From: Pankaj Bansal <pankaj.bansal@nxp.com>
To: Leo Li <leoyang.li@nxp.com>
Cc: Pankaj Bansal <pankaj.bansal@nxp.com>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
Varun Sethi <V.Sethi@nxp.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 0/2] add i2c controlled qixis driver
Date: Wed, 30 Jan 2019 11:34:27 +0000 [thread overview]
Message-ID: <20190130165916.8628-1-pankaj.bansal@nxp.com> (raw)
FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis
driver which is basically an i2c client driver to control FPGA.
This driver is essential to control MDIO mux multiplexing.
This driver is dependent on below patches:
https://www.mail-archive.com/netdev@vger.kernel.org/msg281274.html
V1 of this series:
https://patchwork.kernel.org/cover/10627297/
Cc: Varun Sethi <V.Sethi@nxp.com>
Pankaj Bansal (2):
dt-bindings: soc: fsl: Document Qixis FPGA usage
fsl: add i2c controlled qixis driver
.../bindings/soc/fsl/qixis_ctrl.txt | 33 +++++
drivers/soc/fsl/Kconfig | 8 ++
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/qixis_ctrl.c | 121 ++++++++++++++++++
4 files changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/fsl/qixis_ctrl.txt
create mode 100644 drivers/soc/fsl/qixis_ctrl.c
--
2.17.1
next reply other threads:[~2019-01-30 11:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 11:34 Pankaj Bansal [this message]
2019-01-30 11:34 ` [PATCH v2 1/2] dt-bindings: soc: fsl: Document Qixis FPGA usage Pankaj Bansal
2019-01-30 11:34 ` [PATCH v2 2/2] fsl: add i2c controlled qixis driver Pankaj Bansal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190130165916.8628-1-pankaj.bansal@nxp.com \
--to=pankaj.bansal@nxp.com \
--cc=V.Sethi@nxp.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).