[PATCH bpf v2 0/6] bpf: enhancements for multi-function programs

[PATCH bpf v2 0/6] bpf: enhancements for multi-function programs

[Sandipan Das]

This patch series introduces the following:

[1] Support for bpf-to-bpf function calls in the powerpc64 JIT compiler.

[2] Provide a way for resolving function calls because of the way JITed
    images are allocated in powerpc64.

[3] Fix to get JITed instruction dumps for multi-function programs from
    the bpf system call.

v2:
 - Incorporate review comments from Jakub

Sandipan Das (6):
  bpf: support 64-bit offsets for bpf function calls
  bpf: powerpc64: add JIT support for multi-function programs
  bpf: get kernel symbol addresses via syscall
  tools: bpf: sync bpf uapi header
  tools: bpftool: resolve calls without using imm field
  bpf: fix JITed dump for multi-function programs via syscall

 arch/powerpc/net/bpf_jit_comp64.c | 79 ++++++++++++++++++++++++++++++++++-----
 include/uapi/linux/bpf.h          |  2 +
 kernel/bpf/syscall.c              | 56 ++++++++++++++++++++++++---
 kernel/bpf/verifier.c             | 22 +++++++----
 tools/bpf/bpftool/prog.c          | 29 ++++++++++++++
 tools/bpf/bpftool/xlated_dumper.c | 10 ++++-
 tools/bpf/bpftool/xlated_dumper.h |  2 +
 tools/include/uapi/linux/bpf.h    |  2 +
 8 files changed, 179 insertions(+), 23 deletions(-)

-- 
2.14.3

[PATCH bpf v2 1/6] bpf: support 64-bit offsets for bpf function calls

[Sandipan Das]

The imm field of a bpf instruction is a signed 32-bit integer.
For JIT bpf-to-bpf function calls, it stores the offset of the
start address of the callee's JITed image from __bpf_call_base.

For some architectures, such as powerpc64, this offset may be
as large as 64 bits and cannot be accomodated in the imm field
without truncation.

We resolve this by:

[1] Additionally using the auxillary data of each function to
    keep a list of start addresses of the JITed images for all
    functions determined by the verifier.

[2] Retaining the subprog id inside the off field of the call
    instructions and using it to index into the list mentioned
    above and lookup the callee's address.

To make sure that the existing JIT compilers continue to work
without requiring changes, we keep the imm field as it is.

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
 kernel/bpf/verifier.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a9e4b1372da6..6c56cce9c4e3 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5383,11 +5383,24 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 			    insn->src_reg != BPF_PSEUDO_CALL)
 				continue;
 			subprog = insn->off;
-			insn->off = 0;
 			insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
 				func[subprog]->bpf_func -
 				__bpf_call_base;
 		}
+
+		/* we use the aux data to keep a list of the start addresses
+		 * of the JITed images for each function in the program
+		 *
+		 * for some architectures, such as powerpc64, the imm field
+		 * might not be large enough to hold the offset of the start
+		 * address of the callee's JITed image from __bpf_call_base
+		 *
+		 * in such cases, we can lookup the start address of a callee
+		 * by using its subprog id, available from the off field of
+		 * the call instruction, as an index for this list
+		 */
+		func[i]->aux->func = func;
+		func[i]->aux->func_cnt = env->subprog_cnt + 1;
 	}
 	for (i = 0; i < env->subprog_cnt; i++) {
 		old_bpf_func = func[i]->bpf_func;
-- 
2.14.3

Re: [PATCH bpf v2 1/6] bpf: support 64-bit offsets for bpf function calls

[Daniel Borkmann]

On 05/18/2018 02:50 PM, Sandipan Das wrote:
> The imm field of a bpf instruction is a signed 32-bit integer.
> For JIT bpf-to-bpf function calls, it stores the offset of the
> start address of the callee's JITed image from __bpf_call_base.
> 
> For some architectures, such as powerpc64, this offset may be
> as large as 64 bits and cannot be accomodated in the imm field
> without truncation.
> 
> We resolve this by:
> 
> [1] Additionally using the auxillary data of each function to
>     keep a list of start addresses of the JITed images for all
>     functions determined by the verifier.
> 
> [2] Retaining the subprog id inside the off field of the call
>     instructions and using it to index into the list mentioned
>     above and lookup the callee's address.
> 
> To make sure that the existing JIT compilers continue to work
> without requiring changes, we keep the imm field as it is.
> 
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
>  kernel/bpf/verifier.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
> index a9e4b1372da6..6c56cce9c4e3 100644
> --- a/kernel/bpf/verifier.c
> +++ b/kernel/bpf/verifier.c
> @@ -5383,11 +5383,24 @@ static int jit_subprogs(struct bpf_verifier_env *env)
>  			    insn->src_reg != BPF_PSEUDO_CALL)
>  				continue;
>  			subprog = insn->off;
> -			insn->off = 0;
>  			insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
>  				func[subprog]->bpf_func -
>  				__bpf_call_base;
>  		}
> +
> +		/* we use the aux data to keep a list of the start addresses
> +		 * of the JITed images for each function in the program
> +		 *
> +		 * for some architectures, such as powerpc64, the imm field
> +		 * might not be large enough to hold the offset of the start
> +		 * address of the callee's JITed image from __bpf_call_base
> +		 *
> +		 * in such cases, we can lookup the start address of a callee
> +		 * by using its subprog id, available from the off field of
> +		 * the call instruction, as an index for this list
> +		 */
> +		func[i]->aux->func = func;
> +		func[i]->aux->func_cnt = env->subprog_cnt + 1;

The target tree you have here is infact bpf, since in bpf-next there was a
cleanup where the + 1 is removed. Just for the record that we need to keep
this in mind for bpf into bpf-next merge since this would otherwise subtly
break.

>  	}
>  	for (i = 0; i < env->subprog_cnt; i++) {
>  		old_bpf_func = func[i]->bpf_func;
> 

Re: [PATCH bpf v2 1/6] bpf: support 64-bit offsets for bpf function calls

[Sandipan Das]

On 05/18/2018 08:45 PM, Daniel Borkmann wrote:
> On 05/18/2018 02:50 PM, Sandipan Das wrote:
>> The imm field of a bpf instruction is a signed 32-bit integer.
>> For JIT bpf-to-bpf function calls, it stores the offset of the
>> start address of the callee's JITed image from __bpf_call_base.
>>
>> For some architectures, such as powerpc64, this offset may be
>> as large as 64 bits and cannot be accomodated in the imm field
>> without truncation.
>>
>> We resolve this by:
>>
>> [1] Additionally using the auxillary data of each function to
>>     keep a list of start addresses of the JITed images for all
>>     functions determined by the verifier.
>>
>> [2] Retaining the subprog id inside the off field of the call
>>     instructions and using it to index into the list mentioned
>>     above and lookup the callee's address.
>>
>> To make sure that the existing JIT compilers continue to work
>> without requiring changes, we keep the imm field as it is.
>>
>> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
>> ---
>>  kernel/bpf/verifier.c | 15 ++++++++++++++-
>>  1 file changed, 14 insertions(+), 1 deletion(-)
>>
>> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
>> index a9e4b1372da6..6c56cce9c4e3 100644
>> --- a/kernel/bpf/verifier.c
>> +++ b/kernel/bpf/verifier.c
>> @@ -5383,11 +5383,24 @@ static int jit_subprogs(struct bpf_verifier_env *env)
>>  			    insn->src_reg != BPF_PSEUDO_CALL)
>>  				continue;
>>  			subprog = insn->off;
>> -			insn->off = 0;
>>  			insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
>>  				func[subprog]->bpf_func -
>>  				__bpf_call_base;
>>  		}
>> +
>> +		/* we use the aux data to keep a list of the start addresses
>> +		 * of the JITed images for each function in the program
>> +		 *
>> +		 * for some architectures, such as powerpc64, the imm field
>> +		 * might not be large enough to hold the offset of the start
>> +		 * address of the callee's JITed image from __bpf_call_base
>> +		 *
>> +		 * in such cases, we can lookup the start address of a callee
>> +		 * by using its subprog id, available from the off field of
>> +		 * the call instruction, as an index for this list
>> +		 */
>> +		func[i]->aux->func = func;
>> +		func[i]->aux->func_cnt = env->subprog_cnt + 1;
> 
> The target tree you have here is infact bpf, since in bpf-next there was a
> cleanup where the + 1 is removed. Just for the record that we need to keep
> this in mind for bpf into bpf-next merge since this would otherwise subtly
> break.
> 

Sorry about the wrong tag. This series is indeed based off bpf-next.

- Sandipan

>>  	}
>>  	for (i = 0; i < env->subprog_cnt; i++) {
>>  		old_bpf_func = func[i]->bpf_func;
>>
> 
> 

[PATCH bpf v2 2/6] bpf: powerpc64: add JIT support for multi-function programs

[Sandipan Das]

This adds support for bpf-to-bpf function calls in the powerpc64
JIT compiler. The JIT compiler converts the bpf call instructions
to native branch instructions. After a round of the usual passes,
the start addresses of the JITed images for the callee functions
are known. Finally, to fixup the branch target addresses, we need
to perform an extra pass.

Because of the address range in which JITed images are allocated
on powerpc64, the offsets of the start addresses of these images
from __bpf_call_base are as large as 64 bits. So, for a function
call, we cannot use the imm field of the instruction to determine
the callee's address. Instead, we use the alternative method of
getting it from the list of function addresses in the auxillary
data of the caller by using the off field as an index.

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
 arch/powerpc/net/bpf_jit_comp64.c | 79 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 69 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 1bdb1aff0619..25939892d8f7 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -256,7 +256,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 /* Assemble the body code between the prologue & epilogue */
 static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			      struct codegen_context *ctx,
-			      u32 *addrs)
+			      u32 *addrs, bool extra_pass)
 {
 	const struct bpf_insn *insn = fp->insnsi;
 	int flen = fp->len;
@@ -712,11 +712,23 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 			break;
 
 		/*
-		 * Call kernel helper
+		 * Call kernel helper or bpf function
 		 */
 		case BPF_JMP | BPF_CALL:
 			ctx->seen |= SEEN_FUNC;
-			func = (u8 *) __bpf_call_base + imm;
+
+			/* bpf function call */
+			if (insn[i].src_reg == BPF_PSEUDO_CALL && extra_pass)
+				if (fp->aux->func && off < fp->aux->func_cnt)
+					/* use the subprog id from the off
+					 * field to lookup the callee address
+					 */
+					func = (u8 *) fp->aux->func[off]->bpf_func;
+				else
+					return -EINVAL;
+			/* kernel helper call */
+			else
+				func = (u8 *) __bpf_call_base + imm;
 
 			bpf_jit_emit_func_call(image, ctx, (u64)func);
 
@@ -864,6 +876,14 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 	return 0;
 }
 
+struct powerpc64_jit_data {
+	struct bpf_binary_header *header;
+	u32 *addrs;
+	u8 *image;
+	u32 proglen;
+	struct codegen_context ctx;
+};
+
 struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 {
 	u32 proglen;
@@ -871,6 +891,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	u8 *image = NULL;
 	u32 *code_base;
 	u32 *addrs;
+	struct powerpc64_jit_data *jit_data;
 	struct codegen_context cgctx;
 	int pass;
 	int flen;
@@ -878,6 +899,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	struct bpf_prog *org_fp = fp;
 	struct bpf_prog *tmp_fp;
 	bool bpf_blinded = false;
+	bool extra_pass = false;
 
 	if (!fp->jit_requested)
 		return org_fp;
@@ -891,7 +913,28 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		fp = tmp_fp;
 	}
 
+	jit_data = fp->aux->jit_data;
+	if (!jit_data) {
+		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
+		if (!jit_data) {
+			fp = org_fp;
+			goto out;
+		}
+		fp->aux->jit_data = jit_data;
+	}
+
 	flen = fp->len;
+	addrs = jit_data->addrs;
+	if (addrs) {
+		cgctx = jit_data->ctx;
+		image = jit_data->image;
+		bpf_hdr = jit_data->header;
+		proglen = jit_data->proglen;
+		alloclen = proglen + FUNCTION_DESCR_SIZE;
+		extra_pass = true;
+		goto skip_init_ctx;
+	}
+
 	addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
 	if (addrs == NULL) {
 		fp = org_fp;
@@ -904,10 +947,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
 
 	/* Scouting faux-generate pass 0 */
-	if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
+	if (bpf_jit_build_body(fp, 0, &cgctx, addrs, false)) {
 		/* We hit something illegal or unsupported. */
 		fp = org_fp;
-		goto out;
+		goto out_addrs;
 	}
 
 	/*
@@ -925,9 +968,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 			bpf_jit_fill_ill_insns);
 	if (!bpf_hdr) {
 		fp = org_fp;
-		goto out;
+		goto out_addrs;
 	}
 
+skip_init_ctx:
 	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
 
 	/* Code generation passes 1-2 */
@@ -935,7 +979,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		/* Now build the prologue, body code & epilogue for real. */
 		cgctx.idx = 0;
 		bpf_jit_build_prologue(code_base, &cgctx);
-		bpf_jit_build_body(fp, code_base, &cgctx, addrs);
+		bpf_jit_build_body(fp, code_base, &cgctx, addrs, extra_pass);
 		bpf_jit_build_epilogue(code_base, &cgctx);
 
 		if (bpf_jit_enable > 1)
@@ -956,15 +1000,30 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	((u64 *)image)[1] = local_paca->kernel_toc;
 #endif
 
+	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
+
+	if (!fp->is_func || extra_pass) {
+		bpf_jit_binary_lock_ro(bpf_hdr);
+	} else {
+		jit_data->addrs = addrs;
+		jit_data->ctx = cgctx;
+		jit_data->proglen = proglen;
+		jit_data->image = image;
+		jit_data->header = bpf_hdr;
+	}
+
 	fp->bpf_func = (void *)image;
 	fp->jited = 1;
 	fp->jited_len = alloclen;
 
-	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
+	if (!fp->is_func || extra_pass) {
+out_addrs:
+		kfree(addrs);
+		kfree(jit_data);
+		fp->aux->jit_data = NULL;
+	}
 
 out:
-	kfree(addrs);
-
 	if (bpf_blinded)
 		bpf_jit_prog_release_other(fp, fp == org_fp ? tmp_fp : org_fp);
 
-- 
2.14.3

Re: [PATCH bpf v2 2/6] bpf: powerpc64: add JIT support for multi-function programs

[Daniel Borkmann]

On 05/18/2018 02:50 PM, Sandipan Das wrote:
> This adds support for bpf-to-bpf function calls in the powerpc64
> JIT compiler. The JIT compiler converts the bpf call instructions
> to native branch instructions. After a round of the usual passes,
> the start addresses of the JITed images for the callee functions
> are known. Finally, to fixup the branch target addresses, we need
> to perform an extra pass.
> 
> Because of the address range in which JITed images are allocated
> on powerpc64, the offsets of the start addresses of these images
> from __bpf_call_base are as large as 64 bits. So, for a function
> call, we cannot use the imm field of the instruction to determine
> the callee's address. Instead, we use the alternative method of
> getting it from the list of function addresses in the auxillary
> data of the caller by using the off field as an index.
> 
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
>  arch/powerpc/net/bpf_jit_comp64.c | 79 ++++++++++++++++++++++++++++++++++-----
>  1 file changed, 69 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
> index 1bdb1aff0619..25939892d8f7 100644
> --- a/arch/powerpc/net/bpf_jit_comp64.c
> +++ b/arch/powerpc/net/bpf_jit_comp64.c
> @@ -256,7 +256,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
>  /* Assemble the body code between the prologue & epilogue */
>  static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>  			      struct codegen_context *ctx,
> -			      u32 *addrs)
> +			      u32 *addrs, bool extra_pass)
>  {
>  	const struct bpf_insn *insn = fp->insnsi;
>  	int flen = fp->len;
> @@ -712,11 +712,23 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>  			break;
>  
>  		/*
> -		 * Call kernel helper
> +		 * Call kernel helper or bpf function
>  		 */
>  		case BPF_JMP | BPF_CALL:
>  			ctx->seen |= SEEN_FUNC;
> -			func = (u8 *) __bpf_call_base + imm;
> +
> +			/* bpf function call */
> +			if (insn[i].src_reg == BPF_PSEUDO_CALL && extra_pass)

Perhaps it might make sense here for !extra_pass to set func to some dummy
address as otherwise the 'kernel helper call' branch used for this is a bit
misleading in that sense. The PPC_LI64() used in bpf_jit_emit_func_call()
optimizes the immediate addr, I presume the JIT can handle situations where
in the final extra_pass the image needs to grow/shrink again (due to different
final address for the call)?

> +				if (fp->aux->func && off < fp->aux->func_cnt)
> +					/* use the subprog id from the off
> +					 * field to lookup the callee address
> +					 */
> +					func = (u8 *) fp->aux->func[off]->bpf_func;
> +				else
> +					return -EINVAL;
> +			/* kernel helper call */
> +			else
> +				func = (u8 *) __bpf_call_base + imm;
>  
>  			bpf_jit_emit_func_call(image, ctx, (u64)func);
>  
> @@ -864,6 +876,14 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>  	return 0;
>  }
>  
> +struct powerpc64_jit_data {
> +	struct bpf_binary_header *header;
> +	u32 *addrs;
> +	u8 *image;
> +	u32 proglen;
> +	struct codegen_context ctx;
> +};
> +
>  struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  {
>  	u32 proglen;
> @@ -871,6 +891,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  	u8 *image = NULL;
>  	u32 *code_base;
>  	u32 *addrs;
> +	struct powerpc64_jit_data *jit_data;
>  	struct codegen_context cgctx;
>  	int pass;
>  	int flen;
> @@ -878,6 +899,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  	struct bpf_prog *org_fp = fp;
>  	struct bpf_prog *tmp_fp;
>  	bool bpf_blinded = false;
> +	bool extra_pass = false;
>  
>  	if (!fp->jit_requested)
>  		return org_fp;
> @@ -891,7 +913,28 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  		fp = tmp_fp;
>  	}
>  
> +	jit_data = fp->aux->jit_data;
> +	if (!jit_data) {
> +		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
> +		if (!jit_data) {
> +			fp = org_fp;
> +			goto out;
> +		}
> +		fp->aux->jit_data = jit_data;
> +	}
> +
>  	flen = fp->len;
> +	addrs = jit_data->addrs;
> +	if (addrs) {
> +		cgctx = jit_data->ctx;
> +		image = jit_data->image;
> +		bpf_hdr = jit_data->header;
> +		proglen = jit_data->proglen;
> +		alloclen = proglen + FUNCTION_DESCR_SIZE;
> +		extra_pass = true;
> +		goto skip_init_ctx;
> +	}
> +
>  	addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
>  	if (addrs == NULL) {
>  		fp = org_fp;

In this case of !addrs, we leak the just allocated jit_data here!

