[PATCH v4 06/16] powerpc: Introduce the MSR_S bit

[Thiago Jung Bauermann <bauerman@linux.ibm.com>]

From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>

Protected Execution Facility (PEF) is an architectural change for
POWER 9 that enables Secure Virtual Machines (SVMs). When enabled,
PEF adds a new higher privileged mode, called Ultravisor mode, to
POWER architecture.

The hardware changes include the following:

  * There is a new bit in the MSR that determines whether the current
    process is running in secure mode, MSR(S) bit 41. MSR(S)=1, process
    is in secure mode, MSR(s)=0 process is in normal mode.

  * The MSR(S) bit can only be set by the Ultravisor.

  * HRFID cannot be used to set the MSR(S) bit. If the hypervisor needs
    to return to a SVM it must use an ultracall. It can determine if
    the VM it is returning to is secure.

  * The privilege of a process is now determined by three MSR bits,
    MSR(S, HV, PR). In each of the tables below the modes are listed
    from least privilege to highest privilege. The higher privilege
    modes can access all the resources of the lower privilege modes.

    **Secure Mode MSR Settings**

       +---+---+---+---------------+
       | S | HV| PR|Privilege      |
       +===+===+===+===============+
       | 1 | 0 | 1 | Problem       |
       +---+---+---+---------------+
       | 1 | 0 | 0 | Privileged(OS)|
       +---+---+---+---------------+
       | 1 | 1 | 0 | Ultravisor    |
       +---+---+---+---------------+
       | 1 | 1 | 1 | Reserved      |
       +---+---+---+---------------+

    **Normal Mode MSR Settings**

       +---+---+---+---------------+
       | S | HV| PR|Privilege      |
       +===+===+===+===============+
       | 0 | 0 | 1 | Problem       |
       +---+---+---+---------------+
       | 0 | 0 | 0 | Privileged(OS)|
       +---+---+---+---------------+
       | 0 | 1 | 0 | Hypervisor    |
       +---+---+---+---------------+
       | 0 | 1 | 1 | Problem (HV)  |
       +---+---+---+---------------+

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[ cclaudio: Update the commit message ]
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
---
 arch/powerpc/include/asm/reg.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 10caa145f98b..ec3714cf0989 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -38,6 +38,7 @@
 #define MSR_TM_LG	32		/* Trans Mem Available */
 #define MSR_VEC_LG	25	        /* Enable AltiVec */
 #define MSR_VSX_LG	23		/* Enable VSX */
+#define MSR_S_LG	22		/* Secure state */
 #define MSR_POW_LG	18		/* Enable Power Management */
 #define MSR_WE_LG	18		/* Wait State Enable */
 #define MSR_TGPR_LG	17		/* TLB Update registers in use */
@@ -71,11 +72,13 @@
 #define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
 #define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
 #define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
+#define MSR_S		__MASK(MSR_S_LG)	/* Secure state */
 #else
 /* so tests for these bits fail on 32-bit */
 #define MSR_SF		0
 #define MSR_ISF		0
 #define MSR_HV		0
+#define MSR_S		0
 #endif
 
 /*