From: Pankaj Bansal <pankaj.bansal@nxp.com>
To: Leo Li <leoyang.li@nxp.com>
Cc: Alexandru Marginean <alexandru.marginean@nxp.com>,
Pankaj Bansal <pankaj.bansal@nxp.com>,
linuxppc-dev@lists.ozlabs.org,
Wang Dongsheng <dongsheng.wang@freescale.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] fsl: add i2c controlled qixis driver
Date: Fri, 5 Oct 2018 14:25:05 +0530 [thread overview]
Message-ID: <20181005085505.29024-3-pankaj.bansal@nxp.com> (raw)
In-Reply-To: <20181005085505.29024-1-pankaj.bansal@nxp.com>
FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis
driver which is basically an i2c client driver to control FPGA.
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
drivers/soc/fsl/Kconfig | 9 ++++
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/qixis_ctrl.c | 75 ++++++++++++++++++++++++++++++++
include/linux/fsl/qixis_ctrl.h | 20 +++++++++
4 files changed, 105 insertions(+)
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 8f80e8bbf29e..c355c2cbbd45 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -28,4 +28,13 @@ config FSL_MC_DPIO
other DPAA2 objects. This driver does not expose the DPIO
objects individually, but groups them under a service layer
API.
+
+config FSL_QIXIS
+ tristate "QIXIS system controller driver"
+ select REGMAP_I2C
+ default n
+ help
+ Say y here to enable QIXIS system controller api. The qixis driver
+ provides FPGA functions to control system.
+
endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 803ef1bfb5ff..47e0cfc66ca4 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_QIXIS) += qixis_ctrl.o
obj-$(CONFIG_FSL_GUTS) += guts.o
obj-$(CONFIG_FSL_MC_DPIO) += dpio/
diff --git a/drivers/soc/fsl/qixis_ctrl.c b/drivers/soc/fsl/qixis_ctrl.c
new file mode 100644
index 000000000000..b94649fb9726
--- /dev/null
+++ b/drivers/soc/fsl/qixis_ctrl.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/* Freescale QIXIS system controller driver.
+ *
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fsl/qixis_ctrl.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap *qixis_regmap;
+
+static struct regmap_config qixis_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int fsl_qixis_i2c_probe(struct i2c_client *client)
+{
+ struct platform_device *pdev;
+ struct device_node *child;
+ u32 qver;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EOPNOTSUPP;
+
+ qixis_regmap = regmap_init_i2c(client, &qixis_regmap_config);
+
+ /* create platform device for each of the child node of FPGA node */
+ for_each_child_of_node(client->dev.of_node, child) {
+ pdev = of_platform_device_create(child, NULL, &client->dev);
+ };
+
+ regmap_read(qixis_regmap, offsetof(struct fsl_qixis_regs, qixis_ver),
+ &qver);
+
+ pr_info("Freescale QIXIS Version: 0x%08x\n", qver);
+
+ return 0;
+}
+
+static int fsl_qixis_i2c_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct of_device_id fsl_qixis_of_match[] = {
+ { .compatible = "fsl,fpga-qixis-i2c" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_qixis_of_match);
+
+static struct i2c_driver fsl_qixis_i2c_driver = {
+ .driver = {
+ .name = "qixis_ctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(fsl_qixis_of_match),
+ },
+ .probe_new = fsl_qixis_i2c_probe,
+ .remove = fsl_qixis_i2c_remove,
+};
+module_i2c_driver(fsl_qixis_i2c_driver);
+
+MODULE_AUTHOR("Wang Dongsheng <dongsheng.wang@freescale.com>");
+MODULE_DESCRIPTION("Freescale QIXIS system controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/fsl/qixis_ctrl.h b/include/linux/fsl/qixis_ctrl.h
new file mode 100644
index 000000000000..00e80ef21adc
--- /dev/null
+++ b/include/linux/fsl/qixis_ctrl.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Definitions for Freescale QIXIS system controller.
+ *
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+#ifndef _FSL_QIXIS_CTRL_H_
+#define _FSL_QIXIS_CTRL_H_
+
+/* QIXIS MAP */
+struct fsl_qixis_regs {
+ u8 id; /* Identification Registers */
+ u8 version; /* Version Register */
+ u8 qixis_ver; /* QIXIS Version Register */
+ u8 reserved1[0x1f];
+};
+
+#endif
--
2.17.1
next prev parent reply other threads:[~2018-10-05 5:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 8:55 [PATCH 0/2] add i2c controlled qixis driver Pankaj Bansal
2018-10-05 8:55 ` [PATCH 1/2] dt-bindings: soc: fsl: Document Qixis FPGA usage Pankaj Bansal
2018-10-05 8:55 ` Pankaj Bansal [this message]
2018-12-06 0:12 ` [PATCH 2/2] fsl: add i2c controlled qixis driver Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181005085505.29024-3-pankaj.bansal@nxp.com \
--to=pankaj.bansal@nxp.com \
--cc=alexandru.marginean@nxp.com \
--cc=dongsheng.wang@freescale.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).