* powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory
@ 2018-02-09 11:52 Mathieu Malaterre
2018-02-09 14:48 ` Segher Boessenkool
0 siblings, 1 reply; 5+ messages in thread
From: Mathieu Malaterre @ 2018-02-09 11:52 UTC (permalink / raw)
To: linuxppc-dev
Hi there,
Is anyone using O= output directory option ?
It seems that git/master is failing:
$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
(...)
Entry Point: 00b001e8
DTC arch/powerpc/boot/asp834x-redboot.dtb
WRAP arch/powerpc/boot/dtbImage.asp834x-redboot
INFO: Uncompressed kernel (size 0xa51720) overlaps the address of the
wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0xb00000)
WRAP arch/powerpc/boot/zImage.coff
powerpc-linux-gnu-ld: cannot open linker script file
arch/powerpc/boot/zImage.coff.lds: No such file or directory
../arch/powerpc/boot/Makefile:375: recipe for target
'arch/powerpc/boot/zImage.coff' failed
make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1
rm arch/powerpc/boot/pq2fads.dtb arch/powerpc/boot/mpc836x_mds.dtb
arch/powerpc/boot/mpc832x_mds.dtb arch/powerpc/boot/mpc832x_rdb.dtb
arch/powerpc/boot/mpc834x_mds.dtb
arch/powerpc/boot/asp834x-redboot.dtb arch/powerpc/boot/mpc8272ads.dtb
arch/powerpc/boot/mpc8349emitx.dtb
arch/powerpc/boot/mpc8349emitxgp.dtb arch/powerpc/boot/ep8248e.dtb
arch/powerpc/Makefile:291: recipe for target 'zImage' failed
make[1]: *** [zImage] Error 2
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory
2018-02-09 11:52 powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory Mathieu Malaterre
@ 2018-02-09 14:48 ` Segher Boessenkool
2018-02-09 15:55 ` Mathieu Malaterre
0 siblings, 1 reply; 5+ messages in thread
From: Segher Boessenkool @ 2018-02-09 14:48 UTC (permalink / raw)
To: Mathieu Malaterre; +Cc: linuxppc-dev
Hi!
On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:
> Is anyone using O= output directory option ?
Yes, always.
> It seems that git/master is failing:
>
> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
Works fine for me (exact same arch and defconfig). Two differences:
1) I also set CROSS_COMPILE during the config step;
2) I don't build zImage, just the default (but manual "make zImage"
afterwards works fine).
> WRAP arch/powerpc/boot/zImage.coff
> powerpc-linux-gnu-ld: cannot open linker script file
> arch/powerpc/boot/zImage.coff.lds: No such file or directory
> ../arch/powerpc/boot/Makefile:375: recipe for target
> 'arch/powerpc/boot/zImage.coff' failed
> make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1
Add V=1?
Segher
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory
2018-02-09 14:48 ` Segher Boessenkool
@ 2018-02-09 15:55 ` Mathieu Malaterre
2018-02-09 16:23 ` Mathieu Malaterre
2018-02-09 20:56 ` Segher Boessenkool
0 siblings, 2 replies; 5+ messages in thread
From: Mathieu Malaterre @ 2018-02-09 15:55 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: linuxppc-dev
Segher,
On Fri, Feb 9, 2018 at 3:48 PM, Segher Boessenkool
<segher@kernel.crashing.org> wrote:
> Hi!
>
> On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:
>> Is anyone using O= output directory option ?
>
> Yes, always.
Great !
>> It seems that git/master is failing:
>>
>> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
>> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
>
> Works fine for me (exact same arch and defconfig). Two differences:
> 1) I also set CROSS_COMPILE during the config step;
> 2) I don't build zImage, just the default (but manual "make zImage"
> afterwards works fine).
Could you run command (2) a second time on your system.
>> WRAP arch/powerpc/boot/zImage.coff
>> powerpc-linux-gnu-ld: cannot open linker script file
>> arch/powerpc/boot/zImage.coff.lds: No such file or directory
>> ../arch/powerpc/boot/Makefile:375: recipe for target
>> 'arch/powerpc/boot/zImage.coff' failed
>> make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1
>
> Add V=1?
