linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH 04/13] powerpc/64: cleanup __check_irq_replay
Date: Sun,  6 Aug 2017 03:02:32 +1000	[thread overview]
Message-ID: <20170805170241.22966-5-npiggin@gmail.com> (raw)
In-Reply-To: <20170805170241.22966-1-npiggin@gmail.com>

Move the clearing of irq_happened bits into the condition where
they were found to be set. This reduces instruction count slightly,
and reduces stores into irq_happened.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/irq.c | 45 +++++++++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index f291f7826abc..7c46e0cce054 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -143,9 +143,10 @@ notrace unsigned int __check_irq_replay(void)
 	 */
 	unsigned char happened = local_paca->irq_happened;
 
-	/* Clear bit 0 which we wouldn't clear otherwise */
-	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
 	if (happened & PACA_IRQ_HARD_DIS) {
+		/* Clear bit 0 which we wouldn't clear otherwise */
+		local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+
 		/*
 		 * We may have missed a decrementer interrupt if hard disabled.
 		 * Check the decrementer register in case we had a rollover
@@ -173,39 +174,39 @@ notrace unsigned int __check_irq_replay(void)
 	 * This is a higher priority interrupt than the others, so
 	 * replay it first.
 	 */
-	local_paca->irq_happened &= ~PACA_IRQ_HMI;
-	if (happened & PACA_IRQ_HMI)
+	if (happened & PACA_IRQ_HMI) {
+		local_paca->irq_happened &= ~PACA_IRQ_HMI;
 		return 0xe60;
+	}
 
-	/*
-	 * We may have missed a decrementer interrupt. We check the
-	 * decrementer itself rather than the paca irq_happened field
-	 * in case we also had a rollover while hard disabled
-	 */
-	local_paca->irq_happened &= ~PACA_IRQ_DEC;
-	if (happened & PACA_IRQ_DEC)
+	if (happened & PACA_IRQ_DEC) {
+		local_paca->irq_happened &= ~PACA_IRQ_DEC;
 		return 0x900;
+	}
 
-	/* Finally check if an external interrupt happened */
-	local_paca->irq_happened &= ~PACA_IRQ_EE;
-	if (happened & PACA_IRQ_EE)
+	if (happened & PACA_IRQ_EE) {
+		local_paca->irq_happened &= ~PACA_IRQ_EE;
 		return 0x500;
+	}
 
 #ifdef CONFIG_PPC_BOOK3E
-	/* Finally check if an EPR external interrupt happened
-	 * this bit is typically set if we need to handle another
-	 * "edge" interrupt from within the MPIC "EPR" handler
+	/*
+	 * Check if an EPR external interrupt happened this bit is typically
+	 * set if we need to handle another "edge" interrupt from within the
+	 * MPIC "EPR" handler.
 	 */
-	local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
-	if (happened & PACA_IRQ_EE_EDGE)
+	if (happened & PACA_IRQ_EE_EDGE) {
+		local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE;
 		return 0x500;
+	}
 
-	local_paca->irq_happened &= ~PACA_IRQ_DBELL;
-	if (happened & PACA_IRQ_DBELL)
+	if (happened & PACA_IRQ_DBELL) {
+		local_paca->irq_happened &= ~PACA_IRQ_DBELL;
 		return 0x280;
+	}
 #else
-	local_paca->irq_happened &= ~PACA_IRQ_DBELL;
 	if (happened & PACA_IRQ_DBELL) {
+		local_paca->irq_happened &= ~PACA_IRQ_DBELL;
 		if (cpu_has_feature(CPU_FTR_HVMODE))
 			return 0xe80;
 		return 0xa00;
-- 
2.11.0

  parent reply	other threads:[~2017-08-05 17:03 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-05 17:02 [PATCH 00/13] idle and soft-irq improvements and POWER9 idle optimisation Nicholas Piggin
2017-08-05 17:02 ` [PATCH 01/13] powerpc/64s: masked interrupt avoid branch Nicholas Piggin
2017-08-05 17:02 ` [PATCH 02/13] powerpc/64s: masked interrupt avoid instruction Nicholas Piggin
2017-08-05 17:02 ` [PATCH 03/13] powerpc/64s: masked interrupt returns to kernel so avoid r13 restore Nicholas Piggin
2017-08-05 17:02 ` Nicholas Piggin [this message]
2017-08-05 17:02 ` [PATCH 05/13] powerpc/64s: irq replay merge HV and non-HV paths for doorbell replay Nicholas Piggin
2017-08-05 17:02 ` [PATCH 06/13] powerpc/64s: irq replay external use the HV handler in HV mode on POWER9 Nicholas Piggin
2017-08-05 17:02 ` [PATCH 07/13] powerpc/64: remove redundant instruction in interrupt replay Nicholas Piggin
2017-08-05 17:02 ` [PATCH 08/13] powerpc/64s: irq replay remove spurious irq reason Nicholas Piggin
2017-08-05 23:00   ` Benjamin Herrenschmidt
2017-08-06  0:51     ` Nicholas Piggin
2017-08-10 13:12       ` Michael Ellerman
2017-08-05 17:02 ` [PATCH 09/13] powerpc/64: runlatch CTRL[RUN] set optimisation Nicholas Piggin
2017-08-05 17:02 ` [PATCH 10/13] powerpc/64s: idle simplify KVM idle on POWER9 Nicholas Piggin
2017-08-08 10:36   ` Gautham R Shenoy
2017-08-08 12:42     ` Nicholas Piggin
2017-08-10  6:24       ` Gautham R Shenoy
2017-08-10 13:14   ` Michael Ellerman
2017-08-10 13:53     ` Nicholas Piggin
2017-08-05 17:02 ` [PATCH 11/13] powerpc/64s: idle POWER9 can execute stop without ptesync Nicholas Piggin
2017-08-08 10:37   ` Gautham R Shenoy
2017-08-10 13:15   ` Michael Ellerman
2017-08-10 14:03     ` Nicholas Piggin
2017-08-05 17:02 ` [PATCH 12/13] powerpc/64s: idle POWER9 can execute stop in virtual mode Nicholas Piggin
2017-08-05 22:57   ` Benjamin Herrenschmidt
2017-08-08 10:45   ` Gautham R Shenoy
2017-08-05 17:02 ` [PATCH 13/13] powerpc/64s: idle ESL=0 stop can avoid all save/restore overhead Nicholas Piggin
2017-08-05 17:11   ` Nicholas Piggin
2017-08-08 10:49   ` Gautham R Shenoy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170805170241.22966-5-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).