From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
"Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH 7/9] powerpc/64s: do not allocate lppaca if we are not virtualized
Date: Fri, 22 Dec 2017 21:17:14 +1000 [thread overview]
Message-ID: <20171222111716.13101-8-npiggin@gmail.com> (raw)
In-Reply-To: <20171222111716.13101-1-npiggin@gmail.com>
The "lppaca" is a structure registered with the hypervisor. This
is unnecessary when running on non-virtualised platforms. One field
from the lppaca (pmcregs_in_use) is also used by the host, so move
the host part out into the paca (lppaca field is still updated in
guest mode).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/paca.h | 8 ++++++--
arch/powerpc/include/asm/pmc.h | 13 ++++++++++++-
arch/powerpc/kernel/asm-offsets.c | 5 +++++
arch/powerpc/kernel/paca.c | 16 +++++++++++++---
arch/powerpc/kvm/book3s_hv_interrupts.S | 3 +--
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 3 +--
6 files changed, 38 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 3892db93b837..f83fc885fba8 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -58,7 +58,7 @@ struct task_struct;
* processor.
*/
struct paca_struct {
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
/*
* Because hw_cpu_id, unlike other paca fields, is accessed
* routinely from other CPUs (from the IRQ code), we stick to
@@ -67,7 +67,8 @@ struct paca_struct {
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-#endif /* CONFIG_PPC_BOOK3S */
+#endif /* CONFIG_PPC_PSERIES */
+
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
* load lock_token and paca_index with a single lwz
@@ -159,6 +160,9 @@ struct paca_struct {
u64 saved_r1; /* r1 save for RTAS calls or PM */
u64 saved_msr; /* MSR saved here by enter_rtas */
u16 trap_save; /* Used when bad stack is encountered */
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ u8 pmcregs_in_use; /* pseries puts this in lppaca */
+#endif
u8 soft_enabled; /* irq soft-enable flag */
u8 irq_happened; /* irq happened while soft-disabled */
u8 io_sync; /* writel() needs spin_unlock sync */
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index 5a9ede4962cb..7ac3586c38ab 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -31,10 +31,21 @@ void ppc_enable_pmcs(void);
#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/lppaca.h>
+#include <asm/firmware.h>
static inline void ppc_set_pmu_inuse(int inuse)
{
- get_lppaca()->pmcregs_in_use = inuse;
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE)
+ if (firmware_has_feature(FW_FEATURE_LPAR)) {
+#ifdef CONFIG_PPC_PSERIES
+ get_lppaca()->pmcregs_in_use = inuse;
+#endif
+ } else {
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ get_paca()->pmcregs_in_use = inuse;
+#endif
+ }
+#endif
}
extern void power4_enable_pmcs(void);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 3f6316bcde4e..a7c355c8c467 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -221,12 +221,17 @@ int main(void)
OFFSET(PACA_EXMC, paca_struct, exmc);
OFFSET(PACA_EXSLB, paca_struct, exslb);
OFFSET(PACA_EXNMI, paca_struct, exnmi);
+#ifdef CONFIG_PPC_PSERIES
OFFSET(PACALPPACAPTR, paca_struct, lppaca_ptr);
+#endif
OFFSET(PACA_SLBSHADOWPTR, paca_struct, slb_shadow_ptr);
OFFSET(SLBSHADOW_STACKVSID, slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid);
OFFSET(SLBSHADOW_STACKESID, slb_shadow, save_area[SLB_NUM_BOLTED - 1].esid);
OFFSET(SLBSHADOW_SAVEAREA, slb_shadow, save_area);
OFFSET(LPPACA_PMCINUSE, lppaca, pmcregs_in_use);
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ OFFSET(PACA_PMCINUSE, paca_struct, pmcregs_in_use);
+#endif
OFFSET(LPPACA_DTLIDX, lppaca, dtl_idx);
OFFSET(LPPACA_YIELDCOUNT, lppaca, yield_count);
OFFSET(PACA_DTL_RIDX, paca_struct, dtl_ridx);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 95ffedf14885..5900540e2ff8 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -20,7 +20,7 @@
#include "setup.h"
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
/*
* The structure which the hypervisor knows about - this structure
@@ -47,6 +47,9 @@ static long __initdata lppaca_size;
static void __init allocate_lppacas(int nr_cpus, unsigned long limit)
{
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return;
+
if (nr_cpus <= NR_LPPACAS)
return;
@@ -60,6 +63,9 @@ static struct lppaca * __init new_lppaca(int cpu)
{
struct lppaca *lp;
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return NULL;
+
if (cpu < NR_LPPACAS)
return &lppaca[cpu];
@@ -73,6 +79,9 @@ static void __init free_lppacas(void)
{
long new_size = 0, nr;
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return;
+
if (!lppaca_size)
return;
nr = num_possible_cpus() - NR_LPPACAS;
@@ -157,9 +166,10 @@ EXPORT_SYMBOL(paca);
void __init initialise_paca(struct paca_struct *new_paca, int cpu)
{
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
new_paca->lppaca_ptr = new_lppaca(cpu);
-#else
+#endif
+#ifdef CONFIG_PPC_BOOK3E
new_paca->kernel_pgd = swapper_pg_dir;
#endif
new_paca->lock_token = 0x8000;
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index dc54373c8780..0e8493033288 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -79,8 +79,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r5, 0
mtspr SPRN_MMCRA, r5
isync
- ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
- lbz r5, LPPACA_PMCINUSE(r3)
+ lbz r5, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r5, 0
beq 31f /* skip if not */
mfspr r5, SPRN_MMCR1
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 2659844784b8..fc772448de8b 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -113,8 +113,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
mtspr SPRN_SPRG_VDSO_WRITE,r3
/* Reload the host's PMU registers */
- ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
- lbz r4, LPPACA_PMCINUSE(r3)
+ lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r4, 0
beq 23f /* skip if not */
BEGIN_FTR_SECTION
--
2.15.0
next prev parent reply other threads:[~2017-12-22 11:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-22 11:17 [PATCH 0/9] modernize early memory allocation limits and Nicholas Piggin
2017-12-22 11:17 ` [PATCH 1/9] powerpc/powernv: Remove real mode access limit for early allocations Nicholas Piggin
2018-01-22 3:34 ` [1/9] " Michael Ellerman
2017-12-22 11:17 ` [PATCH 2/9] powerpc/pseries: radix is not subject to RMA limit, remove it Nicholas Piggin
2017-12-22 11:17 ` [PATCH 3/9] powerpc/64: rtas avoid accessing paca in 32-bit mode Nicholas Piggin
2017-12-22 11:17 ` [PATCH 4/9] powerpc/pseries: lift RTAS limit for radix Nicholas Piggin
2017-12-22 11:17 ` [PATCH 5/9] powerpc/pseries: lift RTAS limit for hash Nicholas Piggin
2017-12-22 11:17 ` [PATCH 6/9] powerpc/64s: Relax PACA address limitations Nicholas Piggin
2017-12-22 11:17 ` Nicholas Piggin [this message]
2017-12-22 11:17 ` [PATCH 8/9] powerpc/64: Use array of paca pointers and allocate pacas individually Nicholas Piggin
2017-12-22 11:17 ` [PATCH 9/9] powerpc/64s: Use array of lppaca pointers and allocate lppacas individually Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171222111716.13101-8-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).