> @@ -904,10 +947,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  	cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
>  
>  	/* Scouting faux-generate pass 0 */
> -	if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
> +	if (bpf_jit_build_body(fp, 0, &cgctx, addrs, false)) {
>  		/* We hit something illegal or unsupported. */
>  		fp = org_fp;
> -		goto out;
> +		goto out_addrs;
>  	}
>  
>  	/*
> @@ -925,9 +968,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  			bpf_jit_fill_ill_insns);
>  	if (!bpf_hdr) {
>  		fp = org_fp;
> -		goto out;
> +		goto out_addrs;
>  	}
>  
> +skip_init_ctx:
>  	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
>  
>  	/* Code generation passes 1-2 */
> @@ -935,7 +979,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  		/* Now build the prologue, body code & epilogue for real. */
>  		cgctx.idx = 0;
>  		bpf_jit_build_prologue(code_base, &cgctx);
> -		bpf_jit_build_body(fp, code_base, &cgctx, addrs);
> +		bpf_jit_build_body(fp, code_base, &cgctx, addrs, extra_pass);
>  		bpf_jit_build_epilogue(code_base, &cgctx);
>  
>  		if (bpf_jit_enable > 1)
> @@ -956,15 +1000,30 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>  	((u64 *)image)[1] = local_paca->kernel_toc;
>  #endif
>  
> +	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
> +
> +	if (!fp->is_func || extra_pass) {
> +		bpf_jit_binary_lock_ro(bpf_hdr);

powerpc doesn't implement set_memory_ro(). Generally this is not a problem since
set_memory_ro() defaults to 'return 0' in this case, but since the bpf_jit_free()
destructor is overridden here, there's no bpf_jit_binary_unlock_ro() and in case
powerpc would get set_memory_*() support one day this will then crash in random
places once the mem gets back to the allocator, thus hard to debug. Two options:
either you remove the bpf_jit_free() override or you remove the bpf_jit_binary_lock_ro().

> +	} else {
> +		jit_data->addrs = addrs;
> +		jit_data->ctx = cgctx;
> +		jit_data->proglen = proglen;
> +		jit_data->image = image;
> +		jit_data->header = bpf_hdr;
> +	}
> +
>  	fp->bpf_func = (void *)image;
>  	fp->jited = 1;
>  	fp->jited_len = alloclen;
>  
> -	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
> +	if (!fp->is_func || extra_pass) {
> +out_addrs:
> +		kfree(addrs);
> +		kfree(jit_data);
> +		fp->aux->jit_data = NULL;
> +	}
>  
>  out:
> -	kfree(addrs);
> -
>  	if (bpf_blinded)
>  		bpf_jit_prog_release_other(fp, fp == org_fp ? tmp_fp : org_fp);
>  
> 

Re: [PATCH bpf v2 2/6] bpf: powerpc64: add JIT support for multi-function programs

[Naveen N. Rao]

Daniel Borkmann wrote:
> On 05/18/2018 02:50 PM, Sandipan Das wrote:
>> This adds support for bpf-to-bpf function calls in the powerpc64
>> JIT compiler. The JIT compiler converts the bpf call instructions
>> to native branch instructions. After a round of the usual passes,
>> the start addresses of the JITed images for the callee functions
>> are known. Finally, to fixup the branch target addresses, we need
>> to perform an extra pass.
>>=20
>> Because of the address range in which JITed images are allocated
>> on powerpc64, the offsets of the start addresses of these images
>> from __bpf_call_base are as large as 64 bits. So, for a function
>> call, we cannot use the imm field of the instruction to determine
>> the callee's address. Instead, we use the alternative method of
>> getting it from the list of function addresses in the auxillary
>> data of the caller by using the off field as an index.
>>=20
>> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
>> ---
>>  arch/powerpc/net/bpf_jit_comp64.c | 79 ++++++++++++++++++++++++++++++++=
++-----
>>  1 file changed, 69 insertions(+), 10 deletions(-)
>>=20
>> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_ji=
t_comp64.c
>> index 1bdb1aff0619..25939892d8f7 100644
>> --- a/arch/powerpc/net/bpf_jit_comp64.c
>> +++ b/arch/powerpc/net/bpf_jit_comp64.c
>> @@ -256,7 +256,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struc=
t codegen_context *ctx, u32
>>  /* Assemble the body code between the prologue & epilogue */
>>  static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>>  			      struct codegen_context *ctx,
>> -			      u32 *addrs)
>> +			      u32 *addrs, bool extra_pass)
>>  {
>>  	const struct bpf_insn *insn =3D fp->insnsi;
>>  	int flen =3D fp->len;
>> @@ -712,11 +712,23 @@ static int bpf_jit_build_body(struct bpf_prog *fp,=
 u32 *image,
>>  			break;
>> =20
>>  		/*
>> -		 * Call kernel helper
>> +		 * Call kernel helper or bpf function
>>  		 */
>>  		case BPF_JMP | BPF_CALL:
>>  			ctx->seen |=3D SEEN_FUNC;
>> -			func =3D (u8 *) __bpf_call_base + imm;
>> +
>> +			/* bpf function call */
>> +			if (insn[i].src_reg =3D=3D BPF_PSEUDO_CALL && extra_pass)
>=20
> Perhaps it might make sense here for !extra_pass to set func to some dumm=
y
> address as otherwise the 'kernel helper call' branch used for this is a b=
it
> misleading in that sense. The PPC_LI64() used in bpf_jit_emit_func_call()
> optimizes the immediate addr, I presume the JIT can handle situations whe=
re
> in the final extra_pass the image needs to grow/shrink again (due to diff=
erent
> final address for the call)?

That's a good catch. We don't handle that -- we expect to get the size=20
right on first pass. We could probably have PPC_FUNC_ADDR() pad the=20
result with nops to make it a constant 5-instruction sequence.

