From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Jonathan Cameron <jic23@kernel.org>,
linux-pwm@vger.kernel.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Daniel Lezcano <daniel.lezcano@linaro.org>,
William Breathitt Gray <vilhelm.gray@gmail.com>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
linux-arm-kernel@lists.infradead.org,
Thomas Gleixner <tglx@linutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Esben Haabendal <esben@haabendal.dk>
Subject: Re: [PATCH v2 5/7] counter: add FlexTimer Module Quadrature decoder counter driver
Date: Mon, 11 Mar 2019 12:24:04 +0000 [thread overview]
Message-ID: <20190311122404.0000546f@huawei.com> (raw)
In-Reply-To: <20190306111208.7454-6-patrick.havelange@essensium.com>
On Wed, 6 Mar 2019 12:12:06 +0100
Patrick Havelange <patrick.havelange@essensium.com> wrote:
> This driver exposes the counter for the quadrature decoder of the
> FlexTimer Module, present in the LS1021A soc.
>
> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
A few really trivial bits inline to add to William's feedback.
Otherwise I'm happy enough,
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> Changes v2
> - Rebased on new counter subsystem
> - Cleaned up included headers
> - Use devm_ioremap()
> - Correct order of devm_ and unmanaged resources
> ---
> drivers/counter/Kconfig | 9 +
> drivers/counter/Makefile | 1 +
> drivers/counter/ftm-quaddec.c | 356 ++++++++++++++++++++++++++++++++++
> 3 files changed, 366 insertions(+)
> create mode 100644 drivers/counter/ftm-quaddec.c
>
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 87c491a19c63..233ac305d878 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -48,4 +48,13 @@ config STM32_LPTIMER_CNT
> To compile this driver as a module, choose M here: the
> module will be called stm32-lptimer-cnt.
>
> +config FTM_QUADDEC
> + tristate "Flex Timer Module Quadrature decoder driver"
> + help
> + Select this option to enable the Flex Timer Quadrature decoder
> + driver.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ftm-quaddec.
> +
> endif # COUNTER
> diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
> index 5589976d37f8..0c9e622a6bea 100644
> --- a/drivers/counter/Makefile
> +++ b/drivers/counter/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_COUNTER) += counter.o
> obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
> obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o
> obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o
> +obj-$(CONFIG_FTM_QUADDEC) += ftm-quaddec.o
> diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
> new file mode 100644
> index 000000000000..1bc9e075a386
> --- /dev/null
> +++ b/drivers/counter/ftm-quaddec.c
> @@ -0,0 +1,356 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Flex Timer Module Quadrature decoder
> + *
> + * This module implements a driver for decoding the FTM quadrature
> + * of ex. a LS1021A
> + */
> +
> +#include <linux/fsl/ftm.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/mutex.h>
> +#include <linux/counter.h>
> +
> +struct ftm_quaddec {
> + struct counter_device counter;
> + struct platform_device *pdev;
> + void __iomem *ftm_base;
> + bool big_endian;
> + struct mutex ftm_quaddec_mutex;
> +};
> +
> +static void ftm_read(struct ftm_quaddec *ftm, uint32_t offset, uint32_t *data)
> +{
> + if (ftm->big_endian)
> + *data = ioread32be(ftm->ftm_base + offset);
> + else
> + *data = ioread32(ftm->ftm_base + offset);
> +}
> +
> +static void ftm_write(struct ftm_quaddec *ftm, uint32_t offset, uint32_t data)
> +{
> + if (ftm->big_endian)
> + iowrite32be(data, ftm->ftm_base + offset);
> + else
> + iowrite32(data, ftm->ftm_base + offset);
> +}
> +
> +/*
> + * take mutex
> + * call ftm_clear_write_protection
> + * update settings
> + * call ftm_set_write_protection
> + * release mutex
> + */
> +static void ftm_clear_write_protection(struct ftm_quaddec *ftm)
> +{
> + uint32_t flag;
> +
> + /* First see if it is enabled */
> + ftm_read(ftm, FTM_FMS, &flag);
> +
> + if (flag & FTM_FMS_WPEN) {
> + ftm_read(ftm, FTM_MODE, &flag);
> + ftm_write(ftm, FTM_MODE, flag | FTM_MODE_WPDIS);
> + }
> +}
> +
> +static void ftm_set_write_protection(struct ftm_quaddec *ftm)
> +{
> + ftm_write(ftm, FTM_FMS, FTM_FMS_WPEN);
> +}
> +
> +static void ftm_reset_counter(struct ftm_quaddec *ftm)
> +{
> + /* Reset hardware counter to CNTIN */
> + ftm_write(ftm, FTM_CNT, 0x0);
> +}
> +
> +static void ftm_quaddec_init(struct ftm_quaddec *ftm)
> +{
> + ftm_clear_write_protection(ftm);
> +
> + /*
> + * Do not write in the region from the CNTIN register through the
> + * PWMLOAD register when FTMEN = 0.
> + */
> + ftm_write(ftm, FTM_MODE, FTM_MODE_FTMEN);
> + ftm_write(ftm, FTM_CNTIN, 0x0000);
> + ftm_write(ftm, FTM_MOD, 0xffff);
> + ftm_write(ftm, FTM_CNT, 0x0);
> + ftm_write(ftm, FTM_SC, FTM_SC_PS_1);
> +
> + /* Select quad mode */
> + ftm_write(ftm, FTM_QDCTRL, FTM_QDCTRL_QUADEN);
> +
> + /* Unused features and reset to default section */
> + ftm_write(ftm, FTM_POL, 0x0);
> + ftm_write(ftm, FTM_FLTCTRL, 0x0);
> + ftm_write(ftm, FTM_SYNCONF, 0x0);
> + ftm_write(ftm, FTM_SYNC, 0xffff);
> +
> + /* Lock the FTM */
> + ftm_set_write_protection(ftm);
> +}
> +
> +static void ftm_quaddec_disable(struct ftm_quaddec *ftm)
> +{
> + ftm_write(ftm, FTM_MODE, 0);
> +}
> +
> +static int ftm_quaddec_get_prescaler(struct counter_device *counter,
> + struct counter_count *count,
> + size_t *cnt_mode)
> +{
> + struct ftm_quaddec *ftm = counter->priv;
> + uint32_t scflags;
> +
> + ftm_read(ftm, FTM_SC, &scflags);
> +
> + *cnt_mode = scflags & FTM_SC_PS_MASK;
FIELD_GET and FIELD_PREP are a tidy way of doing these sorts of
accesses. Helpfully they also save a reviewer having to sanity
check that the offset is 0 as it is here.
> +
> + return 0;
> +}
> +
> +static int ftm_quaddec_set_prescaler(struct counter_device *counter,
> + struct counter_count *count,
> + size_t cnt_mode)
> +{
> + struct ftm_quaddec *ftm = counter->priv;
> +
> + uint32_t scflags;
> +
> + mutex_lock(&ftm->ftm_quaddec_mutex);
> +
> + ftm_read(ftm, FTM_SC, &scflags);
> +
> + scflags &= ~FTM_SC_PS_MASK;
> + cnt_mode &= FTM_SC_PS_MASK; /*just to be 100% sure*/
nitpick: Comment syntax is /* just to be 100% sure */
> +
> + scflags |= cnt_mode;
> +
> + /* Write */
> + ftm_clear_write_protection(ftm);
> + ftm_write(ftm, FTM_SC, scflags);
> + ftm_set_write_protection(ftm);
> +
> + /* Also resets the counter as it is undefined anyway now */
> + ftm_reset_counter(ftm);
> +
> + mutex_unlock(&ftm->ftm_quaddec_mutex);
> + return 0;
> +}
> +
> +static const char * const ftm_quaddec_prescaler[] = {
> + "1", "2", "4", "8", "16", "32", "64", "128"
> +};
> +
> +static struct counter_count_enum_ext ftm_quaddec_prescaler_enum = {
> + .items = ftm_quaddec_prescaler,
> + .num_items = ARRAY_SIZE(ftm_quaddec_prescaler),
> + .get = ftm_quaddec_get_prescaler,
> + .set = ftm_quaddec_set_prescaler
> +};
> +
> +enum ftm_quaddec_synapse_action {
> + FTM_QUADDEC_SYNAPSE_ACTION_BOTH_EDGES,
> +};
> +
> +static enum counter_synapse_action ftm_quaddec_synapse_actions[] = {
> + [FTM_QUADDEC_SYNAPSE_ACTION_BOTH_EDGES] =
> + COUNTER_SYNAPSE_ACTION_BOTH_EDGES
> +};
> +
> +enum ftm_quaddec_count_function {
> + FTM_QUADDEC_COUNT_ENCODER_MODE_1,
> +};
> +
> +static const enum counter_count_function ftm_quaddec_count_functions[] = {
> + [FTM_QUADDEC_COUNT_ENCODER_MODE_1] =
> + COUNTER_COUNT_FUNCTION_QUADRATURE_X4
> +};
> +
> +static int ftm_quaddec_count_read(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_count_read_value *val)
> +{
> + struct ftm_quaddec *const ftm = counter->priv;
> + uint32_t cntval;
> +
> + ftm_read(ftm, FTM_CNT, &cntval);
> +
> + counter_count_read_value_set(val, COUNTER_COUNT_POSITION, &cntval);
> +
> + return 0;
> +}
> +
