From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
"Gautham R . Shenoy" <ego@linux.vnet.ibm.com>,
"Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
Subject: [PATCH 00/13 v3] idle performance improvements
Date: Tue, 13 Jun 2017 23:05:44 +1000 [thread overview]
Message-ID: <20170613130557.26315-1-npiggin@gmail.com> (raw)
Since last time, I accounted for the various comments
in reviews, most importantly fixed the miscalculation
of SRR1 bit for the wakeup-interrupt. Verified it does
the right thing and replays the right wakeup interrupt
(e.g., decrementer) from __replay_interrupt stepping
through the instructions in the simulator.
I've found that performance testing is a little difficult
because the ping-pong test cases must sometimes get into
synchronization and run concurrently without sleeping.
Looking at context switch rates in vmstat, I run the
context-switch ping-poing test with snooze idle disabled
on a POWER8, and the numbers before and after this series
are:
different thread different core
vanilla 600K/s 470K/s
patched 780K/s 550K/s
(these are 2x what's reported by context_switch selftest
because each step switches to and from idle thread)
It's still not a perfect measurement because if there is
some unwanted concurrency happening then you can get
different amount of userspace work per context switch,
but there seems to be a decent speedup here.
Thanks,
Nick
Nicholas Piggin (13):
powerpc/64s: idle move soft interrupt mask logic into C code
powerpc/64s: idle hotplug lazy-irq simplification
powerpc/64s: idle process interrupts from system reset wakeup
powerpc/64s: msgclr when handling doorbell exceptions
powerpc/64s: interrupt replay balance the return branch predictor
powerpc/64s: idle branch to handler with virtual mode offset
powerpc/64s: idle avoid SRR usage in idle sleep/wake paths
powerpc/64s: idle hmi wakeup is unlikely
powerpc/64s: cpuidle set polling before enabling irqs
powerpc/64s: cpuidle read mostly for common globals
powerpc/64s: cpuidle no memory barrier after break from idle
powerpc/64: runlatch CTRL[RUN] set optimisation
powerpc/64s: idle runlatch switch is done with MSR[EE]=0
arch/powerpc/include/asm/dbell.h | 13 +++
arch/powerpc/include/asm/exception-64s.h | 13 +++
arch/powerpc/include/asm/hw_irq.h | 5 ++
arch/powerpc/include/asm/machdep.h | 1 +
arch/powerpc/include/asm/ppc-opcode.h | 3 +
arch/powerpc/include/asm/processor.h | 10 +--
arch/powerpc/kernel/asm-offsets.c | 1 +
arch/powerpc/kernel/exceptions-64s.S | 38 +++++++--
arch/powerpc/kernel/idle_book3s.S | 135 +++++++++----------------------
arch/powerpc/kernel/irq.c | 62 +++++++++++++-
arch/powerpc/kernel/process.c | 12 +--
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 8 +-
arch/powerpc/platforms/powernv/idle.c | 88 ++++++++++++++++++--
arch/powerpc/platforms/powernv/smp.c | 31 ++++---
arch/powerpc/platforms/powernv/subcore.c | 3 +-
drivers/cpuidle/cpuidle-powernv.c | 37 +++++----
drivers/cpuidle/cpuidle-pseries.c | 22 +++--
17 files changed, 315 insertions(+), 167 deletions(-)
--
2.11.0
next reply other threads:[~2017-06-13 13:06 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-13 13:05 Nicholas Piggin [this message]
2017-06-13 13:05 ` [PATCH 01/13] powerpc/64s: idle move soft interrupt mask logic into C code Nicholas Piggin
2017-06-19 12:25 ` [01/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 02/13] powerpc/64s: idle hotplug lazy-irq simplification Nicholas Piggin
2017-06-19 12:25 ` [02/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 03/13] powerpc/64s: idle process interrupts from system reset wakeup Nicholas Piggin
2017-06-13 13:28 ` Nicholas Piggin
2017-06-14 11:29 ` Michael Ellerman
2017-06-19 12:25 ` [03/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 04/13] powerpc/64s: msgclr when handling doorbell exceptions Nicholas Piggin
2017-06-19 12:25 ` [04/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 05/13] powerpc/64s: interrupt replay balance the return branch predictor Nicholas Piggin
2017-06-19 12:25 ` [05/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 06/13] powerpc/64s: idle branch to handler with virtual mode offset Nicholas Piggin
2017-06-19 12:25 ` [06/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 07/13] powerpc/64s: idle avoid SRR usage in idle sleep/wake paths Nicholas Piggin
2017-06-15 12:11 ` Nicholas Piggin
2017-06-19 12:25 ` [07/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 08/13] powerpc/64s: idle hmi wakeup is unlikely Nicholas Piggin
2017-06-19 12:25 ` [08/13] " Michael Ellerman
2017-06-13 13:05 ` [PATCH 09/13] powerpc/64s: cpuidle set polling before enabling irqs Nicholas Piggin
2017-06-14 11:40 ` Michael Ellerman
2017-06-14 11:50 ` Nicholas Piggin
2017-06-14 13:05 ` Michael Ellerman
2017-06-13 13:05 ` [PATCH 10/13] powerpc/64s: cpuidle read mostly for common globals Nicholas Piggin
2017-06-13 13:05 ` [PATCH 11/13] powerpc/64s: cpuidle no memory barrier after break from idle Nicholas Piggin
2017-06-13 13:05 ` [PATCH 12/13] powerpc/64: runlatch CTRL[RUN] set optimisation Nicholas Piggin
2017-06-14 11:38 ` Michael Ellerman
2017-06-14 13:44 ` Nicholas Piggin
2017-06-15 9:35 ` Michael Ellerman
2017-06-13 13:05 ` [PATCH 13/13] powerpc/64s: idle runlatch switch is done with MSR[EE]=0 Nicholas Piggin
2017-06-19 12:25 ` [13/13] " Michael Ellerman
-- strict thread matches above, loose matches on Subject: below --
2017-06-13 13:05 [PATCH 00/13 v3] idle performance improvements Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170613130557.26315-1-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=ego@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=svaidy@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).