>=20
>> +				if (fp->aux->func && off < fp->aux->func_cnt)
>> +					/* use the subprog id from the off
>> +					 * field to lookup the callee address
>> +					 */
>> +					func =3D (u8 *) fp->aux->func[off]->bpf_func;
>> +				else
>> +					return -EINVAL;
>> +			/* kernel helper call */
>> +			else
>> +				func =3D (u8 *) __bpf_call_base + imm;
>> =20
>>  			bpf_jit_emit_func_call(image, ctx, (u64)func);
>> =20
>> @@ -864,6 +876,14 @@ static int bpf_jit_build_body(struct bpf_prog *fp, =
u32 *image,
>>  	return 0;
>>  }
>> =20
>> +struct powerpc64_jit_data {
>> +	struct bpf_binary_header *header;
>> +	u32 *addrs;
>> +	u8 *image;
>> +	u32 proglen;
>> +	struct codegen_context ctx;
>> +};
>> +
>>  struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
>>  {
>>  	u32 proglen;
>> @@ -871,6 +891,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog=
 *fp)
>>  	u8 *image =3D NULL;
>>  	u32 *code_base;
>>  	u32 *addrs;
>> +	struct powerpc64_jit_data *jit_data;
>>  	struct codegen_context cgctx;
>>  	int pass;
>>  	int flen;
>> @@ -878,6 +899,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog=
 *fp)
>>  	struct bpf_prog *org_fp =3D fp;
>>  	struct bpf_prog *tmp_fp;
>>  	bool bpf_blinded =3D false;
>> +	bool extra_pass =3D false;
>> =20
>>  	if (!fp->jit_requested)
>>  		return org_fp;
>> @@ -891,7 +913,28 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_pro=
g *fp)
>>  		fp =3D tmp_fp;
>>  	}
>> =20
>> +	jit_data =3D fp->aux->jit_data;
>> +	if (!jit_data) {
>> +		jit_data =3D kzalloc(sizeof(*jit_data), GFP_KERNEL);
>> +		if (!jit_data) {
>> +			fp =3D org_fp;
>> +			goto out;
>> +		}
>> +		fp->aux->jit_data =3D jit_data;
>> +	}
>> +
>>  	flen =3D fp->len;
>> +	addrs =3D jit_data->addrs;
>> +	if (addrs) {
>> +		cgctx =3D jit_data->ctx;
>> +		image =3D jit_data->image;
>> +		bpf_hdr =3D jit_data->header;
>> +		proglen =3D jit_data->proglen;
>> +		alloclen =3D proglen + FUNCTION_DESCR_SIZE;
>> +		extra_pass =3D true;
>> +		goto skip_init_ctx;
>> +	}
>> +
>>  	addrs =3D kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
>>  	if (addrs =3D=3D NULL) {
>>  		fp =3D org_fp;
>=20
> In this case of !addrs, we leak the just allocated jit_data here!
>=20
>> @@ -904,10 +947,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_pr=
og *fp)
>>  	cgctx.stack_size =3D round_up(fp->aux->stack_depth, 16);
>> =20
>>  	/* Scouting faux-generate pass 0 */
>> -	if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
>> +	if (bpf_jit_build_body(fp, 0, &cgctx, addrs, false)) {
>>  		/* We hit something illegal or unsupported. */
>>  		fp =3D org_fp;
>> -		goto out;
>> +		goto out_addrs;
>>  	}
>> =20
>>  	/*
>> @@ -925,9 +968,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_pro=
g *fp)
>>  			bpf_jit_fill_ill_insns);
>>  	if (!bpf_hdr) {
>>  		fp =3D org_fp;
>> -		goto out;
>> +		goto out_addrs;
>>  	}
>> =20
>> +skip_init_ctx:
>>  	code_base =3D (u32 *)(image + FUNCTION_DESCR_SIZE);
>> =20
>>  	/* Code generation passes 1-2 */
>> @@ -935,7 +979,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog=
 *fp)
>>  		/* Now build the prologue, body code & epilogue for real. */
>>  		cgctx.idx =3D 0;
>>  		bpf_jit_build_prologue(code_base, &cgctx);
>> -		bpf_jit_build_body(fp, code_base, &cgctx, addrs);
>> +		bpf_jit_build_body(fp, code_base, &cgctx, addrs, extra_pass);
>>  		bpf_jit_build_epilogue(code_base, &cgctx);
>> =20
>>  		if (bpf_jit_enable > 1)
>> @@ -956,15 +1000,30 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_p=
rog *fp)
>>  	((u64 *)image)[1] =3D local_paca->kernel_toc;
>>  #endif
>> =20
>> +	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE)=
);
>> +
>> +	if (!fp->is_func || extra_pass) {
>> +		bpf_jit_binary_lock_ro(bpf_hdr);
>=20
> powerpc doesn't implement set_memory_ro(). Generally this is not a proble=
m since
> set_memory_ro() defaults to 'return 0' in this case, but since the bpf_ji=
t_free()
> destructor is overridden here, there's no bpf_jit_binary_unlock_ro() and =
in case
> powerpc would get set_memory_*() support one day this will then crash in =
random
> places once the mem gets back to the allocator, thus hard to debug. Two o=
ptions:
> either you remove the bpf_jit_free() override or you remove the bpf_jit_b=
inary_lock_ro().

Yeah, we shouldn't be using the lock here.

Thanks,
Naveen

=

Re: [PATCH bpf v2 2/6] bpf: powerpc64: add JIT support for multi-function programs

[Daniel Borkmann]

On 05/18/2018 06:05 PM, Naveen N. Rao wrote:
> Daniel Borkmann wrote:
>> On 05/18/2018 02:50 PM, Sandipan Das wrote:
>>> This adds support for bpf-to-bpf function calls in the powerpc64
>>> JIT compiler. The JIT compiler converts the bpf call instructions
>>> to native branch instructions. After a round of the usual passes,
>>> the start addresses of the JITed images for the callee functions
>>> are known. Finally, to fixup the branch target addresses, we need
>>> to perform an extra pass.
>>>
>>> Because of the address range in which JITed images are allocated
>>> on powerpc64, the offsets of the start addresses of these images
>>> from __bpf_call_base are as large as 64 bits. So, for a function
>>> call, we cannot use the imm field of the instruction to determine
>>> the callee's address. Instead, we use the alternative method of
>>> getting it from the list of function addresses in the auxillary
>>> data of the caller by using the off field as an index.
>>>
>>> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
>>> ---
>>>  arch/powerpc/net/bpf_jit_comp64.c | 79 ++++++++++++++++++++++++++++++++++-----
>>>  1 file changed, 69 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
>>> index 1bdb1aff0619..25939892d8f7 100644
>>> --- a/arch/powerpc/net/bpf_jit_comp64.c
>>> +++ b/arch/powerpc/net/bpf_jit_comp64.c
>>> @@ -256,7 +256,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
>>>  /* Assemble the body code between the prologue & epilogue */
>>>  static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>>>                    struct codegen_context *ctx,
>>> -                  u32 *addrs)
>>> +                  u32 *addrs, bool extra_pass)
>>>  {
>>>      const struct bpf_insn *insn = fp->insnsi;
>>>      int flen = fp->len;
>>> @@ -712,11 +712,23 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
>>>              break;
>>>  
>>>          /*
>>> -         * Call kernel helper
>>> +         * Call kernel helper or bpf function
>>>           */
>>>          case BPF_JMP | BPF_CALL:
>>>              ctx->seen |= SEEN_FUNC;
>>> -            func = (u8 *) __bpf_call_base + imm;
>>> +
>>> +            /* bpf function call */
>>> +            if (insn[i].src_reg == BPF_PSEUDO_CALL && extra_pass)
>>
>> Perhaps it might make sense here for !extra_pass to set func to some dummy
>> address as otherwise the 'kernel helper call' branch used for this is a bit
>> misleading in that sense. The PPC_LI64() used in bpf_jit_emit_func_call()
>> optimizes the immediate addr, I presume the JIT can handle situations where
>> in the final extra_pass the image needs to grow/shrink again (due to different
>> final address for the call)?
> 
> That's a good catch. We don't handle that -- we expect to get the size right on first pass. We could probably have PPC_FUNC_ADDR() pad the result with nops to make it a constant 5-instruction sequence.

Yeah, arm64 does something similar by not optimizing the imm in order to always
emit 4 insns for it.

Thanks,
Daniel

[PATCH bpf v2 3/6] bpf: get kernel symbol addresses via syscall

[Sandipan Das]

This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of kernel symbol addresses for all functions in a
given program and to userspace using the bpf system call
with the BPF_OBJ_GET_INFO_BY_FD command.

When bpf_jit_kallsyms is enabled, we can get the address
of the corresponding kernel symbol for a callee function
and resolve the symbol's name. The address is determined
by adding the value of the call instruction's imm field
to __bpf_call_base. This offset gets assigned to the imm
field by the verifier.

For some architectures, such as powerpc64, the imm field
is not large enough to hold this offset.

We resolve this by:

[1] Assigning the subprog id to the imm field of a call
    instruction in the verifier instead of the offset of
    the callee's symbol's address from __bpf_call_base.

[2] Determining the address of a callee's corresponding
    symbol by using the imm field as an index for the
    list of kernel symbol addresses now available from
    the program info.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
 include/uapi/linux/bpf.h |  2 ++
 kernel/bpf/syscall.c     | 20 ++++++++++++++++++++
 kernel/bpf/verifier.c    |  7 +------
 3 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index d94d333a8225..040c9cac7303 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2188,6 +2188,8 @@ struct bpf_prog_info {
 	__u32 xlated_prog_len;
 	__aligned_u64 jited_prog_insns;
 	__aligned_u64 xlated_prog_insns;
+	__aligned_u64 jited_ksyms;
+	__u32 nr_jited_ksyms;
 	__u64 load_time;	/* ns since boottime */
 	__u32 created_by_uid;
 	__u32 nr_map_ids;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index bfcde949c7f8..54a72fafe57c 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1933,6 +1933,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 	if (!capable(CAP_SYS_ADMIN)) {
 		info.jited_prog_len = 0;
 		info.xlated_prog_len = 0;
+		info.nr_jited_ksyms = 0;
 		goto done;
 	}
 
@@ -1981,6 +1982,25 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 		}
 	}
 
+	ulen = info.nr_jited_ksyms;
+	info.nr_jited_ksyms = prog->aux->func_cnt;
+	if (info.nr_jited_ksyms && ulen) {
+		u64 __user *user_jited_ksyms = u64_to_user_ptr(info.jited_ksyms);
+		ulong ksym_addr;
+		u32 i;
+
+		/* copy the address of the kernel symbol corresponding to
+		 * each function
+		 */
+		ulen = min_t(u32, info.nr_jited_ksyms, ulen);
+		for (i = 0; i < ulen; i++) {
+			ksym_addr = (ulong) prog->aux->func[i]->bpf_func;
+			ksym_addr &= PAGE_MASK;
+			if (put_user((u64) ksym_addr, &user_jited_ksyms[i]))
+				return -EFAULT;
+		}
+	}
+
 done:
 	if (copy_to_user(uinfo, &info, info_len) ||
 	    put_user(info_len, &uattr->info.info_len))
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 6c56cce9c4e3..e826c396aba2 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5426,17 +5426,12 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 	 * later look the same as if they were interpreted only.
 	 */
 	for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
-		unsigned long addr;
-
 		if (insn->code != (BPF_JMP | BPF_CALL) ||
 		    insn->src_reg != BPF_PSEUDO_CALL)
 			continue;
 		insn->off = env->insn_aux_data[i].call_imm;
 		subprog = find_subprog(env, i + insn->off + 1);
-		addr  = (unsigned long)func[subprog]->bpf_func;
-		addr &= PAGE_MASK;
-		insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
-			    addr - __bpf_call_base;
+		insn->imm = subprog;
 	}
 
 	prog->jited = 1;
-- 
2.14.3

Re: [PATCH bpf v2 3/6] bpf: get kernel symbol addresses via syscall

[Daniel Borkmann]

