From: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: seroyer@linux.vnet.ibm.com, jjalvare@linux.vnet.ibm.com,
alex.williamson@redhat.com, helgaas@kernel.org, aik@ozlabs.ru,
ruscur@russell.cc, linux-pci@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, bodong@mellanox.com,
eli@mellanox.com, saeedm@mellanox.com,
"Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Subject: [PATCH v4 1/7] platform/pseries: Update VF config space after EEH
Date: Fri, 5 Jan 2018 10:45:46 -0600 [thread overview]
Message-ID: <20180105164552.36371-2-bryantly@linux.vnet.ibm.com> (raw)
In-Reply-To: <20180105164552.36371-1-bryantly@linux.vnet.ibm.com>
Add EEH platform operations for pseries to update VF
config space. With this change after EEH, the VF
will have updated config space for pseries platform.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/eeh.h | 1 +
arch/powerpc/kernel/eeh.c | 59 +++++++++++++++++++++++++
arch/powerpc/platforms/powernv/eeh-powernv.c | 65 ++--------------------------
arch/powerpc/platforms/pseries/eeh_pseries.c | 26 ++++++++++-
4 files changed, 88 insertions(+), 63 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 5161c37dd039..82829c65f31a 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -297,6 +297,7 @@ int eeh_pe_reset(struct eeh_pe *pe, int option);
int eeh_pe_configure(struct eeh_pe *pe);
int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
unsigned long addr, unsigned long mask);
+int eeh_restore_vf_config(struct pci_dn *pdn);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index cbca0a667682..cc649809885e 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -740,6 +740,65 @@ static void *eeh_restore_dev_state(void *data, void *userdata)
return NULL;
}
+int eeh_restore_vf_config(struct pci_dn *pdn)
+{
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ u32 devctl, cmd, cap2, aer_capctl;
+ int old_mps;
+
+ if (edev->pcie_cap) {
+ /* Restore MPS */
+ old_mps = (ffs(pdn->mps) - 8) << 5;
+ eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+ 2, &devctl);
+ devctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
+ devctl |= old_mps;
+ eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+ 2, devctl);
+
+ /* Disable Completion Timeout */
+ eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP2,
+ 4, &cap2);
+ if (cap2 & 0x10) {
+ eeh_ops->read_config(pdn,
+ edev->pcie_cap + PCI_EXP_DEVCTL2,
+ 4, &cap2);
+ cap2 |= 0x10;
+ eeh_ops->write_config(pdn,
+ edev->pcie_cap + PCI_EXP_DEVCTL2,
+ 4, cap2);
+ }
+ }
+
+ /* Enable SERR and parity checking */
+ eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd);
+ cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+ eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd);
+
+ /* Enable report various errors */
+ if (edev->pcie_cap) {
+ eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+ 2, &devctl);
+ devctl &= ~PCI_EXP_DEVCTL_CERE;
+ devctl |= (PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE);
+ eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+ 2, devctl);
+ }
+
+ /* Enable ECRC generation and check */
+ if (edev->pcie_cap && edev->aer_cap) {
+ eeh_ops->read_config(pdn, edev->aer_cap + PCI_ERR_CAP,
+ 4, &aer_capctl);
+ aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
+ eeh_ops->write_config(pdn, edev->aer_cap + PCI_ERR_CAP,
+ 4, aer_capctl);
+ }
+
+ return 0;
+}
+
/**
* pcibios_set_pcie_reset_state - Set PCI-E reset state
* @dev: pci device struct
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 961e64115d92..0665b6d03cb3 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -1655,70 +1655,11 @@ static int pnv_eeh_next_error(struct eeh_pe **pe)
return ret;
}
-static int pnv_eeh_restore_vf_config(struct pci_dn *pdn)
-{
- struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
- u32 devctl, cmd, cap2, aer_capctl;
- int old_mps;
-
- if (edev->pcie_cap) {
- /* Restore MPS */
- old_mps = (ffs(pdn->mps) - 8) << 5;
- eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
- 2, &devctl);
- devctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
- devctl |= old_mps;
- eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
- 2, devctl);
-
- /* Disable Completion Timeout */
- eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP2,
- 4, &cap2);
- if (cap2 & 0x10) {
- eeh_ops->read_config(pdn,
- edev->pcie_cap + PCI_EXP_DEVCTL2,
- 4, &cap2);
- cap2 |= 0x10;
- eeh_ops->write_config(pdn,
- edev->pcie_cap + PCI_EXP_DEVCTL2,
- 4, cap2);
- }
- }
-
- /* Enable SERR and parity checking */
- eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd);
- cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
- eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd);
-
- /* Enable report various errors */
- if (edev->pcie_cap) {
- eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
- 2, &devctl);
- devctl &= ~PCI_EXP_DEVCTL_CERE;
- devctl |= (PCI_EXP_DEVCTL_NFERE |
- PCI_EXP_DEVCTL_FERE |
- PCI_EXP_DEVCTL_URRE);
- eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
- 2, devctl);
- }
-
- /* Enable ECRC generation and check */
- if (edev->pcie_cap && edev->aer_cap) {
- eeh_ops->read_config(pdn, edev->aer_cap + PCI_ERR_CAP,
- 4, &aer_capctl);
- aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
- eeh_ops->write_config(pdn, edev->aer_cap + PCI_ERR_CAP,
- 4, aer_capctl);
- }
-
- return 0;
-}
-
static int pnv_eeh_restore_config(struct pci_dn *pdn)
{
struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
struct pnv_phb *phb;
- s64 ret;
+ s64 ret = 0;
int config_addr = (pdn->busno << 8) | (pdn->devfn);
if (!edev)
@@ -1732,7 +1673,7 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn)
* to be exported by firmware in extendible way.