Full steps:
$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
-> ok so far
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
CHK include/config/kernel.release
GEN ./Makefile
CHK include/generated/uapi/linux/version.h
Using .. as source for kernel
.. is not clean, please run 'make mrproper'
in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
Then even after a mrproper I enter in an odd state:
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- mrproper
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
rm -f .tmp_symbols.txt
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN include/config include/generated arch/powerpc/include/generated
CLEAN .config
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
mathieu@vostrodell:~/tmp/linux$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
HOSTCC scripts/basic/fixdep
GEN ./Makefile
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
LEX scripts/kconfig/zconf.lex.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- V=1
make -C /home/mathieu/tmp/linux/ppc6xx KBUILD_SRC=/home/mathieu/tmp/linux \
-f /home/mathieu/tmp/linux/Makefile
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
set -e; : ' CHK include/config/kernel.release'; mkdir -p
include/config/; echo "4.15.0$(/bin/bash ../scripts/setlocalversion
..)" < include/config/auto.conf > include/config/kernel.release.tmp;
if [ -r include/config/kernel.release ] && cmp -s
include/config/kernel.release include/config/kernel.release.tmp; then
rm -f include/config/kernel.release.tmp; else : ' UPD
include/config/kernel.release'; mv -f
include/config/kernel.release.tmp include/config/kernel.release; fi
ln -fsn .. source
make -f ../scripts/Makefile.asm-generic \
src=uapi/asm obj=arch/powerpc/include/generated/uapi/asm
/bin/bash ../scripts/mkmakefile \
.. . 4 15
GEN ./Makefile
set -e; : ' CHK include/generated/uapi/linux/version.h'; mkdir -p
include/generated/uapi/linux/; (echo \#define LINUX_VERSION_CODE
265984; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8)
+ (c))';) < ../Makefile > include/generated/uapi/linux/version.h.tmp;
if [ -r include/generated/uapi/linux/version.h ] && cmp -s
include/generated/uapi/linux/version.h
include/generated/uapi/linux/version.h.tmp; then rm -f
include/generated/uapi/linux/version.h.tmp; else : ' UPD
include/generated/uapi/linux/version.h'; mv -f
include/generated/uapi/linux/version.h.tmp
include/generated/uapi/linux/version.h; fi
make -f ../scripts/Makefile.build obj=scripts/basic
rm -f include/linux/version.h
awk '!x[$0]++' init/modules.builtin usr/modules.builtin
arch/powerpc/kernel/modules.builtin arch/powerpc/mm/modules.builtin
arch/powerpc/lib/modules.builtin arch/powerpc/sysdev/modules.builtin
arch/powerpc/platforms/modules.builtin
arch/powerpc/math-emu/modules.builtin
arch/powerpc/crypto/modules.builtin arch/powerpc/net/modules.builtin
arch/powerpc/xmon/modules.builtin arch/powerpc/perf/modules.builtin
kernel/modules.builtin certs/modules.builtin mm/modules.builtin
fs/modules.builtin ipc/modules.builtin security/modules.builtin
crypto/modules.builtin block/modules.builtin drivers/modules.builtin
sound/modules.builtin firmware/modules.builtin
arch/powerpc/oprofile/modules.builtin net/modules.builtin
lib/modules.builtin virt/modules.builtin > ./modules.builtin
(cat /dev/null; ) > scripts/basic/modules.order
rm -f .tmp_quiet_recordmcount
make -f ../scripts/Makefile.asm-generic \
src=asm obj=arch/powerpc/include/generated/asm
if [ -f ../.config -o -d ../include/config ]; then \
echo >&2 " .. is not clean, please run 'make mrproper'"; \
echo >&2 " in the '..' directory.";\
/bin/false; \
fi;
.. is not clean, please run 'make mrproper'
in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
Current commit is f1517df8701c9f12dae9ce7f43a5d300a6917619 on my side,
no local change.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory
2018-02-09 15:55 ` Mathieu Malaterre
@ 2018-02-09 16:23 ` Mathieu Malaterre
2018-02-09 20:56 ` Segher Boessenkool
1 sibling, 0 replies; 5+ messages in thread
From: Mathieu Malaterre @ 2018-02-09 16:23 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: linuxppc-dev
On Fri, Feb 9, 2018 at 4:55 PM, Mathieu Malaterre <malat@debian.org> wrote:
> Segher,
>
> On Fri, Feb 9, 2018 at 3:48 PM, Segher Boessenkool
> <segher@kernel.crashing.org> wrote:
>> Hi!
