From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH 06/10] powerpc/64s/exception: remove the SPR saving patch code macros
Date: Wed, 21 Aug 2019 22:23:11 +1000 [thread overview]
Message-ID: <20190821122315.9535-7-npiggin@gmail.com> (raw)
In-Reply-To: <20190821122315.9535-1-npiggin@gmail.com>
These are used infrequently enough they don't provide much help, so
inline them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 82 ++++++++++------------------
1 file changed, 28 insertions(+), 54 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 705cca95e03c..14351e1b27df 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -110,46 +110,6 @@ name:
#define EXC_HV 1
#define EXC_STD 0
-/*
- * PPR save/restore macros used in exceptions-64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra) \
-BEGIN_FTR_SECTION_NESTED(940) \
- ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \
- std ra,_PPR(r1); \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra) \
-BEGIN_FTR_SECTION_NESTED(941) \
- ld ra,area+EX_PPR(r13); \
- mtspr SPRN_PPR,ra; \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mfspr ra,spr; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mtspr spr,ra; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- std ra,offset(r13); \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
/*
* Branch to label using its 0xC000 address. This results in instruction
* address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
@@ -278,18 +238,18 @@ do_define_int n
cmpwi r10,KVM_GUEST_MODE_SKIP
beq 89f
.else
-BEGIN_FTR_SECTION_NESTED(947)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,HSTATE_CFAR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
.endif
ld r10,PACA_EXGEN+EX_CTR(r13)
mtctr r10
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_PPR(r13)
std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r11,IAREA+EX_R11(r13)
ld r12,IAREA+EX_R12(r13)
std r12,HSTATE_SCRATCH0(r13)
@@ -389,10 +349,14 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
SET_SCRATCH0(r13) /* save r13 */
GET_PACA(r13)
std r9,IAREA+EX_R9(r13) /* save r9 */
- OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+ mfspr r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
HMT_MEDIUM
std r10,IAREA+EX_R10(r13) /* save r10 - r12 */
- OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
.if \ool
.if !\virt
b tramp_real_\name
@@ -405,8 +369,12 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
.endif
.endif
- OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR)
- OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR)
+BEGIN_FTR_SECTION
+ std r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+ std r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
INTERRUPT_TO_KERNEL
mfctr r10
std r10,IAREA+EX_CTR(r13)
@@ -553,7 +521,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
.endif
beq 101f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r13, r9, r10)
- SAVE_PPR(IAREA, r9)
+BEGIN_FTR_SECTION
+ ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */
+ std r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
101:
.else
.if IKUAP
@@ -593,10 +564,10 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
std r10,_DSISR(r1)
.endif
-BEGIN_FTR_SECTION_NESTED(66)
+BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,ORIG_GPR3(r1)
-END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
ld r10,IAREA+EX_CTR(r13)
std r10,_CTR(r1)
std r2,GPR2(r1) /* save r2 in stackframe */
@@ -1716,10 +1687,10 @@ TRAMP_REAL_BEGIN(system_call_kvm)
* HMT_MEDIUM. That allows the KVM code to save that value into the
* guest state (it is the guest's PPR value).
*/
-BEGIN_FTR_SECTION_NESTED(948)
+BEGIN_FTR_SECTION
mfspr r10,SPRN_PPR
std r10,HSTATE_PPR(r13)
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
HMT_MEDIUM
mfctr r10
SET_SCRATCH0(r10)
@@ -2298,7 +2269,10 @@ denorm_done:
mtspr SPRN_HSRR0,r11
mtcrf 0x80,r9
ld r9,PACA_EXGEN+EX_R9(r13)
- RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+ ld r10,PACA_EXGEN+EX_PPR(r13)
+ mtspr SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
BEGIN_FTR_SECTION
ld r10,PACA_EXGEN+EX_CFAR(r13)
mtspr SPRN_CFAR,r10
--
2.22.0
next prev parent reply other threads:[~2019-08-21 12:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 12:23 [PATCH 00/10] powerpc/64s/exception: initial reworking of Nicholas Piggin
2019-08-21 12:23 ` [PATCH 01/10] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-08-21 12:23 ` [PATCH 02/10] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-08-21 12:23 ` [PATCH 03/10] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-08-21 12:23 ` [PATCH 04/10] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-08-21 12:23 ` [PATCH 05/10] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-08-21 12:23 ` Nicholas Piggin [this message]
2019-08-21 12:23 ` [PATCH 07/10] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-08-21 12:23 ` [PATCH 08/10] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-08-21 12:23 ` [PATCH 09/10] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-08-21 12:23 ` [PATCH 10/10] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821122315.9535-7-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).