From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [RFC PATCH 01/12] powerpc/64s: do not allocate lppaca if we are not virtualized
Date: Tue, 13 Feb 2018 03:08:11 +1000 [thread overview]
Message-ID: <20180212170822.14612-2-npiggin@gmail.com> (raw)
In-Reply-To: <20180212170822.14612-1-npiggin@gmail.com>
The "lppaca" is a structure registered with the hypervisor. This
is unnecessary when running on non-virtualised platforms. One field
from the lppaca (pmcregs_in_use) is also used by the host, so move
the host part out into the paca (lppaca field is still updated in
guest mode).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/paca.h | 9 +++++++--
arch/powerpc/include/asm/pmc.h | 13 ++++++++++++-
arch/powerpc/kernel/asm-offsets.c | 5 +++++
arch/powerpc/kernel/paca.c | 16 +++++++++++++---
arch/powerpc/kvm/book3s_hv_interrupts.S | 3 +--
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 3 +--
6 files changed, 39 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index b62c31037cad..57fe8aa0c257 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -58,7 +58,7 @@ struct task_struct;
* processor.
*/
struct paca_struct {
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
/*
* Because hw_cpu_id, unlike other paca fields, is accessed
* routinely from other CPUs (from the IRQ code), we stick to
@@ -67,7 +67,8 @@ struct paca_struct {
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-#endif /* CONFIG_PPC_BOOK3S */
+#endif /* CONFIG_PPC_PSERIES */
+
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
* load lock_token and paca_index with a single lwz
@@ -160,10 +161,14 @@ struct paca_struct {
u64 saved_msr; /* MSR saved here by enter_rtas */
u16 trap_save; /* Used when bad stack is encountered */
u8 irq_soft_mask; /* mask for irq soft masking */
+ u8 soft_enabled; /* irq soft-enable flag */
u8 irq_happened; /* irq happened while soft-disabled */
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
u8 nap_state_lost; /* NV GPR values lost in power7_idle */
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ u8 pmcregs_in_use; /* pseries puts this in lppaca */
+#endif
u64 sprg_vdso; /* Saved user-visible sprg */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
u64 tm_scratch; /* TM scratch area for reclaim */
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index 5a9ede4962cb..7ac3586c38ab 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -31,10 +31,21 @@ void ppc_enable_pmcs(void);
#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/lppaca.h>
+#include <asm/firmware.h>
static inline void ppc_set_pmu_inuse(int inuse)
{
- get_lppaca()->pmcregs_in_use = inuse;
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE)
+ if (firmware_has_feature(FW_FEATURE_LPAR)) {
+#ifdef CONFIG_PPC_PSERIES
+ get_lppaca()->pmcregs_in_use = inuse;
+#endif
+ } else {
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ get_paca()->pmcregs_in_use = inuse;
+#endif
+ }
+#endif
}
extern void power4_enable_pmcs(void);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 88b84ac76b53..b9b52490acfd 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -221,12 +221,17 @@ int main(void)
OFFSET(PACA_EXMC, paca_struct, exmc);
OFFSET(PACA_EXSLB, paca_struct, exslb);
OFFSET(PACA_EXNMI, paca_struct, exnmi);
+#ifdef CONFIG_PPC_PSERIES
OFFSET(PACALPPACAPTR, paca_struct, lppaca_ptr);
+#endif
OFFSET(PACA_SLBSHADOWPTR, paca_struct, slb_shadow_ptr);
OFFSET(SLBSHADOW_STACKVSID, slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid);
OFFSET(SLBSHADOW_STACKESID, slb_shadow, save_area[SLB_NUM_BOLTED - 1].esid);
OFFSET(SLBSHADOW_SAVEAREA, slb_shadow, save_area);
OFFSET(LPPACA_PMCINUSE, lppaca, pmcregs_in_use);
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ OFFSET(PACA_PMCINUSE, paca_struct, pmcregs_in_use);
+#endif
OFFSET(LPPACA_DTLIDX, lppaca, dtl_idx);
OFFSET(LPPACA_YIELDCOUNT, lppaca, yield_count);
OFFSET(PACA_DTL_RIDX, paca_struct, dtl_ridx);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 95ffedf14885..5900540e2ff8 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -20,7 +20,7 @@
#include "setup.h"
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
/*
* The structure which the hypervisor knows about - this structure
@@ -47,6 +47,9 @@ static long __initdata lppaca_size;
static void __init allocate_lppacas(int nr_cpus, unsigned long limit)
{
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return;
+
if (nr_cpus <= NR_LPPACAS)
return;
@@ -60,6 +63,9 @@ static struct lppaca * __init new_lppaca(int cpu)
{
struct lppaca *lp;
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return NULL;
+
if (cpu < NR_LPPACAS)
return &lppaca[cpu];
@@ -73,6 +79,9 @@ static void __init free_lppacas(void)
{
long new_size = 0, nr;
+ if (early_cpu_has_feature(CPU_FTR_HVMODE))
+ return;
+
if (!lppaca_size)
return;
nr = num_possible_cpus() - NR_LPPACAS;
@@ -157,9 +166,10 @@ EXPORT_SYMBOL(paca);
void __init initialise_paca(struct paca_struct *new_paca, int cpu)
{
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_PSERIES
new_paca->lppaca_ptr = new_lppaca(cpu);
-#else
+#endif
+#ifdef CONFIG_PPC_BOOK3E
new_paca->kernel_pgd = swapper_pg_dir;
#endif
new_paca->lock_token = 0x8000;
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index dc54373c8780..0e8493033288 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -79,8 +79,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r5, 0
mtspr SPRN_MMCRA, r5
isync
- ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
- lbz r5, LPPACA_PMCINUSE(r3)
+ lbz r5, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r5, 0
beq 31f /* skip if not */
mfspr r5, SPRN_MMCR1
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 7886b313d135..bb2ed7d1b96a 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -113,8 +113,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
mtspr SPRN_SPRG_VDSO_WRITE,r3
/* Reload the host's PMU registers */
- ld r3, PACALPPACAPTR(r13) /* is the host using the PMU? */
- lbz r4, LPPACA_PMCINUSE(r3)
+ lbz r4, PACA_PMCINUSE(r13) /* is the host using the PMU? */
cmpwi r4, 0
beq 23f /* skip if not */
BEGIN_FTR_SECTION
--
2.16.1
next prev parent reply other threads:[~2018-02-12 17:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 17:08 [RFC PATCH 00/12] numa aware allocation for pacas, stacks, Nicholas Piggin
2018-02-12 17:08 ` Nicholas Piggin [this message]
2018-02-12 17:08 ` [RFC PATCH 02/12] powerpc/64: Use array of paca pointers and allocate pacas individually Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 03/12] powerpc/64s: allocate lppacas individually Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 04/12] powerpc/64s: allocate slb_shadow structures individually Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 05/12] mm: make memblock_alloc_base_nid non-static Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 06/12] powerpc/mm/numa: move numa topology discovery earlier Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 07/12] powerpc/64: move default SPR recording Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 08/12] powerpc/setup: cpu_to_phys_id array Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 09/12] powerpc/64: defer paca allocation until memory topology is discovered Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 10/12] powerpc/64: allocate pacas per node Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 11/12] powerpc/64: allocate per-cpu stacks node-local if possible Nicholas Piggin
2018-02-12 17:08 ` [RFC PATCH 12/12] powerpc/64s/radix: allocate kernel page tables " Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180212170822.14612-2-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).