 7:39 ` [PATCH 14/14] powerpc/64: context switch additional hwsync can be avoided Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170602073946.8983-3-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=anton@samba.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).