[PATCH v3 0/6] powerpc/fsl: Speculation barrier for NXP PowerPC Book3E

[PATCH v3 0/6] powerpc/fsl: Speculation barrier for NXP PowerPC Book3E

[Diana Craciun]

Implement barrier_nospec for NXP PowerPC Book3E processors.

Diana Craciun (6):
  Disable the speculation barrier from the command line
  Document nospectre_v1 kernel parameter.
  Make stf barrier PPC_BOOK3S_64 specific.
  Enable cpu vulnerabilities reporting for NXP PPC BOOK3E
  Add barrier_nospec implementation for NXP PowerPC Book3E
  powerpc/fsl: Sanitize the syscall table for NXP PowerPC 32 bit
    platforms

 Documentation/admin-guide/kernel-parameters.txt |  4 +++
 arch/powerpc/Kconfig                            |  7 ++++-
 arch/powerpc/include/asm/barrier.h              | 12 ++++++---
 arch/powerpc/include/asm/setup.h                |  6 ++++-
 arch/powerpc/kernel/Makefile                    |  3 ++-
 arch/powerpc/kernel/entry_32.S                  | 10 +++++++
 arch/powerpc/kernel/module.c                    |  4 ++-
 arch/powerpc/kernel/security.c                  | 17 +++++++++++-
 arch/powerpc/kernel/setup-common.c              |  2 ++
 arch/powerpc/kernel/vmlinux.lds.S               |  4 ++-
 arch/powerpc/lib/feature-fixups.c               | 35 ++++++++++++++++++++++++-
 arch/powerpc/platforms/powernv/setup.c          |  1 -
 arch/powerpc/platforms/pseries/setup.c          |  1 -
 13 files changed, 94 insertions(+), 12 deletions(-)

--
History:

v2 --> v3
- addressed review comments
- included the 32bit sanitization in the same patch series

v1 --> v2
- added implementation for cpu_show_spectre_x functions
- the mitigation is no longer enabled through device tree options

2.5.5

[PATCH v3 1/6] powerpc/fsl: Disable the speculation barrier from the command line

[Diana Craciun]

The speculation barrier can be disabled from the command line
with the parameter: "nospectre_v1".

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- no changes

 arch/powerpc/kernel/security.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index a8b2773..2ebfc5b 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -16,6 +16,7 @@
 unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
 
 bool barrier_nospec_enabled;
+static bool no_nospec;
 
 static void enable_barrier_nospec(bool enable)
 {
@@ -42,9 +43,18 @@ void setup_barrier_nospec(void)
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 		 security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR);
 
-	enable_barrier_nospec(enable);
+	if (!no_nospec)
+		enable_barrier_nospec(enable);
 }
 
+static int __init handle_nospectre_v1(char *p)
+{
+	no_nospec = true;
+
+	return 0;
+}
+early_param("nospectre_v1", handle_nospectre_v1);
+
 #ifdef CONFIG_DEBUG_FS
 static int barrier_nospec_set(void *data, u64 val)
 {
-- 
2.5.5

[PATCH v3 2/6] powerpc/fsl: Document nospectre_v1 kernel parameter.

[Diana Craciun]

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- new

 Documentation/admin-guide/kernel-parameters.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index efc7aa7..b346cc7 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2687,6 +2687,10 @@
 	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
 
+	nospectre_v1	[PPC] Disable mitigations for Spectre Variant 1
+				(bounds check bypass). With this option data leaks are
+				possible in the system.
+
 	nospectre_v2	[X86] Disable all mitigations for the Spectre variant 2
 			(indirect branch prediction) vulnerability. System may
 			allow data leaks with this option, which is equivalent
-- 
2.5.5

[PATCH v3 3/6] powerpc/fsl: Make stf barrier PPC_BOOK3S_64 specific.

[Diana Craciun]

NXP Book3E platforms are not vulnerable to speculative store
bypass, so make the mitigations PPC_BOOK3S_64 specific.

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- new

 arch/powerpc/kernel/security.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index 2ebfc5b..3a4e5c3 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -169,6 +169,7 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c
 	return s.len;
 }
 
+#ifdef CONFIG_PPC_BOOK3S_64
 /*
  * Store-forwarding barrier support.
  */
@@ -316,3 +317,5 @@ static __init int stf_barrier_debugfs_init(void)
 }
 device_initcall(stf_barrier_debugfs_init);
 #endif /* CONFIG_DEBUG_FS */
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
-- 
2.5.5

[PATCH v3 4/6] powerpc/fsl: Enable cpu vulnerabilities reporting for NXP PPC BOOK3E

[Diana Craciun]

The NXP PPC Book3E platforms are not vulnerable to meltdown, so make it 
PPC_BOOK3S_64 specific.