> +static int ftm_quaddec_count_write(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_count_write_value *val)
> +{
> + struct ftm_quaddec *const ftm = counter->priv;
> + u32 cnt;
> + int err;
> +
> + err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
> + if (err)
> + return err;
> +
> + if (cnt != 0) {
> + dev_warn(&ftm->pdev->dev, "Can only accept '0' as new counter value\n");
> + return -EINVAL;
> + }
> +
> + ftm_reset_counter(ftm);
> +
> + return 0;
> +}
> +
> +static int ftm_quaddec_count_function_get(struct counter_device *counter,
> + struct counter_count *count,
> + size_t *function)
> +{
> + *function = FTM_QUADDEC_COUNT_ENCODER_MODE_1;
> +
> + return 0;
> +}
> +
> +static int ftm_quaddec_action_get(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_synapse *synapse,
> + size_t *action)
> +{
> + *action = FTM_QUADDEC_SYNAPSE_ACTION_BOTH_EDGES;
> +
> + return 0;
> +}
> +
> +static const struct counter_ops ftm_quaddec_cnt_ops = {
> + .count_read = ftm_quaddec_count_read,
> + .count_write = ftm_quaddec_count_write,
> + .function_get = ftm_quaddec_count_function_get,
> + .action_get = ftm_quaddec_action_get,
> +};
> +
> +static struct counter_signal ftm_quaddec_signals[] = {
> + {
> + .id = 0,
> + .name = "Channel 1 Quadrature A"
> + },
> + {
> + .id = 1,
> + .name = "Channel 1 Quadrature B"
> + }
> +};
> +
> +static struct counter_synapse ftm_quaddec_count_synapses[] = {
> + {
> + .actions_list = ftm_quaddec_synapse_actions,
> + .num_actions = ARRAY_SIZE(ftm_quaddec_synapse_actions),
> + .signal = &ftm_quaddec_signals[0]
> + },
> + {
> + .actions_list = ftm_quaddec_synapse_actions,
> + .num_actions = ARRAY_SIZE(ftm_quaddec_synapse_actions),
> + .signal = &ftm_quaddec_signals[1]
> + }
> +};
> +
> +static const struct counter_count_ext ftm_quaddec_count_ext[] = {
> + COUNTER_COUNT_ENUM("prescaler", &ftm_quaddec_prescaler_enum),
> + COUNTER_COUNT_ENUM_AVAILABLE("prescaler", &ftm_quaddec_prescaler_enum),
> +};
> +
> +static struct counter_count ftm_quaddec_counts = {
> + .id = 0,
> + .name = "Channel 1 Count",
> + .functions_list = ftm_quaddec_count_functions,
> + .num_functions = ARRAY_SIZE(ftm_quaddec_count_functions),
> + .synapses = ftm_quaddec_count_synapses,
> + .num_synapses = ARRAY_SIZE(ftm_quaddec_count_synapses),
> + .ext = ftm_quaddec_count_ext,
> + .num_ext = ARRAY_SIZE(ftm_quaddec_count_ext)
> +};
> +
> +static int ftm_quaddec_probe(struct platform_device *pdev)
> +{
> + struct ftm_quaddec *ftm;
> +
> + struct device_node *node = pdev->dev.of_node;
> + struct resource *io;
> + int ret;
> +
> + ftm = devm_kzalloc(&pdev->dev, sizeof(*ftm), GFP_KERNEL);
> + if (!ftm)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, ftm);
> +
> + io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!io) {
> + dev_err(&pdev->dev, "Failed to get memory region\n");
> + return -ENODEV;
> + }
> +
> + ftm->pdev = pdev;
> + ftm->big_endian = of_property_read_bool(node, "big-endian");
> + ftm->ftm_base = devm_ioremap(&pdev->dev, io->start, resource_size(io));
> +
> + if (!ftm->ftm_base) {
> + dev_err(&pdev->dev, "Failed to map memory region\n");
> + return -EINVAL;
