LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: S.j. Wang <shengjiu.wang@nxp.com>
Cc: alsa-devel@alsa-project.org,
	"timur@kernel.org" <timur@kernel.org>,
	"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	"nicoleotsuka@gmail.com" <nicoleotsuka@gmail.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"festevam@gmail.com" <festevam@gmail.com>
Subject: Applied "ASoC: fsl_esai: Support synchronous mode" to the asoc tree
Date: Fri,  5 Apr 2019 10:26:13 +0700 (+07)	[thread overview]
Message-ID: <20190405032613.6CFE7441D3C@finisterre.ee.mobilebroadband> (raw)
In-Reply-To: <a24d5493c392d39aefc6239e3dd97f9dd5fff1a1.1554370750.git.shengjiu.wang@nxp.com>

The patch

   ASoC: fsl_esai: Support synchronous mode

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 1997ee89f36da906efb8e700f1d08368c73883be Mon Sep 17 00:00:00 2001
From: "S.j. Wang" <shengjiu.wang@nxp.com>
Date: Thu, 4 Apr 2019 09:40:56 +0000
Subject: [PATCH] ASoC: fsl_esai: Support synchronous mode

In ESAI synchronous mode, the clock is generated by Tx, So
we should always set registers of Tx which relate with the
bit clock and frame clock generation (TCCR, TCR, ECR), even
there is only Rx is working.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/fsl/fsl_esai.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 3623aa9a6f2e..c7410bbfd2af 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -218,7 +218,7 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
 {
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
 	struct clk *clksrc = esai_priv->extalclk;
-	bool tx = clk_id <= ESAI_HCKT_EXTAL;
+	bool tx = (clk_id <= ESAI_HCKT_EXTAL || esai_priv->synchronous);
 	bool in = dir == SND_SOC_CLOCK_IN;
 	u32 ratio, ecr = 0;
 	unsigned long clk_rate;
@@ -253,7 +253,7 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
 		ecr |= ESAI_ECR_ETI;
 		/* fall through */
 	case ESAI_HCKR_EXTAL:
-		ecr |= ESAI_ECR_ERI;
+		ecr |= esai_priv->synchronous ? ESAI_ECR_ETI : ESAI_ECR_ERI;
 		break;
 	default:
 		return -EINVAL;
@@ -537,10 +537,18 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 
 	bclk = params_rate(params) * slot_width * esai_priv->slots;
 
-	ret = fsl_esai_set_bclk(dai, tx, bclk);
+	ret = fsl_esai_set_bclk(dai, esai_priv->synchronous || tx, bclk);
 	if (ret)
 		return ret;
 
+	mask = ESAI_xCR_xSWS_MASK;
+	val = ESAI_xCR_xSWS(slot_width, width);
+
+	regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);
+	/* Recording in synchronous mode needs to set TCR also */
+	if (!tx && esai_priv->synchronous)
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, val);
+
 	/* Use Normal mode to support monaural audio */
 	regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
 			   ESAI_xCR_xMOD_MASK, params_channels(params) > 1 ?
@@ -556,10 +564,9 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 
 	regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val);
 
-	mask = ESAI_xCR_xSWS_MASK | (tx ? ESAI_xCR_PADC : 0);
-	val = ESAI_xCR_xSWS(slot_width, width) | (tx ? ESAI_xCR_PADC : 0);
-
-	regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);
+	if (tx)
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+				ESAI_xCR_PADC, ESAI_xCR_PADC);
 
 	/* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */
 	regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
-- 
2.20.1


      reply	other threads:[~2019-04-05  3:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-04  9:40 [PATCH V3] ASoC: fsl_esai: Support synchronous mode S.j. Wang
2019-04-05  3:26 ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405032613.6CFE7441D3C@finisterre.ee.mobilebroadband \
    --to=broonie@kernel.org \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=festevam@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox