From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 31/44] powerpc/64s/exception: Expand EXCEPTION_PROLOG_COMMON_1 and 2 into caller
Date: Fri, 2 Aug 2019 20:56:56 +1000 [thread overview]
Message-ID: <20190802105709.27696-32-npiggin@gmail.com> (raw)
In-Reply-To: <20190802105709.27696-1-npiggin@gmail.com>
No generated code change except BUG line number constants.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 85 +++++++++++++---------------
1 file changed, 40 insertions(+), 45 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 6ea9a7694bb2..e1a5a5e8d4f7 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -390,49 +390,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
.endm
#endif
-#define EXCEPTION_PROLOG_COMMON_1() \
- std r9,_CCR(r1); /* save CR in stackframe */ \
- std r11,_NIP(r1); /* save SRR0 in stackframe */ \
- std r12,_MSR(r1); /* save SRR1 in stackframe */ \
- std r10,0(r1); /* make stack chain pointer */ \
- std r0,GPR0(r1); /* save r0 in stackframe */ \
- std r10,GPR1(r1); /* save r1 in stackframe */ \
-
-/* Save original regs values from save area to stack frame. */
-#define EXCEPTION_PROLOG_COMMON_2(area, trap) \
- ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
- ld r10,area+EX_R10(r13); \
- std r9,GPR9(r1); \
- std r10,GPR10(r1); \
- ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
- ld r10,area+EX_R12(r13); \
- ld r11,area+EX_R13(r13); \
- std r9,GPR11(r1); \
- std r10,GPR12(r1); \
- std r11,GPR13(r1); \
-BEGIN_FTR_SECTION_NESTED(66); \
- ld r10,area+EX_CFAR(r13); \
- std r10,ORIG_GPR3(r1); \
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
- GET_CTR(r10, area); \
- std r10,_CTR(r1); \
- std r2,GPR2(r1); /* save r2 in stackframe */ \
- SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
- SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
- mflr r9; /* Get LR, later save to stack */ \
- ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
- std r9,_LINK(r1); \
- lbz r10,PACAIRQSOFTMASK(r13); \
- mfspr r11,SPRN_XER; /* save XER in stackframe */ \
- std r10,SOFTE(r1); \
- std r11,_XER(r1); \
- li r9,(trap)+1; \
- std r9,_TRAP(r1); /* set trap number */ \
- li r10,0; \
- ld r11,exception_marker@toc(r2); \
- std r10,RESULT(r1); /* clear regs->result */ \
- std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
-
/*
* On entry r13 points to the paca, r9-r13 are saved in the paca,
* r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
@@ -452,7 +409,13 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
3:
.endif
- EXCEPTION_PROLOG_COMMON_1()
+
+ std r9,_CCR(r1) /* save CR in stackframe */
+ std r11,_NIP(r1) /* save SRR0 in stackframe */
+ std r12,_MSR(r1) /* save SRR1 in stackframe */
+ std r10,0(r1) /* make stack chain pointer */
+ std r0,GPR0(r1) /* save r0 in stackframe */
+ std r10,GPR1(r1) /* save r1 in stackframe */
.if \stack
.if \kaup
@@ -468,7 +431,39 @@ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
.endif
.endif
- EXCEPTION_PROLOG_COMMON_2(\area, \vec)
+ /* Save original regs values from save area to stack frame. */
+ ld r9,\area+EX_R9(r13) /* move r9, r10 to stackframe */
+ ld r10,\area+EX_R10(r13)
+ std r9,GPR9(r1)
+ std r10,GPR10(r1)
+ ld r9,\area+EX_R11(r13) /* move r11 - r13 to stackframe */
+ ld r10,\area+EX_R12(r13)
+ ld r11,\area+EX_R13(r13)
+ std r9,GPR11(r1)
+ std r10,GPR12(r1)
+ std r11,GPR13(r1)
+BEGIN_FTR_SECTION_NESTED(66)
+ ld r10,\area+EX_CFAR(r13)
+ std r10,ORIG_GPR3(r1)
+END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
+ GET_CTR(r10, \area)
+ std r10,_CTR(r1)
+ std r2,GPR2(r1) /* save r2 in stackframe */
+ SAVE_4GPRS(3, r1) /* save r3 - r6 in stackframe */
+ SAVE_2GPRS(7, r1) /* save r7, r8 in stackframe */
+ mflr r9 /* Get LR, later save to stack */
+ ld r2,PACATOC(r13) /* get kernel TOC into r2 */
+ std r9,_LINK(r1)
+ lbz r10,PACAIRQSOFTMASK(r13)
+ mfspr r11,SPRN_XER /* save XER in stackframe */
+ std r10,SOFTE(r1)
+ std r11,_XER(r1)
+ li r9,(\vec)+1
+ std r9,_TRAP(r1) /* set trap number */
+ li r10,0
+ ld r11,exception_marker@toc(r2)
+ std r10,RESULT(r1) /* clear regs->result */
+ std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */
.if \stack
ACCOUNT_STOLEN_TIME
--
2.22.0
next prev parent reply other threads:[~2019-08-02 12:13 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-02 10:56 [PATCH v2 00/44] powerpc/64s/exception: cleanup and macrofiy, Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 01/44] powerpc/64s/exception: machine check fwnmi remove HV case Nicholas Piggin
2019-09-02 3:29 ` Michael Ellerman
