From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Kate Stewart <kstewart@linuxfoundation.org>,
Michal Hocko <mhocko@suse.com>,
David Hildenbrand <david@redhat.com>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
linux-mm@kvack.org, Paul Mackerras <paulus@samba.org>,
"K. Y. Srinivasan" <kys@microsoft.com>,
Dan Williams <dan.j.williams@intel.com>,
Sasha Levin <sashal@kernel.org>,
Michael Neuling <mikey@neuling.org>,
Stephen Hemminger <sthemmin@microsoft.com>,
Jonathan Corbet <corbet@lwn.net>,
linux-acpi@vger.kernel.org,
Nathan Fontenot <nfont@linux.vnet.ibm.com>,
Len Brown <lenb@kernel.org>,
Pavel Tatashin <pavel.tatashin@microsoft.com>,
Haiyang Zhang <haiyangz@microsoft.com>,
linuxppc-dev@lists.ozlabs.org,
YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Andrew Morton <akpm@linux-foundation.org>,
Vlastimil Babka <vbabka@suse.cz>, Juergen Gross <jgross@suse.com>,
Mathieu Malaterre <malat@debian.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
John Allen <jallen@linux.vnet.ibm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Philippe Ombredanne <pombredanne@nexb.com>,
Martin Schwidefsky <schwidefsky@de.ibm.com>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: [PATCH AUTOSEL 4.9 03/17] mm/memory_hotplug: make add_memory() take the device_hotplug_lock
Date: Tue, 13 Nov 2018 00:52:09 -0500 [thread overview]
Message-ID: <20181113055223.79060-3-sashal@kernel.org> (raw)
In-Reply-To: <20181113055223.79060-1-sashal@kernel.org>
From: David Hildenbrand <david@redhat.com>
[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock"). add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.
Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.
The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.
Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module. If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).
Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../platforms/pseries/hotplug-memory.c | 2 +-
drivers/acpi/acpi_memhotplug.c | 2 +-
drivers/base/memory.c | 9 ++++++--
drivers/xen/balloon.c | 3 +++
include/linux/memory_hotplug.h | 1 +
mm/memory_hotplug.c | 22 ++++++++++++++++---
6 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c0a0947f43bb..656bbbd731d0 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -616,7 +616,7 @@ static int dlpar_add_lmb(struct of_drconf_cell *lmb)
nid = memory_add_physaddr_to_nid(lmb->base_addr);
/* Add the memory */
- rc = add_memory(nid, lmb->base_addr, block_sz);
+ rc = __add_memory(nid, lmb->base_addr, block_sz);
if (rc) {
dlpar_remove_device_tree_lmb(lmb);
dlpar_release_drc(lmb->drc_index);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 6b0d3ef7309c..2ccfbb61ca89 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -228,7 +228,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
- result = add_memory(node, info->start_addr, info->length);
+ result = __add_memory(node, info->start_addr, info->length);
/*
* If the memory block has been used by the kernel, add_memory()
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index c5cdd190b781..9f96f1b43c15 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -500,15 +500,20 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1))
return -EINVAL;
+ ret = lock_device_hotplug_sysfs();
+ if (ret)
+ goto out;
+
nid = memory_add_physaddr_to_nid(phys_addr);
- ret = add_memory(nid, phys_addr,
- MIN_MEMORY_BLOCK_SIZE * sections_per_block);
+ ret = __add_memory(nid, phys_addr,
+ MIN_MEMORY_BLOCK_SIZE * sections_per_block);
if (ret)
goto out;
ret = count;
out:
+ unlock_device_hotplug();
return ret;
}
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index e4db19e88ab1..a10c64fee9ac 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -358,7 +358,10 @@ static enum bp_state reserve_additional_memory(void)
* callers drop the mutex before trying again.
*/
mutex_unlock(&balloon_mutex);
+ /* add_memory_resource() requires the device_hotplug lock */
+ lock_device_hotplug();
rc = add_memory_resource(nid, resource, memhp_auto_online);
+ unlock_device_hotplug();
mutex_lock(&balloon_mutex);
if (rc) {
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 134a2f69c21a..9469eef30095 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -272,6 +272,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
void *arg, int (*func)(struct memory_block *, void *));
+extern int __add_memory(int nid, u64 start, u64 size);
extern int add_memory(int nid, u64 start, u64 size);
extern int add_memory_resource(int nid, struct resource *resource, bool online);
extern int zone_for_memory(int nid, u64 start, u64 size, int zone_default,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0f962cc3f1bf..1e8ba77f642d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1339,7 +1339,12 @@ static int online_memory_block(struct memory_block *mem, void *arg)
return memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
}
-/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+/*
+ * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
+ * and online/offline operations (triggered e.g. by sysfs).
+ *
+ * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG
+ */
int __ref add_memory_resource(int nid, struct resource *res, bool online)
{
u64 start, size;
@@ -1417,9 +1422,9 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
mem_hotplug_done();
return ret;
}
-EXPORT_SYMBOL_GPL(add_memory_resource);
-int __ref add_memory(int nid, u64 start, u64 size)
+/* requires device_hotplug_lock, see add_memory_resource() */
+int __ref __add_memory(int nid, u64 start, u64 size)
{
struct resource *res;
int ret;
@@ -1433,6 +1438,17 @@ int __ref add_memory(int nid, u64 start, u64 size)
release_memory_resource(res);
return ret;
}
+
+int add_memory(int nid, u64 start, u64 size)
+{
+ int rc;
+
+ lock_device_hotplug();
+ rc = __add_memory(nid, start, size);
+ unlock_device_hotplug();
+
+ return rc;
+}
EXPORT_SYMBOL_GPL(add_memory);
#ifdef CONFIG_MEMORY_HOTREMOVE
--
2.17.1
parent reply other threads:[~2018-11-13 6:05 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20181113055223.79060-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113055223.79060-3-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=boris.ostrovsky@oracle.com \
--cc=corbet@lwn.net \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=haiyangz@microsoft.com \
--cc=heiko.carstens@de.ibm.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=jallen@linux.vnet.ibm.com \
--cc=jgross@suse.com \
--cc=kstewart@linuxfoundation.org \
--cc=kys@microsoft.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=malat@debian.org \
--cc=mhocko@suse.com \
--cc=mikey@neuling.org \
--cc=nfont@linux.vnet.ibm.com \
--cc=paulus@samba.org \
--cc=pavel.tatashin@microsoft.com \
--cc=pombredanne@nexb.com \
--cc=rjw@rjwysocki.net \
--cc=schwidefsky@de.ibm.com \
--cc=stable@vger.kernel.org \
--cc=sthemmin@microsoft.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=vbabka@suse.cz \
--cc=yasu.isimatu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).