*/
if (edev->physfn) {
- ret = pnv_eeh_restore_vf_config(pdn);
+ ret = eeh_restore_vf_config(pdn);
} else {
phb = pdn->phb->private_data;
ret = opal_pci_reinit(phb->opal_id,
@@ -1745,7 +1686,7 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn)
return -EIO;
}
- return 0;
+ return ret;
}
static struct eeh_ops pnv_eeh_ops = {
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 2295f117e2d3..a671ef4f57f5 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -708,6 +708,30 @@ static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32
return rtas_write_config(pdn, where, size, val);
}
+static int pseries_eeh_restore_config(struct pci_dn *pdn)
+{
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+ s64 ret = 0;
+
+ if (!edev)
+ return -EEXIST;
+
+ /*
+ * FIXME: The MPS, error routing rules, timeout setting are worthy
+ * to be exported by firmware in extendible way.
+ */
+ if (edev->physfn)
+ ret = eeh_restore_vf_config(pdn);
+
+ if (ret) {
+ pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
+ __func__, edev->pe_config_addr, ret);
+ return -EIO;
+ }
+
+ return ret;
+}
+
static struct eeh_ops pseries_eeh_ops = {
.name = "pseries",
.init = pseries_eeh_init,
@@ -723,7 +747,7 @@ static struct eeh_ops pseries_eeh_ops = {
.read_config = pseries_eeh_read_config,
.write_config = pseries_eeh_write_config,
.next_error = NULL,
- .restore_config = NULL
+ .restore_config = pseries_eeh_restore_config
};
/**
--
2.14.3 (Apple Git-98)
next prev parent reply other threads:[~2018-01-05 16:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-05 16:45 [PATCH v4 0/7] SR-IOV Enablement on PowerVM Bryant G. Ly
2018-01-05 16:45 ` Bryant G. Ly [this message]
2018-01-29 4:13 ` [v4,1/7] platform/pseries: Update VF config space after EEH Michael Ellerman
2018-01-05 16:45 ` [PATCH v4 2/7] linux/pci: Add uevents in AER and EEH error/resume Bryant G. Ly
2018-01-05 18:15 ` Bjorn Helgaas
2018-01-05 16:45 ` [PATCH v4 3/7] platforms/pseries: Set eeh_pe of EEH_PE_VF type Bryant G. Ly
2018-01-24 1:14 ` Michael Ellerman
2018-01-24 14:53 ` Bryant G. Ly
2018-01-05 16:45 ` [PATCH v4 4/7] powerpc/kernel Add EEH operations to notify resume Bryant G. Ly
2018-01-05 16:45 ` [PATCH v4 5/7] powerpc/kernel: Add EEH notify resume sysfs Bryant G. Ly
2018-01-05 16:45 ` [PATCH v4 6/7] pseries/pci: Associate PEs to VFs in configure SR-IOV Bryant G. Ly
2018-01-05 16:45 ` [PATCH v4 7/7] pseries/setup: Add Initialization of VF Bars Bryant G. Ly
2018-01-29 4:13 ` [v4,7/7] " Michael Ellerman
2018-01-17 17:29 ` [PATCH v4 0/7] SR-IOV Enablement on PowerVM Bryant G. Ly
2018-01-24 1:18 ` Russell Currey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180105164552.36371-2-bryantly@linux.vnet.ibm.com \
--to=bryantly@linux.vnet.ibm.com \
--cc=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=benh@kernel.crashing.org \
--cc=bodong@mellanox.com \
--cc=eli@mellanox.com \
--cc=helgaas@kernel.org \
--cc=jjalvare@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=ruscur@russell.cc \
--cc=saeedm@mellanox.com \
--cc=seroyer@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).