linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Anton Blanchard <anton@samba.org>,
	"Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [RFC PATCH 3/3] powerpc/64s: always flush non-local CPUs from single threaded mms
Date: Thu, 29 Mar 2018 01:29:51 +1000	[thread overview]
Message-ID: <20180328152951.6422-4-npiggin@gmail.com> (raw)
In-Reply-To: <20180328152951.6422-1-npiggin@gmail.com>

Go one step further, if we're going to put a tlbie on the bus
at all, make it count. Always flush all others and restore our
mm to a local one.
---
 arch/powerpc/mm/tlb-radix.c | 45 +++++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
index f00acacf48f1..ba48539e799e 100644
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -424,10 +424,16 @@ void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr,
 		return;
 
 	preempt_disable();
-	if (!mm_is_thread_local(mm))
-		_tlbie_va(vmaddr, pid, psize, RIC_FLUSH_TLB);
-	else
+	if (mm_is_thread_local(mm)) {
 		_tlbiel_va(vmaddr, pid, psize, RIC_FLUSH_TLB);
+	} else {
+		if (mm_is_singlethreaded(mm)) {
+			_tlbie_pid(pid, RIC_FLUSH_ALL);
+			mm_reset_thread_local(mm);
+		} else {
+			_tlbie_va(vmaddr, pid, psize, RIC_FLUSH_TLB);
+		}
+	}
 	preempt_enable();
 }
 
@@ -496,14 +502,14 @@ void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				nr_pages > tlb_single_page_flush_ceiling);
 	}
 
-	if (full) {
+	if (!local && mm_is_singlethreaded(mm)) {
+		_tlbie_pid(pid, RIC_FLUSH_ALL);
+		mm_reset_thread_local(mm);
+	} else if (full) {
 		if (local) {
 			_tlbiel_pid(pid, RIC_FLUSH_TLB);
 		} else {
-			if (mm_is_singlethreaded(mm)) {
-				_tlbie_pid(pid, RIC_FLUSH_ALL);
-				mm_reset_thread_local(mm);
-			} else if (mm_needs_flush_escalation(mm)) {
+			if (mm_needs_flush_escalation(mm)) {
 				_tlbie_pid(pid, RIC_FLUSH_ALL);
 			} else {
 				_tlbie_pid(pid, RIC_FLUSH_TLB);
@@ -618,19 +624,17 @@ static inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
 				nr_pages > tlb_single_page_flush_ceiling);
 	}
 
-	if (full) {
+	if (!local && mm_is_singlethreaded(mm)) {
+		_tlbie_pid(pid, RIC_FLUSH_ALL);
+		mm_reset_thread_local(mm);
+	} else if (full) {
 		if (local) {
 			_tlbiel_pid(pid, also_pwc ? RIC_FLUSH_ALL : RIC_FLUSH_TLB);
 		} else {
-			if (mm_is_singlethreaded(mm)) {
-				_tlbie_pid(pid, RIC_FLUSH_ALL);
-				mm_reset_thread_local(mm);
-			} else {
-				if (mm_needs_flush_escalation(mm))
-					also_pwc = true;
+			if (mm_needs_flush_escalation(mm))
+				also_pwc = true;
 
-				_tlbie_pid(pid, also_pwc ? RIC_FLUSH_ALL : RIC_FLUSH_TLB);
-			}
+			_tlbie_pid(pid, also_pwc ? RIC_FLUSH_ALL : RIC_FLUSH_TLB);
 		}
 	} else {
 		if (local)
@@ -676,7 +680,12 @@ void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr)
 	if (mm_is_thread_local(mm)) {
 		_tlbiel_va_range(addr, end, pid, PAGE_SIZE, mmu_virtual_psize, true);
 	} else {
-		_tlbie_va_range(addr, end, pid, PAGE_SIZE, mmu_virtual_psize, true);
+		if (mm_is_singlethreaded(mm)) {
+			_tlbie_pid(pid, RIC_FLUSH_ALL);
+			mm_reset_thread_local(mm);
+		} else {
+			_tlbie_va_range(addr, end, pid, PAGE_SIZE, mmu_virtual_psize, true);
+		}
 	}
 
 	preempt_enable();
-- 
2.16.1

      parent reply	other threads:[~2018-03-28 15:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-28 15:29 [RFC PATCH 0/3] powerpc tlbie reductions again Nicholas Piggin
2018-03-28 15:29 ` [RFC PATCH 1/3] powerpc/64s: do not flush TLB when relaxing access Nicholas Piggin
2018-03-28 15:29 ` [RFC PATCH 2/3] powerpc/64s/radix: reset mm_cpumask for single thread process when possible Nicholas Piggin
2018-03-28 15:29 ` Nicholas Piggin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180328152951.6422-4-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=anton@samba.org \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).