linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: linuxppc-dev@lists.ozlabs.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
	Alistair Popple <alistair@popple.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Russell Currey <ruscur@russell.cc>
Subject: [PATCH kernel 2/2] powerpc/powernv: Define PHB4 type and enable sketchy bypass on POWER9
Date: Fri,  1 Jun 2018 18:10:28 +1000	[thread overview]
Message-ID: <20180601081028.29401-3-aik@ozlabs.ru> (raw)
In-Reply-To: <20180601081028.29401-1-aik@ozlabs.ru>

These are found in POWER9 chips. Right now these PHBs have unknown type
so changing it to PHB4 won't make much of a difference except enabling
sketchy bypass for POWER9 as this does below.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/platforms/powernv/pci.h      | 1 +
 arch/powerpc/platforms/powernv/pci-ioda.c | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index eada4b6..1408247 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -23,6 +23,7 @@ enum pnv_phb_model {
 	PNV_PHB_MODEL_UNKNOWN,
 	PNV_PHB_MODEL_P7IOC,
 	PNV_PHB_MODEL_PHB3,
+	PNV_PHB_MODEL_PHB4,
 	PNV_PHB_MODEL_NPU,
 	PNV_PHB_MODEL_NPU2,
 };
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9239142..66c2804 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1882,7 +1882,8 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 		if (dma_mask >> 32 &&
 		    dma_mask > (memory_hotplug_max() + (1ULL << 32)) &&
 		    pnv_pci_ioda_pe_single_vendor(pe) &&
-		    phb->model == PNV_PHB_MODEL_PHB3) {
+		    (phb->model == PNV_PHB_MODEL_PHB3 ||
+		     phb->model == PNV_PHB_MODEL_PHB4)) {
 			/* Configure the bypass mode */
 			rc = pnv_pci_ioda_dma_64bit_bypass(pe);
 			if (rc)
@@ -3930,6 +3931,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		phb->model = PNV_PHB_MODEL_P7IOC;
 	else if (of_device_is_compatible(np, "ibm,power8-pciex"))
 		phb->model = PNV_PHB_MODEL_PHB3;
+	else if (of_device_is_compatible(np, "ibm,power9-pciex"))
+		phb->model = PNV_PHB_MODEL_PHB4;
 	else if (of_device_is_compatible(np, "ibm,power8-npu-pciex"))
 		phb->model = PNV_PHB_MODEL_NPU;
 	else if (of_device_is_compatible(np, "ibm,power9-npu-pciex"))
-- 
2.11.0

  parent reply	other threads:[~2018-06-01  8:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-01  8:10 [PATCH kernel 0/2] powerpc/powernv: Rework sketchy bypass Alexey Kardashevskiy
2018-06-01  8:10 ` [PATCH kernel 1/2] powerpc/powernv: Reuse existing TCE code for " Alexey Kardashevskiy
2018-06-16  1:04   ` Benjamin Herrenschmidt
2018-07-02  8:50     ` Alexey Kardashevskiy
2018-06-01  8:10 ` Alexey Kardashevskiy [this message]
2018-06-16  1:05   ` [PATCH kernel 2/2] powerpc/powernv: Define PHB4 type and enable sketchy bypass on POWER9 Benjamin Herrenschmidt
2018-06-18  2:13     ` Alexey Kardashevskiy
2018-06-18  4:44       ` Benjamin Herrenschmidt
2018-06-18  7:20         ` Alexey Kardashevskiy
2018-06-15  9:01 ` [PATCH kernel 0/2] powerpc/powernv: Rework sketchy bypass Alexey Kardashevskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180601081028.29401-3-aik@ozlabs.ru \
    --to=aik@ozlabs.ru \
    --cc=alistair@popple.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=ruscur@russell.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).