On 05/18/2018 02:50 PM, Sandipan Das wrote:
> This adds new two new fields to struct bpf_prog_info. For
> multi-function programs, these fields can be used to pass
> a list of kernel symbol addresses for all functions in a
> given program and to userspace using the bpf system call
> with the BPF_OBJ_GET_INFO_BY_FD command.
> 
> When bpf_jit_kallsyms is enabled, we can get the address
> of the corresponding kernel symbol for a callee function
> and resolve the symbol's name. The address is determined
> by adding the value of the call instruction's imm field
> to __bpf_call_base. This offset gets assigned to the imm
> field by the verifier.
> 
> For some architectures, such as powerpc64, the imm field
> is not large enough to hold this offset.
> 
> We resolve this by:
> 
> [1] Assigning the subprog id to the imm field of a call
>     instruction in the verifier instead of the offset of
>     the callee's symbol's address from __bpf_call_base.
> 
> [2] Determining the address of a callee's corresponding
>     symbol by using the imm field as an index for the
>     list of kernel symbol addresses now available from
>     the program info.
> 
> Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
>  include/uapi/linux/bpf.h |  2 ++
>  kernel/bpf/syscall.c     | 20 ++++++++++++++++++++
>  kernel/bpf/verifier.c    |  7 +------
>  3 files changed, 23 insertions(+), 6 deletions(-)
> 
> diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> index d94d333a8225..040c9cac7303 100644
> --- a/include/uapi/linux/bpf.h
> +++ b/include/uapi/linux/bpf.h
> @@ -2188,6 +2188,8 @@ struct bpf_prog_info {
>  	__u32 xlated_prog_len;
>  	__aligned_u64 jited_prog_insns;
>  	__aligned_u64 xlated_prog_insns;
> +	__aligned_u64 jited_ksyms;
> +	__u32 nr_jited_ksyms;
>  	__u64 load_time;	/* ns since boottime */
>  	__u32 created_by_uid;
>  	__u32 nr_map_ids;
> diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
> index bfcde949c7f8..54a72fafe57c 100644
> --- a/kernel/bpf/syscall.c
> +++ b/kernel/bpf/syscall.c
> @@ -1933,6 +1933,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  	if (!capable(CAP_SYS_ADMIN)) {
>  		info.jited_prog_len = 0;
>  		info.xlated_prog_len = 0;
> +		info.nr_jited_ksyms = 0;
>  		goto done;
>  	}
>  
> @@ -1981,6 +1982,25 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  		}
>  	}
>  
> +	ulen = info.nr_jited_ksyms;
> +	info.nr_jited_ksyms = prog->aux->func_cnt;
> +	if (info.nr_jited_ksyms && ulen) {

Since this exposes addresses (though masked one which is correct), this
definitely needs to be guarded with bpf_dump_raw_ok() like we do in other
places here (see JIT dump for example).

> +		u64 __user *user_jited_ksyms = u64_to_user_ptr(info.jited_ksyms);
> +		ulong ksym_addr;
> +		u32 i;
> +
> +		/* copy the address of the kernel symbol corresponding to
> +		 * each function
> +		 */
> +		ulen = min_t(u32, info.nr_jited_ksyms, ulen);
> +		for (i = 0; i < ulen; i++) {
> +			ksym_addr = (ulong) prog->aux->func[i]->bpf_func;
> +			ksym_addr &= PAGE_MASK;
> +			if (put_user((u64) ksym_addr, &user_jited_ksyms[i]))
> +				return -EFAULT;
> +		}
> +	}
> +
>  done:
>  	if (copy_to_user(uinfo, &info, info_len) ||
>  	    put_user(info_len, &uattr->info.info_len))
> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
> index 6c56cce9c4e3..e826c396aba2 100644
> --- a/kernel/bpf/verifier.c
> +++ b/kernel/bpf/verifier.c
> @@ -5426,17 +5426,12 @@ static int jit_subprogs(struct bpf_verifier_env *env)
>  	 * later look the same as if they were interpreted only.
>  	 */
>  	for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
> -		unsigned long addr;
> -
>  		if (insn->code != (BPF_JMP | BPF_CALL) ||
>  		    insn->src_reg != BPF_PSEUDO_CALL)
>  			continue;
>  		insn->off = env->insn_aux_data[i].call_imm;
>  		subprog = find_subprog(env, i + insn->off + 1);
> -		addr  = (unsigned long)func[subprog]->bpf_func;

Hmm, in current bpf tree this says 'subprog + 1' here, so this is not
rebased against bpf tree but bpf-next (unlike what subject says)?

https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/tree/kernel/bpf/verifier.c#n5351

> -		addr &= PAGE_MASK;
> -		insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
> -			    addr - __bpf_call_base;
> +		insn->imm = subprog;
>  	}
>  
>  	prog->jited = 1;
> 

[PATCH bpf v2 4/6] tools: bpf: sync bpf uapi header

[Sandipan Das]

Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
addresses of the kernel symbols corresponding to each
function in a JITed program.

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
 tools/include/uapi/linux/bpf.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index d94d333a8225..040c9cac7303 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -2188,6 +2188,8 @@ struct bpf_prog_info {
 	__u32 xlated_prog_len;
 	__aligned_u64 jited_prog_insns;
 	__aligned_u64 xlated_prog_insns;
+	__aligned_u64 jited_ksyms;
+	__u32 nr_jited_ksyms;
 	__u64 load_time;	/* ns since boottime */
 	__u32 created_by_uid;
 	__u32 nr_map_ids;
-- 
2.14.3

[PATCH bpf v2 5/6] tools: bpftool: resolve calls without using imm field

[Sandipan Das]

Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.

For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
v2:
 - Order variables from longest to shortest
 - Make sure that ksyms_ptr and ksyms_len are always initialized
 - Simplify code
---
 tools/bpf/bpftool/prog.c          | 29 +++++++++++++++++++++++++++++
 tools/bpf/bpftool/xlated_dumper.c | 10 +++++++++-
 tools/bpf/bpftool/xlated_dumper.h |  2 ++
 3 files changed, 40 insertions(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 9bdfdf2d3fbe..e2f8f8f259fc 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -421,19 +421,26 @@ static int do_show(int argc, char **argv)
 static int do_dump(int argc, char **argv)
 {
 	struct bpf_prog_info info = {};
+	unsigned long *addrs = NULL;
 	struct dump_data dd = {};
 	__u32 len = sizeof(info);
 	unsigned int buf_size;
+	unsigned int nr_addrs;
 	char *filepath = NULL;
 	bool opcodes = false;
 	bool visual = false;
 	unsigned char *buf;
 	__u32 *member_len;
 	__u64 *member_ptr;
+	__u32 *ksyms_len;
+	__u64 *ksyms_ptr;
 	ssize_t n;
 	int err;
 	int fd;
 
+	ksyms_len = &info.nr_jited_ksyms;
+	ksyms_ptr = &info.jited_ksyms;
+
 	if (is_prefix(*argv, "jited")) {
 		member_len = &info.jited_prog_len;
 		member_ptr = &info.jited_prog_insns;
@@ -496,10 +503,22 @@ static int do_dump(int argc, char **argv)
 		return -1;
 	}
 
+	nr_addrs = *ksyms_len;
+	if (nr_addrs) {
+		addrs = malloc(nr_addrs * sizeof(__u64));
+		if (!addrs) {
+			p_err("mem alloc failed");
+			close(fd);
+			goto err_free;
+		}
+	}
+
 	memset(&info, 0, sizeof(info));
 
 	*member_ptr = ptr_to_u64(buf);
 	*member_len = buf_size;
+	*ksyms_ptr = ptr_to_u64(addrs);
+	*ksyms_len = nr_addrs;
 
 	err = bpf_obj_get_info_by_fd(fd, &info, &len);
 	close(fd);
@@ -513,6 +532,11 @@ static int do_dump(int argc, char **argv)
 		goto err_free;
 	}
 
