From: Sam Bobroff <sbobroff@linux.ibm.com>
To: "Oliver O'Halloran" <oohall@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2 3/7] powerpc/eeh_cache: Add a way to dump the EEH address cache
Date: Fri, 15 Feb 2019 16:12:35 +1100 [thread overview]
Message-ID: <20190215051234.GC8338@tungsten.ozlabs.ibm.com> (raw)
In-Reply-To: <20190215004817.19961-3-oohall@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3235 bytes --]
On Fri, Feb 15, 2019 at 11:48:13AM +1100, Oliver O'Halloran wrote:
> Adds a debugfs file that can be read to view the contents of the EEH
> address cache. This is pretty similar to the existing
> eeh_addr_cache_print() function, but that function is intended to debug
> issues inside of the kernel since it's #ifdef`ed out by default, and writes
> into the kernel log.
>
> Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
> ---
> v2: Added missing #endif
> Replaced while loop with a for
> ---
> arch/powerpc/include/asm/eeh.h | 3 +++
> arch/powerpc/kernel/eeh.c | 1 +
> arch/powerpc/kernel/eeh_cache.c | 30 ++++++++++++++++++++++++++----
> 3 files changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
> index 2daecd677855..478f199d5663 100644
> --- a/arch/powerpc/include/asm/eeh.h
> +++ b/arch/powerpc/include/asm/eeh.h
> @@ -460,6 +460,9 @@ static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
> eeh_check_failure(addr);
> }
>
> +
> +void eeh_cache_debugfs_init(void);
> +
> #endif /* CONFIG_PPC64 */
> #endif /* __KERNEL__ */
> #endif /* _POWERPC_EEH_H */
> diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
> index d021f5abeec5..82d22c671c0e 100644
> --- a/arch/powerpc/kernel/eeh.c
> +++ b/arch/powerpc/kernel/eeh.c
> @@ -1810,6 +1810,7 @@ static int __init eeh_init_proc(void)
> &eeh_enable_dbgfs_ops);
> debugfs_create_u32("eeh_max_freezes", 0600,
> powerpc_debugfs_root, &eeh_max_freezes);
> + eeh_cache_debugfs_init();
> #endif
> }
>
> diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
> index b2c320e0fcef..5c5697cced41 100644
> --- a/arch/powerpc/kernel/eeh_cache.c
> +++ b/arch/powerpc/kernel/eeh_cache.c
> @@ -26,6 +26,7 @@
> #include <linux/spinlock.h>
> #include <linux/atomic.h>
> #include <asm/pci-bridge.h>
> +#include <asm/debugfs.h>
> #include <asm/ppc-pci.h>
>
>
> @@ -298,9 +299,30 @@ void eeh_addr_cache_build(void)
> eeh_addr_cache_insert_dev(dev);
> eeh_sysfs_add_device(dev);
> }
> +}
>
> -#ifdef DEBUG
> - /* Verify tree built up above, echo back the list of addrs. */
> - eeh_addr_cache_print(&pci_io_addr_cache_root);
> -#endif
> +static int eeh_addr_cache_show(struct seq_file *s, void *v)
> +{
> + struct pci_io_addr_range *piar;
> + struct rb_node *n;
> +
> + spin_lock(&pci_io_addr_cache_root.piar_lock);
> + for (n = rb_first(&pci_io_addr_cache_root.rb_root); n; n = rb_next(n)) {
> + piar = rb_entry(n, struct pci_io_addr_range, rb_node);
> +
> + seq_printf(s, "%s addr range [%pap-%pap]: %s\n",
> + (piar->flags & IORESOURCE_IO) ? "i/o" : "mem",
> + &piar->addr_lo, &piar->addr_hi, pci_name(piar->pcidev));
> + }
> + spin_unlock(&pci_io_addr_cache_root.piar_lock);
> +
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(eeh_addr_cache);
> +
> +void eeh_cache_debugfs_init(void)
> +{
> + debugfs_create_file_unsafe("eeh_address_cache", 0400,
> + powerpc_debugfs_root, NULL,
> + &eeh_addr_cache_fops);
> }
> --
> 2.20.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2019-02-15 5:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 0:48 [PATCH v2 1/7] powerpc/eeh: Use debugfs_create_u32 for eeh_max_freezes Oliver O'Halloran
2019-02-15 0:48 ` [PATCH v2 2/7] powerpc/eeh_cache: Add pr_debug() prints for insert/remove Oliver O'Halloran
2019-02-15 5:11 ` Sam Bobroff
2019-02-15 0:48 ` [PATCH v2 3/7] powerpc/eeh_cache: Add a way to dump the EEH address cache Oliver O'Halloran
2019-02-15 5:12 ` Sam Bobroff [this message]
2019-02-15 0:48 ` [PATCH v2 4/7] powerpc/eeh_cache: Bump log level of eeh_addr_cache_print() Oliver O'Halloran
2019-02-15 5:12 ` Sam Bobroff
2019-02-15 0:48 ` [PATCH v2 5/7] powerpc/pci: Add pci_find_controller_for_domain() Oliver O'Halloran
2019-02-15 5:13 ` Sam Bobroff
2019-02-15 0:48 ` [PATCH v2 6/7] powerpc/eeh: Allow disabling recovery Oliver O'Halloran
2019-02-15 5:58 ` Sam Bobroff
2019-02-17 23:19 ` Oliver
2019-02-15 0:48 ` [PATCH v2 7/7] powerpc/eeh: Add eeh_force_recover to debugfs Oliver O'Halloran
2019-02-15 5:10 ` [PATCH v2 1/7] powerpc/eeh: Use debugfs_create_u32 for eeh_max_freezes Sam Bobroff
2019-02-22 9:47 ` [v2,1/7] " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190215051234.GC8338@tungsten.ozlabs.ibm.com \
--to=sbobroff@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=oohall@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).