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- used the existing functions for spectre v1/v2

 arch/powerpc/Kconfig           | 7 ++++++-
 arch/powerpc/kernel/security.c | 2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9f2b75f..116c953 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -165,7 +165,7 @@ config PPC
 	select GENERIC_CLOCKEVENTS_BROADCAST	if SMP
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
-	select GENERIC_CPU_VULNERABILITIES	if PPC_BOOK3S_64
+	select GENERIC_CPU_VULNERABILITIES	if PPC_NOSPEC
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_SMP_IDLE_THREAD
@@ -240,6 +240,11 @@ config PPC
 	# Please keep this list sorted alphabetically.
 	#
 
+config PPC_NOSPEC
+    bool
+    default y
+    depends on PPC_BOOK3S_64 || PPC_FSL_BOOK3E
+
 config GENERIC_CSUM
 	def_bool n
 
diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index 3a4e5c3..539c744 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -92,6 +92,7 @@ static __init int barrier_nospec_debugfs_init(void)
 device_initcall(barrier_nospec_debugfs_init);
 #endif /* CONFIG_DEBUG_FS */
 
+#ifdef CONFIG_PPC_BOOK3S_64
 ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	bool thread_priv;
@@ -124,6 +125,7 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	return sprintf(buf, "Vulnerable\n");
 }
+#endif
 
 ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
 {
-- 
2.5.5

[PATCH v3 5/6] powerpc/fsl: Add barrier_nospec implementation for NXP PowerPC Book3E

[Diana Craciun]

Implement the barrier_nospec as a isync;sync instruction sequence.
The implementation uses the infrastructure built for BOOK3S 64.

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- added PPC_NOSPEC Kconfig
- addressed the review comments

It was a discussion at the previous review cycle about the place in the code
where to call setup_barrier_nospec. I have chosen to call the function in the
common code in order to be re-used on multiple platforms. However, I am not sure
that changes concerning powernv/pseries are correct, I need some input here.

 arch/powerpc/include/asm/barrier.h     | 12 +++++++++---
 arch/powerpc/include/asm/setup.h       |  6 +++++-
 arch/powerpc/kernel/Makefile           |  3 ++-
 arch/powerpc/kernel/module.c           |  4 +++-
 arch/powerpc/kernel/setup-common.c     |  2 ++
 arch/powerpc/kernel/vmlinux.lds.S      |  4 +++-
 arch/powerpc/lib/feature-fixups.c      | 35 +++++++++++++++++++++++++++++++++-
 arch/powerpc/platforms/powernv/setup.c |  1 -
 arch/powerpc/platforms/pseries/setup.c |  1 -
 9 files changed, 58 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h
index f67b3f6..0bdfa81 100644
--- a/arch/powerpc/include/asm/barrier.h
+++ b/arch/powerpc/include/asm/barrier.h
@@ -77,19 +77,25 @@ do {									\
 })
 
 #ifdef CONFIG_PPC_BOOK3S_64
+#define NOSPEC_BARRIER_SLOT   nop
+#elif defined(CONFIG_PPC_FSL_BOOK3E)
+#define NOSPEC_BARRIER_SLOT   nop; nop
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+#ifdef CONFIG_PPC_NOSPEC
 /*
  * Prevent execution of subsequent instructions until preceding branches have
  * been fully resolved and are no longer executing speculatively.
  */
-#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; nop
+#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; NOSPEC_BARRIER_SLOT
 
 // This also acts as a compiler barrier due to the memory clobber.
 #define barrier_nospec() asm (stringify_in_c(barrier_nospec_asm) ::: "memory")
 
-#else /* !CONFIG_PPC_BOOK3S_64 */
+#else /* !CONFIG_PPC_NOSPEC */
 #define barrier_nospec_asm
 #define barrier_nospec()
-#endif
+#endif /* CONFIG_PPC_NOSPEC */
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 8721fd0..1abe152 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -52,11 +52,15 @@ enum l1d_flush_type {
 
 void setup_rfi_flush(enum l1d_flush_type, bool enable);
 void do_rfi_flush_fixups(enum l1d_flush_type types);
+#ifdef CONFIG_PPC_NOSPEC
 void setup_barrier_nospec(void);
+#else
+void setup_barrier_nospec(void) { };
+#endif
 void do_barrier_nospec_fixups(bool enable);
 extern bool barrier_nospec_enabled;
 