+	if (*ksyms_len > nr_addrs) {
+		p_err("too many addresses returned");
+		goto err_free;
+	}
+
 	if ((member_len == &info.jited_prog_len &&
 	     info.jited_prog_insns == 0) ||
 	    (member_len == &info.xlated_prog_len &&
@@ -558,6 +582,9 @@ static int do_dump(int argc, char **argv)
 			dump_xlated_cfg(buf, *member_len);
 	} else {
 		kernel_syms_load(&dd);
+		dd.nr_jited_ksyms = *ksyms_len;
+		dd.jited_ksyms = (__u64 *) *ksyms_ptr;
+
 		if (json_output)
 			dump_xlated_json(&dd, buf, *member_len, opcodes);
 		else
@@ -566,10 +593,12 @@ static int do_dump(int argc, char **argv)
 	}
 
 	free(buf);
+	free(addrs);
 	return 0;
 
 err_free:
 	free(buf);
+	free(addrs);
 	return -1;
 }
 
diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c
index 7a3173b76c16..fb065b55db6d 100644
--- a/tools/bpf/bpftool/xlated_dumper.c
+++ b/tools/bpf/bpftool/xlated_dumper.c
@@ -174,7 +174,11 @@ static const char *print_call_pcrel(struct dump_data *dd,
 				    unsigned long address,
 				    const struct bpf_insn *insn)
 {
-	if (sym)
+	if (!dd->nr_jited_ksyms)
+		/* Do not show address for interpreted programs */
+		snprintf(dd->scratch_buff, sizeof(dd->scratch_buff),
+			"%+d", insn->off);
+	else if (sym)
 		snprintf(dd->scratch_buff, sizeof(dd->scratch_buff),
 			 "%+d#%s", insn->off, sym->name);
 	else
@@ -203,6 +207,10 @@ static const char *print_call(void *private_data,
 	unsigned long address = dd->address_call_base + insn->imm;
 	struct kernel_sym *sym;
 
+	if (insn->src_reg == BPF_PSEUDO_CALL &&
+		(__u32) insn->imm < dd->nr_jited_ksyms)
+		address = dd->jited_ksyms[insn->imm];
+
 	sym = kernel_syms_search(dd, address);
 	if (insn->src_reg == BPF_PSEUDO_CALL)
 		return print_call_pcrel(dd, sym, address, insn);
diff --git a/tools/bpf/bpftool/xlated_dumper.h b/tools/bpf/bpftool/xlated_dumper.h
index b34affa7ef2d..eafbb49c8d0b 100644
--- a/tools/bpf/bpftool/xlated_dumper.h
+++ b/tools/bpf/bpftool/xlated_dumper.h
@@ -49,6 +49,8 @@ struct dump_data {
 	unsigned long address_call_base;
 	struct kernel_sym *sym_mapping;
 	__u32 sym_count;
+	__u64 *jited_ksyms;
+	__u32 nr_jited_ksyms;
 	char scratch_buff[SYM_MAX_NAME + 8];
 };
 
-- 
2.14.3

Re: [PATCH bpf v2 5/6] tools: bpftool: resolve calls without using imm field

[Jakub Kicinski]

On Fri, 18 May 2018 18:20:38 +0530, Sandipan Das wrote:
> Currently, we resolve the callee's address for a JITed function
> call by using the imm field of the call instruction as an offset
> from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
> use this address to get the callee's kernel symbol's name.
> 
> For some architectures, such as powerpc64, the imm field is not
> large enough to hold this offset. So, instead of assigning this
> offset to the imm field, the verifier now assigns the subprog
> id. Also, a list of kernel symbol addresses for all the JITed
> functions is provided in the program info. We now use the imm
> field as an index for this list to lookup a callee's symbol's
> address and resolve its name.
> 
> Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
> v2:
>  - Order variables from longest to shortest
>  - Make sure that ksyms_ptr and ksyms_len are always initialized
>  - Simplify code

Thanks for the improvements!  Since there will be v3 two minor nit
picks still :)

>  tools/bpf/bpftool/prog.c          | 29 +++++++++++++++++++++++++++++
>  tools/bpf/bpftool/xlated_dumper.c | 10 +++++++++-
>  tools/bpf/bpftool/xlated_dumper.h |  2 ++
>  3 files changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
> index 9bdfdf2d3fbe..e2f8f8f259fc 100644
> --- a/tools/bpf/bpftool/prog.c
> +++ b/tools/bpf/bpftool/prog.c
> @@ -421,19 +421,26 @@ static int do_show(int argc, char **argv)
>  static int do_dump(int argc, char **argv)
>  {
>  	struct bpf_prog_info info = {};
> +	unsigned long *addrs = NULL;
>  	struct dump_data dd = {};
>  	__u32 len = sizeof(info);
>  	unsigned int buf_size;
> +	unsigned int nr_addrs;
>  	char *filepath = NULL;
>  	bool opcodes = false;
>  	bool visual = false;
>  	unsigned char *buf;
>  	__u32 *member_len;
>  	__u64 *member_ptr;
> +	__u32 *ksyms_len;
> +	__u64 *ksyms_ptr;
>  	ssize_t n;
>  	int err;
>  	int fd;
>  
> +	ksyms_len = &info.nr_jited_ksyms;
> +	ksyms_ptr = &info.jited_ksyms;

I'm not sure why you need these, why not just access
info.nr_jited_ksyms and info.jited_ksyms directly?  "member" variables
are there because jited and xlated images get returned in different
member of struct bpf_prog_info.

>  	if (is_prefix(*argv, "jited")) {
>  		member_len = &info.jited_prog_len;
>  		member_ptr = &info.jited_prog_insns;
> @@ -496,10 +503,22 @@ static int do_dump(int argc, char **argv)
>  		return -1;
>  	}
>  
> +	nr_addrs = *ksyms_len;
> +	if (nr_addrs) {
> +		addrs = malloc(nr_addrs * sizeof(__u64));
> +		if (!addrs) {
> +			p_err("mem alloc failed");
> +			close(fd);
> +			goto err_free;
> +		}
> +	}
> +
>  	memset(&info, 0, sizeof(info));
>  
>  	*member_ptr = ptr_to_u64(buf);
>  	*member_len = buf_size;
> +	*ksyms_ptr = ptr_to_u64(addrs);
> +	*ksyms_len = nr_addrs;
>  
>  	err = bpf_obj_get_info_by_fd(fd, &info, &len);
>  	close(fd);
> @@ -513,6 +532,11 @@ static int do_dump(int argc, char **argv)
>  		goto err_free;
>  	}
>  
> +	if (*ksyms_len > nr_addrs) {
> +		p_err("too many addresses returned");
> +		goto err_free;
> +	}
> +
>  	if ((member_len == &info.jited_prog_len &&
>  	     info.jited_prog_insns == 0) ||
>  	    (member_len == &info.xlated_prog_len &&
> @@ -558,6 +582,9 @@ static int do_dump(int argc, char **argv)
>  			dump_xlated_cfg(buf, *member_len);
>  	} else {
>  		kernel_syms_load(&dd);
> +		dd.nr_jited_ksyms = *ksyms_len;
> +		dd.jited_ksyms = (__u64 *) *ksyms_ptr;
> +
>  		if (json_output)
>  			dump_xlated_json(&dd, buf, *member_len, opcodes);
>  		else

> diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c
> index 7a3173b76c16..fb065b55db6d 100644
> --- a/tools/bpf/bpftool/xlated_dumper.c
> +++ b/tools/bpf/bpftool/xlated_dumper.c
> @@ -203,6 +207,10 @@ static const char *print_call(void *private_data,
>  	unsigned long address = dd->address_call_base + insn->imm;
>  	struct kernel_sym *sym;
>  
> +	if (insn->src_reg == BPF_PSEUDO_CALL &&
> +		(__u32) insn->imm < dd->nr_jited_ksyms)

Indentation seems off.

> +		address = dd->jited_ksyms[insn->imm];
> +
>  	sym = kernel_syms_search(dd, address);
>  	if (insn->src_reg == BPF_PSEUDO_CALL)
>  		return print_call_pcrel(dd, sym, address, insn);

[PATCH bpf v2 6/6] bpf: fix JITed dump for multi-function programs via syscall

[Sandipan Das]

Currently, for multi-function programs, we cannot get the JITed
instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
command. Because of this, userspace tools such as bpftool fail
to identify a multi-function program as being JITed or not.

With the JIT enabled and the test program running, this can be
verified as follows:

  # cat /proc/sys/net/core/bpf_jit_enable
  1

Before applying this patch:

  # bpftool prog list
  1: kprobe  name foo  tag b811aab41a39ad3d  gpl
          loaded_at 2018-05-16T11:43:38+0530  uid 0
          xlated 216B  not jited  memlock 65536B
  ...

  # bpftool prog dump jited id 1
  no instructions returned

After applying this patch:

  # bpftool prog list
  1: kprobe  name foo  tag b811aab41a39ad3d  gpl
          loaded_at 2018-05-16T12:13:01+0530  uid 0
          xlated 216B  jited 308B  memlock 65536B
  ...

  # bpftool prog dump jited id 1
     0:   nop
     4:   nop
     8:   mflr    r0
     c:   std     r0,16(r1)
    10:   stdu    r1,-112(r1)
    14:   std     r31,104(r1)
    18:   addi    r31,r1,48
    1c:   li      r3,10
  ...

Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
---
 kernel/bpf/syscall.c | 38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 54a72fafe57c..2430d159078c 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1896,7 +1896,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 	struct bpf_prog_info info = {};
 	u32 info_len = attr->info.info_len;
 	char __user *uinsns;
-	u32 ulen;
+	u32 ulen, i;
 	int err;
 
 	err = check_uarg_tail_zero(uinfo, sizeof(info), info_len);
@@ -1922,7 +1922,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 	ulen = min_t(u32, info.nr_map_ids, ulen);
 	if (ulen) {
 		u32 __user *user_map_ids = u64_to_user_ptr(info.map_ids);
-		u32 i;
 
 		for (i = 0; i < ulen; i++)
 			if (put_user(prog->aux->used_maps[i]->id,
@@ -1970,13 +1969,41 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 	 * for offload.
 	 */
 	ulen = info.jited_prog_len;
-	info.jited_prog_len = prog->jited_len;
+	if (prog->aux->func_cnt) {
+		info.jited_prog_len = 0;
+		for (i = 0; i < prog->aux->func_cnt; i++)
+			info.jited_prog_len += prog->aux->func[i]->jited_len;
+	} else {
+		info.jited_prog_len = prog->jited_len;
+	}
+
 	if (info.jited_prog_len && ulen) {
 		if (bpf_dump_raw_ok()) {
 			uinsns = u64_to_user_ptr(info.jited_prog_insns);
 			ulen = min_t(u32, info.jited_prog_len, ulen);
-			if (copy_to_user(uinsns, prog->bpf_func, ulen))
-				return -EFAULT;
+
+			/* for multi-function programs, copy the JITed
+			 * instructions for all the functions
+			 */
+			if (prog->aux->func_cnt) {
+				u32 len, free;
+				u8 *img;
+
+				free = ulen;
+				for (i = 0; i < prog->aux->func_cnt; i++) {
+					len = prog->aux->func[i]->jited_len;
+					img = (u8 *) prog->aux->func[i]->bpf_func;
+					if (len > free)
+						break;
+					if (copy_to_user(uinsns, img, len))
+						return -EFAULT;
+					uinsns += len;
+					free -= len;
+				}
+			} else {
+				if (copy_to_user(uinsns, prog->bpf_func, ulen))
+					return -EFAULT;
+			}
 		} else {
 			info.jited_prog_insns = 0;
 		}
@@ -1987,7 +2014,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
 	if (info.nr_jited_ksyms && ulen) {
 		u64 __user *user_jited_ksyms = u64_to_user_ptr(info.jited_ksyms);
 		ulong ksym_addr;
-		u32 i;
 
 		/* copy the address of the kernel symbol corresponding to
 		 * each function
-- 
2.14.3

Re: [PATCH bpf v2 6/6] bpf: fix JITed dump for multi-function programs via syscall

[Daniel Borkmann]

On 05/18/2018 02:50 PM, Sandipan Das wrote:
> Currently, for multi-function programs, we cannot get the JITed
> instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
> command. Because of this, userspace tools such as bpftool fail
> to identify a multi-function program as being JITed or not.
> 
> With the JIT enabled and the test program running, this can be
> verified as follows:
> 
>   # cat /proc/sys/net/core/bpf_jit_enable
>   1
> 
> Before applying this patch:
> 
>   # bpftool prog list
>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>           loaded_at 2018-05-16T11:43:38+0530  uid 0
>           xlated 216B  not jited  memlock 65536B
>   ...
> 
>   # bpftool prog dump jited id 1
>   no instructions returned
> 
> After applying this patch:
> 
>   # bpftool prog list
>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>           loaded_at 2018-05-16T12:13:01+0530  uid 0
>           xlated 216B  jited 308B  memlock 65536B
>   ...

That's really nice! One comment inline below:

>   # bpftool prog dump jited id 1
>      0:   nop
>      4:   nop
>      8:   mflr    r0
>      c:   std     r0,16(r1)
>     10:   stdu    r1,-112(r1)
>     14:   std     r31,104(r1)
>     18:   addi    r31,r1,48
>     1c:   li      r3,10
>   ...
> 
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
>  kernel/bpf/syscall.c | 38 ++++++++++++++++++++++++++++++++------
>  1 file changed, 32 insertions(+), 6 deletions(-)
> 
> diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
> index 54a72fafe57c..2430d159078c 100644
> --- a/kernel/bpf/syscall.c
> +++ b/kernel/bpf/syscall.c
> @@ -1896,7 +1896,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  	struct bpf_prog_info info = {};
>  	u32 info_len = attr->info.info_len;
>  	char __user *uinsns;
> -	u32 ulen;
> +	u32 ulen, i;
>  	int err;
>  
>  	err = check_uarg_tail_zero(uinfo, sizeof(info), info_len);
> @@ -1922,7 +1922,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  	ulen = min_t(u32, info.nr_map_ids, ulen);
>  	if (ulen) {
>  		u32 __user *user_map_ids = u64_to_user_ptr(info.map_ids);
> -		u32 i;
>  
>  		for (i = 0; i < ulen; i++)
>  			if (put_user(prog->aux->used_maps[i]->id,
> @@ -1970,13 +1969,41 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  	 * for offload.
>  	 */
>  	ulen = info.jited_prog_len;
> -	info.jited_prog_len = prog->jited_len;
> +	if (prog->aux->func_cnt) {
> +		info.jited_prog_len = 0;
> +		for (i = 0; i < prog->aux->func_cnt; i++)
> +			info.jited_prog_len += prog->aux->func[i]->jited_len;
> +	} else {
> +		info.jited_prog_len = prog->jited_len;
> +	}
> +
>  	if (info.jited_prog_len && ulen) {
>  		if (bpf_dump_raw_ok()) {
>  			uinsns = u64_to_user_ptr(info.jited_prog_insns);
>  			ulen = min_t(u32, info.jited_prog_len, ulen);
> -			if (copy_to_user(uinsns, prog->bpf_func, ulen))
> -				return -EFAULT;
> +
> +			/* for multi-function programs, copy the JITed
> +			 * instructions for all the functions
> +			 */
> +			if (prog->aux->func_cnt) {
> +				u32 len, free;
> +				u8 *img;
> +
> +				free = ulen;
> +				for (i = 0; i < prog->aux->func_cnt; i++) {
> +					len = prog->aux->func[i]->jited_len;
> +					img = (u8 *) prog->aux->func[i]->bpf_func;
> +					if (len > free)
> +						break;
> +					if (copy_to_user(uinsns, img, len))
> +						return -EFAULT;
> +					uinsns += len;
> +					free -= len;

Is there any way we can introduce a delimiter between the different
images such that they could be more easily correlated with the call
from the main (or other sub-)program instead of having one contiguous
dump blob?

> +				}
> +			} else {
> +				if (copy_to_user(uinsns, prog->bpf_func, ulen))
> +					return -EFAULT;
> +			}
>  		} else {
>  			info.jited_prog_insns = 0;
>  		}
> @@ -1987,7 +2014,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>  	if (info.nr_jited_ksyms && ulen) {
>  		u64 __user *user_jited_ksyms = u64_to_user_ptr(info.jited_ksyms);
>  		ulong ksym_addr;
> -		u32 i;
>  
>  		/* copy the address of the kernel symbol corresponding to
>  		 * each function
> 

Re: [PATCH bpf v2 6/6] bpf: fix JITed dump for multi-function programs via syscall

[Sandipan Das]

