From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
Balbir Singh <bsingharora@gmail.com>
Subject: [PATCH v2 2/2] powerpc/watchdog: provide more data in watchdog messages
Date: Sat, 5 May 2018 17:26:00 +1000 [thread overview]
Message-ID: <20180505072600.13270-3-npiggin@gmail.com> (raw)
In-Reply-To: <20180505072600.13270-1-npiggin@gmail.com>
Provide timebase and timebase of last heartbeat in watchdog lockup
messages. Also provide a stack trace of when a CPU becomes un-stuck,
which can be useful -- it could be where irqs are re-enabled, so it
may be the end of the critical section which is responsible for the
latency which is useful information.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/watchdog.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 0bc701f9ab35..a99951e8199e 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -111,7 +111,13 @@ static inline void wd_smp_unlock(unsigned long *flags)
static void wd_lockup_ipi(struct pt_regs *regs)
{
- pr_emerg("CPU %d Hard LOCKUP\n", raw_smp_processor_id());
+ int cpu = raw_smp_processor_id();
+ u64 tb = get_tb();
+
+ pr_emerg("CPU %d Hard LOCKUP\n", cpu);
+ pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n",
+ cpu, tb, per_cpu(wd_timer_tb, cpu),
+ tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000);
print_modules();
print_irqtrace_events(current);
if (regs)
@@ -154,6 +160,9 @@ static void watchdog_smp_panic(int cpu, u64 tb)
pr_emerg("CPU %d detected hard LOCKUP on other CPUs %*pbl\n",
cpu, cpumask_pr_args(&wd_smp_cpus_pending));
+ pr_emerg("CPU %d TB:%lld, last SMP heartbeat TB:%lld (%lldms ago)\n",
+ cpu, tb, wd_smp_last_reset_tb,
+ tb_to_ns(tb - wd_smp_last_reset_tb) / 1000000);
if (!sysctl_hardlockup_all_cpu_backtrace) {
/*
@@ -194,10 +203,19 @@ static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
{
if (!cpumask_test_cpu(cpu, &wd_smp_cpus_pending)) {
if (unlikely(cpumask_test_cpu(cpu, &wd_smp_cpus_stuck))) {
+ struct pt_regs *regs = get_irq_regs();
unsigned long flags;
- pr_emerg("CPU %d became unstuck\n", cpu);
wd_smp_lock(&flags);
+
+ pr_emerg("CPU %d became unstuck TB:%lld\n",
+ cpu, tb);
+ print_irqtrace_events(current);
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
+
cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
wd_smp_unlock(&flags);
}
@@ -252,7 +270,11 @@ void soft_nmi_interrupt(struct pt_regs *regs)
}
set_cpu_stuck(cpu, tb);
- pr_emerg("CPU %d self-detected hard LOCKUP @ %pS\n", cpu, (void *)regs->nip);
+ pr_emerg("CPU %d self-detected hard LOCKUP @ %pS\n",
+ cpu, (void *)regs->nip);
+ pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n",
+ cpu, tb, per_cpu(wd_timer_tb, cpu),
+ tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000);
print_modules();
print_irqtrace_events(current);
show_regs(regs);
--
2.17.0
prev parent reply other threads:[~2018-05-05 7:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-05 7:25 [PATCH v2 0/2] powerpc/watchdog: provide more data in watchdog messages Nicholas Piggin
2018-05-05 7:25 ` [PATCH v2 1/2] powerpc/watchdog: don't update the watchdog timestamp if a lockup is detected Nicholas Piggin
2018-05-10 14:06 ` [v2, " Michael Ellerman
2018-05-05 7:26 ` Nicholas Piggin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180505072600.13270-3-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=bsingharora@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).