From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
"Gautham R . Shenoy" <ego@linux.vnet.ibm.com>,
"Shreyas B . Prabhu" <shreyas@linux.vnet.ibm.com>
Subject: [PATCH 04/14] powerpc/64s: idle process interrupts from system reset wakeup
Date: Fri, 9 Jun 2017 01:51:03 +1000 [thread overview]
Message-ID: <20170608155113.21300-5-npiggin@gmail.com> (raw)
In-Reply-To: <20170608155113.21300-1-npiggin@gmail.com>
When the CPU wakes from low power state, it begins at the system reset
interrupt with the exception that caused the wakeup encoded in SRR1.
Today, powernv idle wakeup ignores the wakeup reason (except a special
case for HMI), and the regular interrupt corresponding to the
exception will fire after the idle wakeup exits.
Change this to replay the interrupt from the idle wakeup before
interrupts are hard-enabled.
Test on POWER8 of context_switch selftests benchmark with polling idle
disabled (e.g., always nap, giving cross-CPU IPIs) gives the following
results:
original wakeup direct
Different threads, same core: 315k/s 264k/s
Different cores: 235k/s 242k/s
There is a slowdown for doorbell IPI (same core) case because system
reset wakeup does not clear the message and the doorbell interrupt
fires again needlessly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/hw_irq.h | 1 +
arch/powerpc/kernel/exceptions-64s.S | 28 ++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/idle.c | 12 ++++++++----
3 files changed, 37 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index eba60416536e..0ef9a33c139f 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -32,6 +32,7 @@
#ifndef __ASSEMBLY__
extern void __replay_interrupt(unsigned int vector);
+extern void __replay_wakeup_interrupt(unsigned long srr1);
extern void timer_interrupt(struct pt_regs *);
extern void performance_monitor_exception(struct pt_regs *regs);
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 2f700a15bfa3..3d75641c2566 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1646,3 +1646,31 @@ FTR_SECTION_ELSE
beq doorbell_super_common
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
blr
+
+/*
+ * Similar to __replay_interrupt but called from cpu idle wakeup
+ * with SRR1 wake value in r3.
+ */
+_GLOBAL(__replay_wakeup_interrupt)
+ extrdi r3,r3,42,4 /* Get SRR1 wake reason in low bits */
+ mfmsr r12
+ mflr r11
+ mfcr r9
+ ori r12,r12,MSR_EE
+ cmpwi r3,0x6
+ beq decrementer_common
+ cmpwi r3,0x8
+ beq hardware_interrupt_common
+BEGIN_FTR_SECTION
+ cmpwi r3,0x3
+ beq h_doorbell_common
+ cmpwi r3,0x9
+ beq h_virt_irq_common
+ cmpwi r3,0xa
+ beq hmi_exception_common
+FTR_SECTION_ELSE
+ cmpwi r3,0x5
+ beq doorbell_super_common
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
+ mtmsrd r12,1
+ blr
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 78b4755b7947..7c83a95f929e 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -272,8 +272,10 @@ static unsigned long __power7_idle_type(unsigned long type)
void power7_idle_type(unsigned long type)
{
- __power7_idle_type(type);
- __hard_irq_enable();
+ unsigned long srr1;
+
+ srr1 = __power7_idle_type(type);
+ __replay_wakeup_interrupt(srr1);
}
void power7_idle(void)
@@ -310,8 +312,10 @@ static unsigned long __power9_idle_type(unsigned long stop_psscr_val,
void power9_idle_type(unsigned long stop_psscr_val,
unsigned long stop_psscr_mask)
{
- __power9_idle_type(stop_psscr_val, stop_psscr_mask);
- __hard_irq_enable();
+ unsigned long srr1;
+
+ srr1 = __power9_idle_type(stop_psscr_val, stop_psscr_mask);
+ __replay_wakeup_interrupt(srr1);
}
/*
--
2.11.0
next prev parent reply other threads:[~2017-06-08 15:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 15:50 [PATCH 00/14] idle performance improvements Nicholas Piggin
2017-06-08 15:51 ` [PATCH 01/14] powerpc/64s: idle move soft interrupt mask logic into C code Nicholas Piggin
2017-06-08 15:51 ` [PATCH 02/14] powerpc/64s: idle hotplug lazy-irq simplification Nicholas Piggin
2017-06-08 15:51 ` [PATCH 03/14] powerpc/64s: idle provide a default idle for POWER9 Nicholas Piggin
2017-06-08 15:51 ` Nicholas Piggin [this message]
2017-06-08 15:51 ` [PATCH 05/14] powerpc/64s: msgclr when handling doorbell exceptions Nicholas Piggin
2017-06-08 15:51 ` [PATCH 06/14] powerpc/64s: interrupt replay balance the return branch predictor Nicholas Piggin
2017-06-08 15:51 ` [PATCH 07/14] powerpc/64s: idle branch to handler with virtual mode offset Nicholas Piggin
2017-06-08 15:51 ` [PATCH 08/14] powerpc/64s: idle avoid SRR usage in idle sleep/wake paths Nicholas Piggin
2017-06-08 15:51 ` [PATCH 09/14] powerpc/64s: idle hmi wakeup is unlikely Nicholas Piggin
2017-06-08 15:51 ` [PATCH 10/14] powerpc/64s: cpuidle set polling before enabling irqs Nicholas Piggin
2017-06-08 15:51 ` [PATCH 11/14] powerpc/64s: cpuidle read mostly for common globals Nicholas Piggin
2017-06-08 15:51 ` [PATCH 12/14] powerpc/64s: cpuidle no memory barrier after break from idle Nicholas Piggin
2017-06-08 15:51 ` [PATCH 13/14] powerpc/64: runlatch CTRL[RUN] set optimisation Nicholas Piggin
2017-06-08 15:51 ` [PATCH 14/14] powerpc/64s: idle runlatch switch is done with MSR[EE]=0 Nicholas Piggin
-- strict thread matches above, loose matches on Subject: below --
2017-06-11 23:58 [PATCH 00/14 v2] idle performance improvements Nicholas Piggin
2017-06-11 23:58 ` [PATCH 04/14] powerpc/64s: idle process interrupts from system reset wakeup Nicholas Piggin
2017-06-12 9:41 ` Gautham R Shenoy
2017-06-12 14:51 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170608155113.21300-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=ego@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=shreyas@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).