Hi Daniel,

On 05/18/2018 09:21 PM, Daniel Borkmann wrote:
> On 05/18/2018 02:50 PM, Sandipan Das wrote:
>> Currently, for multi-function programs, we cannot get the JITed
>> instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
>> command. Because of this, userspace tools such as bpftool fail
>> to identify a multi-function program as being JITed or not.
>>
>> With the JIT enabled and the test program running, this can be
>> verified as follows:
>>
>>   # cat /proc/sys/net/core/bpf_jit_enable
>>   1
>>
>> Before applying this patch:
>>
>>   # bpftool prog list
>>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>>           loaded_at 2018-05-16T11:43:38+0530  uid 0
>>           xlated 216B  not jited  memlock 65536B
>>   ...
>>
>>   # bpftool prog dump jited id 1
>>   no instructions returned
>>
>> After applying this patch:
>>
>>   # bpftool prog list
>>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>>           loaded_at 2018-05-16T12:13:01+0530  uid 0
>>           xlated 216B  jited 308B  memlock 65536B
>>   ...
> 
> That's really nice! One comment inline below:
> 
>>   # bpftool prog dump jited id 1
>>      0:   nop
>>      4:   nop
>>      8:   mflr    r0
>>      c:   std     r0,16(r1)
>>     10:   stdu    r1,-112(r1)
>>     14:   std     r31,104(r1)
>>     18:   addi    r31,r1,48
>>     1c:   li      r3,10
>>   ...
>>
>> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
>> ---
>>  kernel/bpf/syscall.c | 38 ++++++++++++++++++++++++++++++++------
>>  1 file changed, 32 insertions(+), 6 deletions(-)
>>
>> diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
>> index 54a72fafe57c..2430d159078c 100644
>> --- a/kernel/bpf/syscall.c
>> +++ b/kernel/bpf/syscall.c
>> @@ -1896,7 +1896,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>  	struct bpf_prog_info info = {};
>>  	u32 info_len = attr->info.info_len;
>>  	char __user *uinsns;
>> -	u32 ulen;
>> +	u32 ulen, i;
>>  	int err;
>>  
>>  	err = check_uarg_tail_zero(uinfo, sizeof(info), info_len);
>> @@ -1922,7 +1922,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>  	ulen = min_t(u32, info.nr_map_ids, ulen);
>>  	if (ulen) {
>>  		u32 __user *user_map_ids = u64_to_user_ptr(info.map_ids);
>> -		u32 i;
>>  
>>  		for (i = 0; i < ulen; i++)
>>  			if (put_user(prog->aux->used_maps[i]->id,
>> @@ -1970,13 +1969,41 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>  	 * for offload.
>>  	 */
>>  	ulen = info.jited_prog_len;
>> -	info.jited_prog_len = prog->jited_len;
>> +	if (prog->aux->func_cnt) {
>> +		info.jited_prog_len = 0;
>> +		for (i = 0; i < prog->aux->func_cnt; i++)
>> +			info.jited_prog_len += prog->aux->func[i]->jited_len;
>> +	} else {
>> +		info.jited_prog_len = prog->jited_len;
>> +	}
>> +
>>  	if (info.jited_prog_len && ulen) {
>>  		if (bpf_dump_raw_ok()) {
>>  			uinsns = u64_to_user_ptr(info.jited_prog_insns);
>>  			ulen = min_t(u32, info.jited_prog_len, ulen);
>> -			if (copy_to_user(uinsns, prog->bpf_func, ulen))
>> -				return -EFAULT;
>> +
>> +			/* for multi-function programs, copy the JITed
>> +			 * instructions for all the functions
>> +			 */
>> +			if (prog->aux->func_cnt) {
>> +				u32 len, free;
>> +				u8 *img;
>> +
>> +				free = ulen;
>> +				for (i = 0; i < prog->aux->func_cnt; i++) {
>> +					len = prog->aux->func[i]->jited_len;
>> +					img = (u8 *) prog->aux->func[i]->bpf_func;
>> +					if (len > free)
>> +						break;
>> +					if (copy_to_user(uinsns, img, len))
>> +						return -EFAULT;
>> +					uinsns += len;
>> +					free -= len;
> 
> Is there any way we can introduce a delimiter between the different
> images such that they could be more easily correlated with the call
> from the main (or other sub-)program instead of having one contiguous
> dump blob?
> 

Can we have another member in bpf_prog_info that points to a list of the lengths of the
JITed images for each subprogram? We can use this information to split up the dump.

- Sandipan 

>> +				}
>> +			} else {
>> +				if (copy_to_user(uinsns, prog->bpf_func, ulen))
>> +					return -EFAULT;
>> +			}
>>  		} else {
>>  			info.jited_prog_insns = 0;
>>  		}
>> @@ -1987,7 +2014,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>  	if (info.nr_jited_ksyms && ulen) {
>>  		u64 __user *user_jited_ksyms = u64_to_user_ptr(info.jited_ksyms);
>>  		ulong ksym_addr;
>> -		u32 i;
>>  
>>  		/* copy the address of the kernel symbol corresponding to
>>  		 * each function
>>
> 
> 

Re: [PATCH bpf v2 6/6] bpf: fix JITed dump for multi-function programs via syscall

[Daniel Borkmann]

On 05/21/2018 09:42 PM, Sandipan Das wrote:
> On 05/18/2018 09:21 PM, Daniel Borkmann wrote:
>> On 05/18/2018 02:50 PM, Sandipan Das wrote:
>>> Currently, for multi-function programs, we cannot get the JITed
>>> instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
>>> command. Because of this, userspace tools such as bpftool fail
>>> to identify a multi-function program as being JITed or not.
>>>
>>> With the JIT enabled and the test program running, this can be
>>> verified as follows:
>>>
>>>   # cat /proc/sys/net/core/bpf_jit_enable
>>>   1
>>>
>>> Before applying this patch:
>>>
>>>   # bpftool prog list
>>>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>>>           loaded_at 2018-05-16T11:43:38+0530  uid 0
>>>           xlated 216B  not jited  memlock 65536B
>>>   ...
>>>
>>>   # bpftool prog dump jited id 1
>>>   no instructions returned
>>>
>>> After applying this patch:
>>>
>>>   # bpftool prog list
>>>   1: kprobe  name foo  tag b811aab41a39ad3d  gpl
>>>           loaded_at 2018-05-16T12:13:01+0530  uid 0
>>>           xlated 216B  jited 308B  memlock 65536B
>>>   ...
>>
>> That's really nice! One comment inline below:
>>
>>>   # bpftool prog dump jited id 1
>>>      0:   nop
>>>      4:   nop
>>>      8:   mflr    r0
>>>      c:   std     r0,16(r1)
>>>     10:   stdu    r1,-112(r1)
>>>     14:   std     r31,104(r1)
>>>     18:   addi    r31,r1,48
>>>     1c:   li      r3,10
>>>   ...
>>>
>>> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
>>> ---
>>>  kernel/bpf/syscall.c | 38 ++++++++++++++++++++++++++++++++------
>>>  1 file changed, 32 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
>>> index 54a72fafe57c..2430d159078c 100644
>>> --- a/kernel/bpf/syscall.c
>>> +++ b/kernel/bpf/syscall.c
>>> @@ -1896,7 +1896,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>>  	struct bpf_prog_info info = {};
>>>  	u32 info_len = attr->info.info_len;
>>>  	char __user *uinsns;
>>> -	u32 ulen;
>>> +	u32 ulen, i;
>>>  	int err;
>>>  
>>>  	err = check_uarg_tail_zero(uinfo, sizeof(info), info_len);
>>> @@ -1922,7 +1922,6 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>>  	ulen = min_t(u32, info.nr_map_ids, ulen);
>>>  	if (ulen) {
>>>  		u32 __user *user_map_ids = u64_to_user_ptr(info.map_ids);
>>> -		u32 i;
>>>  
>>>  		for (i = 0; i < ulen; i++)
>>>  			if (put_user(prog->aux->used_maps[i]->id,
>>> @@ -1970,13 +1969,41 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog,
>>>  	 * for offload.
>>>  	 */
>>>  	ulen = info.jited_prog_len;
>>> -	info.jited_prog_len = prog->jited_len;
>>> +	if (prog->aux->func_cnt) {
>>> +		info.jited_prog_len = 0;
>>> +		for (i = 0; i < prog->aux->func_cnt; i++)
>>> +			info.jited_prog_len += prog->aux->func[i]->jited_len;
>>> +	} else {
>>> +		info.jited_prog_len = prog->jited_len;
>>> +	}
>>> +
>>>  	if (info.jited_prog_len && ulen) {
>>>  		if (bpf_dump_raw_ok()) {
>>>  			uinsns = u64_to_user_ptr(info.jited_prog_insns);
>>>  			ulen = min_t(u32, info.jited_prog_len, ulen);
>>> -			if (copy_to_user(uinsns, prog->bpf_func, ulen))
>>> -				return -EFAULT;
>>> +
>>> +			/* for multi-function programs, copy the JITed
>>> +			 * instructions for all the functions
>>> +			 */
>>> +			if (prog->aux->func_cnt) {
>>> +				u32 len, free;
>>> +				u8 *img;
>>> +
>>> +				free = ulen;
>>> +				for (i = 0; i < prog->aux->func_cnt; i++) {
>>> +					len = prog->aux->func[i]->jited_len;
>>> +					img = (u8 *) prog->aux->func[i]->bpf_func;
>>> +					if (len > free)
>>> +						break;
>>> +					if (copy_to_user(uinsns, img, len))
>>> +						return -EFAULT;
>>> +					uinsns += len;
>>> +					free -= len;
>>
>> Is there any way we can introduce a delimiter between the different
>> images such that they could be more easily correlated with the call
>> from the main (or other sub-)program instead of having one contiguous
>> dump blob?
> 
> Can we have another member in bpf_prog_info that points to a list of the lengths of the
> JITed images for each subprogram? We can use this information to split up the dump.

Seems okay to me.

Thanks,
Daniel

Re: [PATCH bpf v2 4/6] tools: bpf: sync bpf uapi header

[Alexei Starovoitov]

On Fri, May 18, 2018 at 5:50 AM, Sandipan Das
<sandipan@linux.vnet.ibm.com> wrote:
> Syncing the bpf.h uapi header with tools so that struct
> bpf_prog_info has the two new fields for passing on the
> addresses of the kernel symbols corresponding to each
> function in a JITed program.
>
> Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
> ---
>  tools/include/uapi/linux/bpf.h | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
> index d94d333a8225..040c9cac7303 100644
> --- a/tools/include/uapi/linux/bpf.h
> +++ b/tools/include/uapi/linux/bpf.h
> @@ -2188,6 +2188,8 @@ struct bpf_prog_info {
>         __u32 xlated_prog_len;
>         __aligned_u64 jited_prog_insns;
>         __aligned_u64 xlated_prog_insns;
> +       __aligned_u64 jited_ksyms;
> +       __u32 nr_jited_ksyms;
>         __u64 load_time;        /* ns since boottime */
>         __u32 created_by_uid;
>         __u32 nr_map_ids;

this breaks uapi.
New fields can only be added to the end.