* [RESEND PATCH] Input: joystick/analog - Use get_cycles() on PPC
@ 2018-03-14 11:17 Michael Ellerman
2018-03-14 16:39 ` Dmitry Torokhov
0 siblings, 1 reply; 3+ messages in thread
From: Michael Ellerman @ 2018-03-14 11:17 UTC (permalink / raw)
To: dmitry.torokhov; +Cc: linux-input, linux-kernel, linuxppc-dev
The analog joystick driver spits a warning at us:
drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
not defined for this architecture.
PPC has get_cycles() so use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
drivers/input/joystick/analog.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
This is the third resend, I'll take it via the powerpc tree if no one else
does.
cheers
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index c868a878c84f..a942c4ccd2af 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_PPC) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
--
2.14.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [RESEND PATCH] Input: joystick/analog - Use get_cycles() on PPC
2018-03-14 11:17 [RESEND PATCH] Input: joystick/analog - Use get_cycles() on PPC Michael Ellerman
@ 2018-03-14 16:39 ` Dmitry Torokhov
2018-03-16 14:00 ` Michael Ellerman
0 siblings, 1 reply; 3+ messages in thread
From: Dmitry Torokhov @ 2018-03-14 16:39 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linux-input, linux-kernel, linuxppc-dev
On Wed, Mar 14, 2018 at 10:17:52PM +1100, Michael Ellerman wrote:
> The analog joystick driver spits a warning at us:
>
> drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
> not defined for this architecture.
>
> PPC has get_cycles() so use that.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Applied, thank you.
> ---
> drivers/input/joystick/analog.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>
> This is the third resend, I'll take it via the powerpc tree if no one else
> does.
>
> cheers
>
> diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
> index c868a878c84f..a942c4ccd2af 100644
> --- a/drivers/input/joystick/analog.c
> +++ b/drivers/input/joystick/analog.c
> @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
> #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
> #define DELTA(x,y) ((y)-(x))
> #define TIME_NAME "TSC"
> -#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
> +#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_PPC) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
> #define GET_TIME(x) do { x = get_cycles(); } while (0)
> #define DELTA(x,y) ((y)-(x))
> #define TIME_NAME "get_cycles"
> --
> 2.14.1
>
--
Dmitry
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [RESEND PATCH] Input: joystick/analog - Use get_cycles() on PPC
2018-03-14 16:39 ` Dmitry Torokhov
@ 2018-03-16 14:00 ` Michael Ellerman
0 siblings, 0 replies; 3+ messages in thread
From: Michael Ellerman @ 2018-03-16 14:00 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, linux-kernel, linuxppc-dev
Dmitry Torokhov <dmitry.torokhov@gmail.com> writes:
> On Wed, Mar 14, 2018 at 10:17:52PM +1100, Michael Ellerman wrote:
>> The analog joystick driver spits a warning at us:
>>
>> drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
>> not defined for this architecture.
>>
>> PPC has get_cycles() so use that.
>>
>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
>
> Applied, thank you.
Thanks.
cheers
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-03-16 14:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-14 11:17 [RESEND PATCH] Input: joystick/analog - Use get_cycles() on PPC Michael Ellerman
2018-03-14 16:39 ` Dmitry Torokhov
2018-03-16 14:00 ` Michael Ellerman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).