> + }
> + ftm->counter.name = dev_name(&pdev->dev);
> + ftm->counter.parent = &pdev->dev;
> + ftm->counter.ops = &ftm_quaddec_cnt_ops;
> + ftm->counter.counts = &ftm_quaddec_counts;
> + ftm->counter.num_counts = 1;
> + ftm->counter.signals = ftm_quaddec_signals;
> + ftm->counter.num_signals = ARRAY_SIZE(ftm_quaddec_signals);
> + ftm->counter.priv = ftm;
> +
> + mutex_init(&ftm->ftm_quaddec_mutex);
> +
> + ftm_quaddec_init(ftm);
> +
> + ret = counter_register(&ftm->counter);
> + if (ret)
> + ftm_quaddec_disable(ftm);
> +
> + return ret;
> +}
> +
> +static int ftm_quaddec_remove(struct platform_device *pdev)
> +{
> + struct ftm_quaddec *ftm = platform_get_drvdata(pdev);
> +
> + counter_unregister(&ftm->counter);
> +
> + ftm_quaddec_disable(ftm);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ftm_quaddec_match[] = {
> + { .compatible = "fsl,ftm-quaddec" },
> + {},
> +};
> +
> +static struct platform_driver ftm_quaddec_driver = {
> + .driver = {
> + .name = "ftm-quaddec",
> + .owner = THIS_MODULE,
No need to set this, the call to __platform_driver_register
that comes from the module_platform_driver macro below
will deal with this for you.
> + .of_match_table = ftm_quaddec_match,
> + },
> + .probe = ftm_quaddec_probe,
> + .remove = ftm_quaddec_remove,
> +};
> +
> +module_platform_driver(ftm_quaddec_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com");
> +MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com");
next prev parent reply other threads:[~2019-03-11 12:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 11:12 [PATCH v2 0/7] FlexTimer Module Quadrature decoder counter Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 1/7] include/fsl: add common FlexTimer #defines in a separate header Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 2/7] drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines Patrick Havelange
2019-03-06 11:12 ` [PATCH v2 3/7] drivers/clocksource: timer-fsl-ftm: " Patrick Havelange
2019-04-11 16:40 ` Daniel Lezcano
2019-03-06 11:12 ` [PATCH v2 4/7] dt-bindings: counter: ftm-quaddec Patrick Havelange
2019-03-12 19:09 ` Rob Herring
2019-03-16 14:21 ` Jonathan Cameron
2019-03-26 15:43 ` Arnout Vandecappelle
2019-03-26 16:06 ` Rob Herring
2019-03-06 11:12 ` [PATCH v2 5/7] counter: add FlexTimer Module Quadrature decoder counter driver Patrick Havelange
2019-03-07 11:32 ` William Breathitt Gray
2019-03-11 11:22 ` Patrick Havelange
2019-03-11 12:24 ` Jonathan Cameron [this message]
2019-03-06 11:12 ` [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation Patrick Havelange
2019-03-07 11:42 ` William Breathitt Gray
2019-03-11 12:36 ` Jonathan Cameron
2019-03-06 11:12 ` [PATCH v2 7/7] LS1021A: dtsi: add ftm quad decoder entries Patrick Havelange
2019-03-07 12:03 ` [PATCH v2 0/7] FlexTimer Module Quadrature decoder counter William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311122404.0000546f@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=esben@haabendal.dk \
--cc=jic23@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=patrick.havelange@essensium.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).