>>
>> On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:
>>> Is anyone using O= output directory option ?
>>
>> Yes, always.
>
> Great !
>
>>> It seems that git/master is failing:
>>>
>>> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
>>> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
>>
>> Works fine for me (exact same arch and defconfig). Two differences:
>> 1) I also set CROSS_COMPILE during the config step;
>> 2) I don't build zImage, just the default (but manual "make zImage"
>> afterwards works fine).
>
> Could you run command (2) a second time on your system.
>
>>> WRAP arch/powerpc/boot/zImage.coff
>>> powerpc-linux-gnu-ld: cannot open linker script file
>>> arch/powerpc/boot/zImage.coff.lds: No such file or directory
>>> ../arch/powerpc/boot/Makefile:375: recipe for target
>>> 'arch/powerpc/boot/zImage.coff' failed
>>> make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1
>>
>> Add V=1?
>
> Full steps:
>
> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
> -> ok so far
> $ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
> make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
> CHK include/config/kernel.release
> GEN ./Makefile
> CHK include/generated/uapi/linux/version.h
> Using .. as source for kernel
> .. is not clean, please run 'make mrproper'
> in the '..' directory.
> /home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
> make[1]: *** [prepare3] Error 1
> make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
> Makefile:146: recipe for target 'sub-make' failed
> make: *** [sub-make] Error 2
>
> Then even after a mrproper I enter in an odd state:
>
> $ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- mrproper
> make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
> rm -f .tmp_symbols.txt
> CLEAN scripts/basic
> CLEAN scripts/kconfig
> CLEAN include/config include/generated arch/powerpc/include/generated
> CLEAN .config
> make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
> mathieu@vostrodell:~/tmp/linux$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
> make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
> HOSTCC scripts/basic/fixdep
> GEN ./Makefile
> HOSTCC scripts/kconfig/conf.o
> YACC scripts/kconfig/zconf.tab.c
> LEX scripts/kconfig/zconf.lex.c
> HOSTCC scripts/kconfig/zconf.tab.o
> HOSTLD scripts/kconfig/conf
> #
> # configuration written to .config
> #
> make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
> $ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- V=1
> make -C /home/mathieu/tmp/linux/ppc6xx KBUILD_SRC=/home/mathieu/tmp/linux \
> -f /home/mathieu/tmp/linux/Makefile
> make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
> set -e; : ' CHK include/config/kernel.release'; mkdir -p
> include/config/; echo "4.15.0$(/bin/bash ../scripts/setlocalversion
> ..)" < include/config/auto.conf > include/config/kernel.release.tmp;
> if [ -r include/config/kernel.release ] && cmp -s
> include/config/kernel.release include/config/kernel.release.tmp; then
> rm -f include/config/kernel.release.tmp; else : ' UPD
> include/config/kernel.release'; mv -f
> include/config/kernel.release.tmp include/config/kernel.release; fi
> ln -fsn .. source
> make -f ../scripts/Makefile.asm-generic \
> src=uapi/asm obj=arch/powerpc/include/generated/uapi/asm
> /bin/bash ../scripts/mkmakefile \
> .. . 4 15
> GEN ./Makefile
> set -e; : ' CHK include/generated/uapi/linux/version.h'; mkdir -p
> include/generated/uapi/linux/; (echo \#define LINUX_VERSION_CODE
> 265984; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8)
> + (c))';) < ../Makefile > include/generated/uapi/linux/version.h.tmp;
> if [ -r include/generated/uapi/linux/version.h ] && cmp -s
