* [PATCH v4 1/9] powerpc: build .dtb files in dts directory
2018-10-01 15:25 [PATCH v4 0/9] Devicetree build consolidation Rob Herring
@ 2018-10-01 15:25 ` Rob Herring
2018-10-01 15:25 ` [PATCH v4 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
2018-10-01 15:25 ` [PATCH v4 7/9] powerpc: enable building all dtbs Rob Herring
2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2018-10-01 15:25 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada, Frank Rowand
Cc: Paul Mackerras, linuxppc-dev
Align powerpc with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in the
old location.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
PPC maintainers, really need you review/ack on this.
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/Makefile | 55 ++++++++++++++++------------------
arch/powerpc/boot/dts/Makefile | 1 +
3 files changed, 28 insertions(+), 30 deletions(-)
create mode 100644 arch/powerpc/boot/dts/Makefile
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 11a1acba164a..53ea887eb34e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -294,7 +294,7 @@ bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+ $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 0fb96c26136f..bca5c23767df 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -304,9 +304,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb
-image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb
-image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
+image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
@@ -381,11 +381,11 @@ $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperb
$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
- $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
- $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
@@ -395,36 +395,33 @@ $(obj)/vmlinux.strip: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits) FORCE
$(call if_changed,wrap,uboot)
-$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
-$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE
- $(call if_changed_dep,dtc)
+# Needed for the above targets to work with dts/fsl/ files
+$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
+ @cp $< $@
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
new file mode 100644
index 000000000000..f66554cd5c45
--- /dev/null
+++ b/arch/powerpc/boot/dts/Makefile
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 6/9] kbuild: consolidate Devicetree dtb build rules
2018-10-01 15:25 [PATCH v4 0/9] Devicetree build consolidation Rob Herring
2018-10-01 15:25 ` [PATCH v4 1/9] powerpc: build .dtb files in dts directory Rob Herring
@ 2018-10-01 15:25 ` Rob Herring
2018-10-01 20:34 ` Masahiro Yamada
2018-10-01 15:25 ` [PATCH v4 7/9] powerpc: enable building all dtbs Rob Herring
2 siblings, 1 reply; 5+ messages in thread
From: Rob Herring @ 2018-10-01 15:25 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada, Frank Rowand
Cc: linux-mips, Will Deacon, Max Filippov, Paul Mackerras,
Yoshinori Sato, Russell King, Ley Foon Tan, Catalin Marinas,
James Hogan, linux-snps-arc, uclinux-h8-devel, linux-xtensa,
linux-kbuild, linux-arm-kernel, Chris Zankel, Michal Simek,
Michal Marek, Vineet Gupta, Ralf Baechle, Paul Burton, nios2-dev,
linuxppc-dev
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
v4:
- Make dtbs and %.dtb rules depend on arch/$ARCH/boot/dts path rather than
CONFIG_OF_EARLY_FLATTREE
- Fix install path missing kernel version for dtbs_install
- Fix "make CONFIG_OF_ALL_DTBS=y" for arches like ARM which selectively
enable CONFIG_OF (and therefore dtc)
Makefile | 37 ++++++++++++++++++++++++++++++-
arch/arc/Makefile | 6 -----