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_NOSPEC
 void do_barrier_nospec_fixups_range(bool enable, void *start, void *end);
 #else
 static inline void do_barrier_nospec_fixups_range(bool enable, void *start, void *end) { };
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 2b4c40b2..cd0eb38 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -42,9 +42,10 @@ obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
-obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o security.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= mce.o mce_power.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
+obj-$(CONFIG_PPC_NOSPEC) += security.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 1b3c683..a0c4967 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -72,13 +72,15 @@ int module_finalize(const Elf_Ehdr *hdr,
 		do_feature_fixups(powerpc_firmware_features,
 				  (void *)sect->sh_addr,
 				  (void *)sect->sh_addr + sect->sh_size);
+#endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_PPC64) || defined(CONFIG_PPC_FSL_BOOK3E)
 	sect = find_section(hdr, sechdrs, "__spec_barrier_fixup");
 	if (sect != NULL)
 		do_barrier_nospec_fixups_range(barrier_nospec_enabled,
 				  (void *)sect->sh_addr,
 				  (void *)sect->sh_addr + sect->sh_size);
-#endif
+#endif /* CONFIG_PPC64 || CONFIG_PPC_FSL_BOOK3E */
 
 	sect = find_section(hdr, sechdrs, "__lwsync_fixup");
 	if (sect != NULL)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 40b44bb..93fa0c9 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -972,6 +972,8 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
+	setup_barrier_nospec();
+
 	paging_init();
 
 	/* Initialize the MMU context management stuff. */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 5baac79..6087b02 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -153,14 +153,16 @@ SECTIONS
 		*(__rfi_flush_fixup)
 		__stop___rfi_flush_fixup = .;
 	}
+#endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_PPC64) || defined(CONFIG_PPC_FSL_BOOK3E)
 	. = ALIGN(8);
 	__spec_barrier_fixup : AT(ADDR(__spec_barrier_fixup) - LOAD_OFFSET) {
 		__start___barrier_nospec_fixup = .;
 		*(__barrier_nospec_fixup)
 		__stop___barrier_nospec_fixup = .;
 	}
-#endif
+#endif /* CONFIG_PPC64 || CONFIG_PPC_FSL_BOOK3E */
 
 	EXCEPTION_TABLE(0)
 
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 8b69f86..41f372e 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -304,6 +304,9 @@ void do_barrier_nospec_fixups_range(bool enable, void *fixup_start, void *fixup_
 	printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
 }
 
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+#ifdef CONFIG_PPC_NOSPEC
 void do_barrier_nospec_fixups(bool enable)
 {
 	void *start, *end;
@@ -313,8 +316,38 @@ void do_barrier_nospec_fixups(bool enable)
 
 	do_barrier_nospec_fixups_range(enable, start, end);
 }
+#endif /* CONFIG_PPC_NOSPEC */
 
-#endif /* CONFIG_PPC_BOOK3S_64 */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+void do_barrier_nospec_fixups_range(bool enable, void *fixup_start, void *fixup_end)
+{
+	unsigned int instr[2], *dest;
+	long *start, *end;
+	int i;
+
+	start = fixup_start;
+	end = fixup_end;
+
+	instr[0] = PPC_INST_NOP;
+	instr[1] = PPC_INST_NOP;
+
+	if (enable) {
+		pr_info("barrier-nospec: using isync; sync as speculation barrier\n");
+		instr[0] = PPC_INST_ISYNC;
+		instr[1] = PPC_INST_SYNC;
+	}
+
+	for (i = 0; start < end; start++, i++) {
+		dest = (void *)start + *start;
+
+		pr_devel("patching dest %lx\n", (unsigned long)dest);
+		patch_instruction(dest, instr[0]);
+		patch_instruction(dest + 1, instr[1]);
+	}
+
+	printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
+}
+#endif /* CONFIG_PPC_FSL_BOOK3E */
 
 void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index f96df0a..1ab6dc7 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -124,7 +124,6 @@ static void pnv_setup_rfi_flush(void)
 		  security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
 
 	setup_rfi_flush(type, enable);
-	setup_barrier_nospec();
 }
 
 static void __init pnv_setup_arch(void)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 139f0af..fdb32e0 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -534,7 +534,6 @@ void pseries_setup_rfi_flush(void)
 		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR);
 
 	setup_rfi_flush(types, enable);
-	setup_barrier_nospec();
 }
 
 #ifdef CONFIG_PCI_IOV
-- 
2.5.5

[PATCH v3 6/6] powerpc/fsl: Sanitize the syscall table for NXP PowerPC 32 bit platforms

[Diana Craciun]

Used barrier_nospec to sanitize the syscall table.

Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
---
History:

v2-->v3
- included in the series

 arch/powerpc/kernel/entry_32.S | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 973577f..8f05280 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -33,6 +33,7 @@
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/export.h>
+#include <asm/barrier.h>
 
 /*
  * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
@@ -358,6 +359,15 @@ syscall_dotrace_cont:
 	ori	r10,r10,sys_call_table@l
 	slwi	r0,r0,2
 	bge-	66f
+
+	barrier_nospec_asm
+	/*
+	 * Prevent the load of the handler below (based on the user-passed
+	 * system call number) being speculatively executed until the test
+	 * against NR_syscalls and branch to .66f above has
+	 * committed.
+	 */
+
 	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
 	mtlr	r10
 	addi	r9,r1,STACK_FRAME_OVERHEAD
-- 
2.5.5

Re: [PATCH v3 5/6] powerpc/fsl: Add barrier_nospec implementation for NXP PowerPC Book3E

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 7856 bytes --]

Hi Diana,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on powerpc/next]
[also build test ERROR on v4.18-rc5 next-20180713]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Diana-Craciun/powerpc-fsl-Disable-the-speculation-barrier-from-the-command-line/20180714-130716
base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: powerpc-bluestone_defconfig (attached as .config)
compiler: powerpc-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.2.0 make.cross ARCH=powerpc 
:::::: branch date: 2 days ago
:::::: commit date: 2 days ago

All errors (new ones prefixed by >>):

   arch/powerpc/kernel/cputable.o: In function `setup_barrier_nospec':
>> cputable.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/irq.o: In function `setup_barrier_nospec':
   irq.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/vdso.o: In function `setup_barrier_nospec':
   vdso.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/process.o: In function `setup_barrier_nospec':
   process.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/idle.o: In function `setup_barrier_nospec':
   idle.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/sysfs.o: In function `setup_barrier_nospec':
   sysfs.c:(.text+0x98): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/time.o: In function `setup_barrier_nospec':
   time.c:(.text+0x14c): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/prom.o: In function `setup_barrier_nospec':
   prom.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/traps.o: In function `setup_barrier_nospec':
   traps.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/setup-common.o: In function `setup_barrier_nospec':
   setup-common.c:(.text+0x428): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/dma.o: In function `setup_barrier_nospec':
   dma.c:(.text+0x3dc): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/of_platform.o: In function `setup_barrier_nospec':
   of_platform.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/proc_powerpc.o: In function `setup_barrier_nospec':
   proc_powerpc.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/setup_32.o: In function `setup_barrier_nospec':
   setup_32.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/legacy_serial.o: In function `setup_barrier_nospec':
   legacy_serial.c:(.text+0x90): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/pci_32.o: In function `setup_barrier_nospec':
   pci_32.c:(.text+0x1c8): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/pci-common.o: In function `setup_barrier_nospec':
   pci-common.c:(.text+0x61c): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/pci_of_scan.o: In function `setup_barrier_nospec':
   pci_of_scan.c:(.text+0x4c): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/msi.o: In function `setup_barrier_nospec':
   msi.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/kernel/iomap.o: In function `setup_barrier_nospec':
   iomap.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/mm/mem.o: In function `setup_barrier_nospec':
   mem.c:(.text+0x18): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/mm/init_32.o: In function `setup_barrier_nospec':
   init_32.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/mm/pgtable_32.o: In function `setup_barrier_nospec':
   pgtable_32.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/mm/hugetlbpage.o: In function `setup_barrier_nospec':
   hugetlbpage.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/lib/alloc.o: In function `setup_barrier_nospec':
   alloc.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/lib/code-patching.o: In function `setup_barrier_nospec':
   code-patching.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/lib/feature-fixups.o: In function `setup_barrier_nospec':
   feature-fixups.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/sysdev/msi_bitmap.o: In function `setup_barrier_nospec':
   msi_bitmap.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/sysdev/indirect_pci.o: In function `setup_barrier_nospec':
   indirect_pci.c:(.text+0x220): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/platforms/4xx/pci.o: In function `setup_barrier_nospec':
   pci.c:(.text+0x954): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/platforms/4xx/msi.o: In function `setup_barrier_nospec':
   msi.c:(.text+0x6d0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/platforms/4xx/cpm.o: In function `setup_barrier_nospec':
   cpm.c:(.text+0x410): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   arch/powerpc/platforms/44x/ppc44x_simple.o: In function `setup_barrier_nospec':
   ppc44x_simple.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here
   block/blk-mq-pci.o: In function `setup_barrier_nospec':
   blk-mq-pci.c:(.text+0x0): multiple definition of `setup_barrier_nospec'
   init/main.o:main.c:(.text+0x9c): first defined here

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 14904 bytes --]