> include/generated/uapi/linux/version.h
> include/generated/uapi/linux/version.h.tmp; then rm -f
> include/generated/uapi/linux/version.h.tmp; else : ' UPD
> include/generated/uapi/linux/version.h'; mv -f
> include/generated/uapi/linux/version.h.tmp
> include/generated/uapi/linux/version.h; fi
> make -f ../scripts/Makefile.build obj=scripts/basic
> rm -f include/linux/version.h
> awk '!x[$0]++' init/modules.builtin usr/modules.builtin
> arch/powerpc/kernel/modules.builtin arch/powerpc/mm/modules.builtin
> arch/powerpc/lib/modules.builtin arch/powerpc/sysdev/modules.builtin
> arch/powerpc/platforms/modules.builtin
> arch/powerpc/math-emu/modules.builtin
> arch/powerpc/crypto/modules.builtin arch/powerpc/net/modules.builtin
> arch/powerpc/xmon/modules.builtin arch/powerpc/perf/modules.builtin
> kernel/modules.builtin certs/modules.builtin mm/modules.builtin
> fs/modules.builtin ipc/modules.builtin security/modules.builtin
> crypto/modules.builtin block/modules.builtin drivers/modules.builtin
> sound/modules.builtin firmware/modules.builtin
> arch/powerpc/oprofile/modules.builtin net/modules.builtin
> lib/modules.builtin virt/modules.builtin > ./modules.builtin
> (cat /dev/null; ) > scripts/basic/modules.order
> rm -f .tmp_quiet_recordmcount
> make -f ../scripts/Makefile.asm-generic \
> src=asm obj=arch/powerpc/include/generated/asm
> if [ -f ../.config -o -d ../include/config ]; then \
> echo >&2 " .. is not clean, please run 'make mrproper'"; \
> echo >&2 " in the '..' directory.";\
> /bin/false; \
> fi;
> .. is not clean, please run 'make mrproper'
> in the '..' directory.
> /home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
> make[1]: *** [prepare3] Error 1
> make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
> Makefile:146: recipe for target 'sub-make' failed
> make: *** [sub-make] Error 2
>
>
> Current commit is f1517df8701c9f12dae9ce7f43a5d300a6917619 on my side,
> no local change.
After yet another 'make mrproper' I can no longer reproduce the build failure.
Sorry for wasting your time :(
-M
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory
2018-02-09 15:55 ` Mathieu Malaterre
2018-02-09 16:23 ` Mathieu Malaterre
@ 2018-02-09 20:56 ` Segher Boessenkool
1 sibling, 0 replies; 5+ messages in thread
From: Segher Boessenkool @ 2018-02-09 20:56 UTC (permalink / raw)
To: Mathieu Malaterre; +Cc: linuxppc-dev
On Fri, Feb 09, 2018 at 04:55:20PM +0100, Mathieu Malaterre wrote:
> >> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
> >> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
> >
> > Works fine for me (exact same arch and defconfig). Two differences:
> > 1) I also set CROSS_COMPILE during the config step;
> > 2) I don't build zImage, just the default (but manual "make zImage"
> > afterwards works fine).
>
> Could you run command (2) a second time on your system.
That works fine, also with -j$BIG .
> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
> -> ok so far
> $ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
Ah. I configure with O=, but then cd to that dir and build without O= .
Also not in a subdir of the kernel source tree.
make ARCH=$ARCH CROSS_COMPILE=$TARGET- -C $KERNEL_SRC O=$PWD $DEFCONFIG
make ARCH=$ARCH CROSS_COMPILE=$TARGET- $MAKEOPTS
(everything run in the build dir).
Segher
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-02-09 20:57 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-09 11:52 powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory Mathieu Malaterre
2018-02-09 14:48 ` Segher Boessenkool
2018-02-09 15:55 ` Mathieu Malaterre
2018-02-09 16:23 ` Mathieu Malaterre
2018-02-09 20:56 ` Segher Boessenkool
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).