arch/arm/Makefile | 20 +----------------
arch/arm64/Makefile | 17 +-------------
arch/c6x/Makefile | 2 --
arch/h8300/Makefile | 11 +--------
arch/microblaze/Makefile | 4 +---
arch/microblaze/boot/dts/Makefile | 2 ++
arch/mips/Makefile | 15 +------------
arch/nds32/Makefile | 2 +-
arch/nios2/Makefile | 7 ------
arch/nios2/boot/Makefile | 4 ----
arch/powerpc/Makefile | 3 ---
arch/xtensa/Makefile | 12 +---------
scripts/Makefile | 3 +--
scripts/Makefile.lib | 2 +-
scripts/dtc/Makefile | 2 +-
17 files changed, 48 insertions(+), 101 deletions(-)
diff --git a/Makefile b/Makefile
index 6c3da3e10f07..251875470c5b 100644
--- a/Makefile
+++ b/Makefile
@@ -1061,7 +1061,7 @@ include/config/kernel.release: $(srctree)/Makefile FORCE
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
-scripts: scripts_basic asm-generic gcc-plugins $(autoksyms_h)
+scripts: scripts_basic scripts_dtc asm-generic gcc-plugins $(autoksyms_h)
$(Q)$(MAKE) $(build)=$(@)
# Things we need to do before we recursively start building the kernel
@@ -1205,6 +1205,35 @@ kselftest-merge:
$(srctree)/tools/testing/selftests/*/config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+# ---------------------------------------------------------------------------
+# Devicetree files
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
+dtstree := arch/$(SRCARCH)/boot/dts
+endif
+
+ifneq ($(dtstree),)
+
+%.dtb: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
+PHONY += dtbs dtbs_install
+dtbs: prepare3 scripts_dtc
+ $(Q)$(MAKE) $(build)=$(dtstree)
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(dtstree)
+
+ifdef CONFIG_OF_EARLY_FLATTREE
+all: dtbs
+endif
+
+endif
+
+PHONY += scripts_dtc
+scripts_dtc: scripts_basic
+ $(Q)$(MAKE) $(build)=scripts/dtc
+
# ---------------------------------------------------------------------------
# Modules
@@ -1414,6 +1443,12 @@ help:
@echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
@echo ' .config.'
@echo ''
+ @$(if $(dtstree), \
+ echo 'Devicetree:'; \
+ echo '* dtbs - Build device tree blobs for enabled boards'; \
+ echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \
+ echo '')
+
@echo 'Userspace tools targets:'
@echo ' use "make tools/help"'
@echo ' or "cd tools; make help"'
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 99cce77ab98f..caece8866080 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -124,11 +124,5 @@ boot_targets += uImage uImage.bin uImage.gz
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-%.dtb %.dtb.S %.dtb.o: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d1516f85f25d..161c2df6567e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -307,12 +307,7 @@ else
KBUILD_IMAGE := $(boot)/zImage
endif
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
-endif
-
-all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
+all: $(notdir $(KBUILD_IMAGE))
archheaders:
@@ -339,17 +334,6 @@ $(BOOT_TARGETS): vmlinux
$(INSTALL_TARGETS):
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: | scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
@@ -371,8 +355,6 @@ define archhelp
echo ' uImage - U-Boot wrapped zImage'
echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' uinstall - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 106039d25e2f..b4e994cd3a42 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
# Default target when executing plain make
boot := arch/arm64/boot
KBUILD_IMAGE := $(boot)/Image.gz
-KBUILD_DTBS := dtbs
-all: Image.gz $(KBUILD_DTBS)
+all: Image.gz
Image: vmlinux
@@ -127,17 +126,6 @@ Image.%: Image
zinstall install:
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
@@ -145,7 +133,6 @@ vdso_install:
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
- $(Q)$(MAKE) $(clean)=$(boot)/dts
# We need to generate vdso-offsets.h before compiling certain files in kernel/.
# In order to do that, we should use the archprepare target, but we can't since
@@ -160,8 +147,6 @@ vdso_prepare: prepare0
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
- echo '* dtbs - Build device tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index 3fe8a948e94c..b7aa854f7008 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -40,9 +40,7 @@ boot := arch/$(ARCH)/boot
DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS)))
export DTB
-ifneq ($(DTB),)
core-y += $(boot)/dts/
-endif
# With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 58634e6bae92..4003ddc616e1 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -31,21 +31,12 @@ CROSS_COMPILE := h8300-unknown-linux-
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
-ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
-core-y += arch/h8300/boot/dts/
-endif
+core-y += arch/$(ARCH)/boot/dts/
libs-y += arch/$(ARCH)/lib/
boot := arch/h8300/boot
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts arch/h8300/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/h8300/boot/dts
-
archmrproper:
archclean:
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 4f3ab5707265..0823d291fbeb 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -65,9 +65,7 @@ boot := arch/microblaze/boot
# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
-ifneq ($(DTB),)
- core-y += $(boot)/dts/
-endif
+core-y += $(boot)/dts/
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index 1f77913d404d..fe9af267f598 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
#
+ifneq ($(DTB),)
obj-y += linked_dtb.o
# Ensure system.dtb exists
@@ -11,6 +12,7 @@ ifneq ($(DTB),system)
$(obj)/system.dtb: $(obj)/$(DTB).dtb
$(call if_changed,cp)
endif
+endif
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d74b3742fa5d..d43eeaa6d75b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -407,18 +407,7 @@ endif
CLEAN_FILES += vmlinux.32 vmlinux.64
# device-trees
-core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
-
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
-
-PHONY += dtbs
-dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts
-
-PHONY += dtbs_install
-dtbs_install:
- $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
+core-y += arch/mips/boot/dts/
archprepare:
ifdef CONFIG_MIPS32_N32
@@ -461,8 +450,6 @@ define archhelp
echo ' uImage.lzma - U-Boot image (lzma)'
echo ' uImage.lzo - U-Boot image (lzo)'
echo ' uzImage.bin - U-Boot image (self-extracting)'
- echo ' dtbs - Device-tree blobs for enabled boards'
- echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
echo
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
index 3509fac10491..9f525ed70049 100644
--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile
@@ -47,7 +47,7 @@ CHECKFLAGS += -D__NDS32_EB__
endif
boot := arch/nds32/boot
-core-$(BUILTIN_DTB) += $(boot)/dts/
+core-y += $(boot)/dts/
.PHONY: FORCE
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index db2e78fe65c7..52c03e60b114 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile
@@ -56,12 +56,6 @@ all: vmImage
archclean:
$(Q)$(MAKE) $(clean)=$(nios2-boot)
-%.dtb %.dtb.S %.dtb.o: | scripts
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@
-
-dtbs:
- $(Q)$(MAKE) $(build)=$(nios2-boot)/dts
-
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
@@ -74,5 +68,4 @@ define archhelp
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
- echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 0b48f1bf086d..37dfc7e584bc 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile
@@ -31,9 +31,5 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-targets += $(dtb-y)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 53ea887eb34e..42f225f6ec93 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -293,9 +293,6 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)
-
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
# and the second argument as a space separated list of .config files to merge,
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index d67e30faff9c..be060dfb1cc3 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -80,28 +80,18 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
core-y += $(buildvar) $(buildplf)
+core-y += arch/xtensa/boot/dts/
libs-y += arch/xtensa/lib/ $(LIBGCC)
drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/
-ifneq ($(CONFIG_BUILTIN_DTB),"")
-core-$(CONFIG_OF) += arch/xtensa/boot/dts/
-endif
-
boot := arch/xtensa/boot
all Image zImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb:
- $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts
-
define archhelp
@echo '* Image - Kernel ELF image with reset vector'
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
@echo '* uImage - U-Boot wrapped image'
- @echo ' dtbs - Build device tree blobs for enabled boards'
endef
diff --git a/scripts/Makefile b/scripts/Makefile
index 61affa300d25..ece52ff20171 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -39,8 +39,7 @@ build_unifdef: $(obj)/unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
-subdir-$(CONFIG_DTC) += dtc
subdir-$(CONFIG_GDB_SCRIPTS) += gdb
# Let clean descend into subdirs
-subdir- += basic kconfig package gcc-plugins
+subdir- += basic dtc kconfig package gcc-plugins
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 61e596650ed3..8fe4468f9bda 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -283,7 +283,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE
quiet_cmd_dtc = DTC $@
cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \
- $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(DTC) -O dtb -o $@ -b 0 \
$(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \
-d $(depfile).dtc.tmp $(dtc-tmp) ; \
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 1c943e03eaf2..e535b457babb 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
# scripts/dtc makefile
-hostprogs-y := dtc
+hostprogs-$(CONFIG_DTC) := dtc
always := $(hostprogs-y)
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v4 6/9] kbuild: consolidate Devicetree dtb build rules
2018-10-01 15:25 ` [PATCH v4 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
@ 2018-10-01 20:34 ` Masahiro Yamada
0 siblings, 0 replies; 5+ messages in thread
From: Masahiro Yamada @ 2018-10-01 20:34 UTC (permalink / raw)
To: Rob Herring
Cc: Linux-MIPS, linux-xtensa, Will Deacon, Max Filippov,
Paul Mackerras, Frank Rowand, Yoshinori Sato, Russell King,
Ley Foon Tan, Catalin Marinas, James Hogan, arcml,
moderated list:H8/300 ARCHITECTURE, DTML,
Linux Kbuild mailing list, linux-arm-kernel, Chris Zankel,
Michal Simek, Michal Marek, Vineet Gupta,
Linux Kernel Mailing List, Ralf Baechle, Paul Burton, nios2-dev,
linuxppc-dev
2018年10月2日(火) 0:26 Rob Herring <robh@kernel.org>:
>
> There is nothing arch specific about building dtb files other than their
> location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
> The dependencies and supported targets are all slightly different.