2019-08-02 10:56 ` [PATCH v2 02/44] powerpc/64s/exception: machine check remove bitrotted comment Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 03/44] powerpc/64s/exception: machine check fix KVM guest test Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 04/44] powerpc/64s/exception: machine check adjust RFI target Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 05/44] powerpc/64s/exception: machine check pseries should always run the early handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 06/44] powerpc/64s/exception: machine check remove machine_check_pSeries_0 branch Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 07/44] powerpc/64s/exception: machine check use correct cfar for late handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 08/44] powerpc/64s/powernv: machine check dump SLB contents Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 09/44] powerpc/64s/pseries: machine check convert to use common event code Nicholas Piggin
2019-08-08 5:01 ` kbuild test robot
2019-08-16 22:25 ` Michael Ellerman
2019-08-19 13:09 ` Nicholas Piggin
2019-08-08 5:50 ` kbuild test robot
2019-08-02 10:56 ` [PATCH v2 10/44] powerpc/64s/exception: machine check pseries should skip the late handler for kernel MCEs Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 11/44] powerpc/64s/exception: machine check restructure to reuse common macros Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 12/44] powerpc/64s/exception: machine check move tramp code Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 13/44] powerpc/64s/exception: simplify machine check early path Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 14/44] powerpc/64s/exception: machine check move unrecoverable handling out of line Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 15/44] powerpc/64s/exception: untangle early machine check handler branch Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 16/44] powerpc/64s/exception: machine check improve labels and comments Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 17/44] powerpc/64s/exception: Fix DAR load for handle_page_fault error case Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 18/44] powerpc/64s/exception: move head-64.h exception code to exception-64s.S Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 19/44] powerpc/64s/exception: Add EXC_HV_OR_STD, which selects HSRR if HVMODE Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 20/44] powerpc/64s/exception: Fix performance monitor virt handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 21/44] powerpc/64s/exception: remove 0xb00 handler Nicholas Piggin
2019-08-21 12:18 ` Michael Ellerman
2019-08-02 10:56 ` [PATCH v2 22/44] powerpc/64s/exception: Replace PROLOG macros and EXC helpers with a gas macro Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 23/44] powerpc/64s/exception: remove EXCEPTION_PROLOG_0/1, rename _2 Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 24/44] powerpc/64s/exception: Add the virt variant of the denorm interrupt handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 25/44] powerpc/64s/exception: INT_HANDLER support HDAR/HDSISR and use it in HDSI Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 26/44] powerpc/64s/exception: Add INT_KVM_HANDLER gas macro Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 27/44] powerpc/64s/exception: KVM_HANDLER reorder arguments to match other macros Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 28/44] powerpc/64s/exception: Merge EXCEPTION_PROLOG_COMMON_2/3 Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 29/44] powerpc/64s/exception: Add INT_COMMON gas macro to generate common exception code Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 30/44] powerpc/64s/exception: Expand EXCEPTION_COMMON macro into caller Nicholas Piggin
2019-08-02 10:56 ` Nicholas Piggin [this message]
2019-08-02 10:56 ` [PATCH v2 32/44] powerpc/64s/exception: INT_COMMON add DAR, DSISR, reconcile options Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 33/44] powerpc/64s/exception: move interrupt entry code above the common handler Nicholas Piggin
2019-08-02 10:56 ` [PATCH v2 34/44] powerpc/64s/exception: program check handler do not branch into a macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 35/44] powerpc/64s/exception: Remove pointless KVM handler name bifurcation Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 36/44] powerpc/64s/exception: reduce page fault unnecessary loads Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 37/44] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 38/44] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 39/44] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 40/44] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 41/44] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 42/44] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 43/44] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-08-02 10:57 ` [PATCH v2 44/44] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190802105709.27696-32-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).