[PATCH AUTOSEL 3.18 07/61] powerpc/pseries: add of_node_put() in dlpar_detach_node()

[PATCH AUTOSEL 3.18 07/61] powerpc/pseries: add of_node_put() in dlpar_detach_node()

[Sasha Levin]

From: Frank Rowand <frank.rowand@sony.com>

[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]

The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs().  This results in a refcount imbalance
for nodes attached with dlpar_attach_node().  The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:

   dlpar_attach_node()
      of_attach_node()
         __of_attach_node_sysfs()

For more detailed description of the node refcount, see
commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").

Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 80d175dca68e..85bd29475987 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -299,6 +299,8 @@ int dlpar_detach_node(struct device_node *dn)
 	if (rc)
 		return rc;
 
+	of_node_put(dn);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 36/61] powerpc/uaccess: fix warning/error with access_ok()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]

With the following piece of code, the following compilation warning
is encountered:

	if (_IOC_DIR(ioc) != _IOC_NONE) {
		int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

		if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {

drivers/platform/test/dev.c: In function 'my_ioctl':
drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
   int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;

This patch fixes it by referencing 'type' in the macro allthough
doing nothing with it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 46c486599645..1bb8cc3fbbf1 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -59,7 +59,7 @@
 #endif
 
 #define access_ok(type, addr, size)		\
-	(__chk_user_ptr(addr),			\
+	(__chk_user_ptr(addr), (void)(type),		\
 	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 3.18 58/61] block/swim3: Fix -EBUSY error when re-opening device after unmount

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]

When the block device is opened with FMODE_EXCL, ref_count is set to -1.
This value doesn't get reset when the device is closed which means the
device cannot be opened again. Fix this by checking for refcount <= 0
in the release method.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/swim3.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 523ee8fd4c15..eaf1336623aa 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1027,7 +1027,11 @@ static void floppy_release(struct gendisk *disk, fmode_t mode)
 	struct swim3 __iomem *sw = fs->swim3;
 
 	mutex_lock(&swim3_mutex);
-	if (fs->ref_count > 0 && --fs->ref_count == 0) {
+	if (fs->ref_count > 0)
+		--fs->ref_count;
+	else if (fs->ref_count == -1)
+		fs->ref_count = 0;
+	if (fs->ref_count == 0) {
 		swim3_action(fs, MOTOR_OFF);
 		out_8(&sw->control_bic, 0xff);
 		swim3_select(fs, RELAX);
-- 
2.19.1