> Also, a cross-compiler for each arch is needed, but really the host
> compiler preprocessor is perfectly fine for building dtbs. Move the
> build rules to a common location and remove the arch specific ones. This
> is done in a single step to avoid warnings about overriding rules.
>
> The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
> These pull in several dependencies some of which need a target compiler
> (specifically devicetable-offsets.h) and aren't needed to build dtbs.
> All that is really needed is dtc, so adjust the dependencies to only be
> dtc.
>
> This change enables support 'dtbs_install' on some arches which were
> missing the target.
>
> Acked-by: Will Deacon <will.deacon@arm.com>
> Acked-by: Paul Burton <paul.burton@mips.com>
> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Please change this to
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thanks.
> Cc: Michal Marek <michal.lkml@markovi.net>
> Cc: Vineet Gupta <vgupta@synopsys.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
> Cc: Michal Simek <monstr@monstr.eu>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: James Hogan <jhogan@kernel.org>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Chris Zankel <chris@zankel.net>
> Cc: Max Filippov <jcmvbkbc@gmail.com>
> Cc: linux-kbuild@vger.kernel.org
> Cc: linux-snps-arc@lists.infradead.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: uclinux-h8-devel@lists.sourceforge.jp
> Cc: linux-mips@linux-mips.org
> Cc: nios2-dev@lists.rocketboards.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-xtensa@linux-xtensa.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> v4:
> - Make dtbs and %.dtb rules depend on arch/$ARCH/boot/dts path rather than
> CONFIG_OF_EARLY_FLATTREE
> - Fix install path missing kernel version for dtbs_install
> - Fix "make CONFIG_OF_ALL_DTBS=y" for arches like ARM which selectively
> enable CONFIG_OF (and therefore dtc)
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 7/9] powerpc: enable building all dtbs
2018-10-01 15:25 [PATCH v4 0/9] Devicetree build consolidation Rob Herring
2018-10-01 15:25 ` [PATCH v4 1/9] powerpc: build .dtb files in dts directory Rob Herring
2018-10-01 15:25 ` [PATCH v4 6/9] kbuild: consolidate Devicetree dtb build rules Rob Herring
@ 2018-10-01 15:25 ` Rob Herring
2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2018-10-01 15:25 UTC (permalink / raw)
To: devicetree, linux-kernel, Masahiro Yamada, Frank Rowand
Cc: Paul Mackerras, linuxppc-dev
Enable the 'dtbs' target for powerpc. This allows building all the dts
files in arch/powerpc/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are
enabled.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/powerpc/boot/dts/Makefile | 5 +++++
arch/powerpc/boot/dts/fsl/Makefile | 4 ++++
2 files changed, 9 insertions(+)
create mode 100644 arch/powerpc/boot/dts/fsl/Makefile
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
index f66554cd5c45..fb335d05aae8 100644
--- a/arch/powerpc/boot/dts/Makefile
+++ b/arch/powerpc/boot/dts/Makefile
@@ -1 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+
+subdir-y += fsl
+
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile
new file mode 100644
index 000000000000..3bae982641e9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtstree := $(srctree)/$(src)
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread