From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 11/20] powerpc/64s/exception: move soft-mask test to common code
Date: Wed, 4 Sep 2019 21:55:26 +1000 [thread overview]
Message-ID: <20190904115535.18559-12-npiggin@gmail.com> (raw)
In-Reply-To: <20190904115535.18559-1-npiggin@gmail.com>
As well as moving code out of the unrelocated vectors, this allows the
masked handlers to be moved to common code, and allows the soft_nmi
handler to be generated more like a regular handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 106 +++++++++++++--------------
1 file changed, 49 insertions(+), 57 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 473ba1fa7bbe..af41de2dbc75 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -411,36 +411,6 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
.if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT)
KVMTEST \name IHSRR IVEC
.endif
- .if IMASK
- lbz r10,PACAIRQSOFTMASK(r13)
- andi. r10,r10,IMASK
- /* Associate vector numbers with bits in paca->irq_happened */
- .if IVEC == 0x500 || IVEC == 0xea0
- li r10,PACA_IRQ_EE
- .elseif IVEC == 0x900
- li r10,PACA_IRQ_DEC
- .elseif IVEC == 0xa00 || IVEC == 0xe80
- li r10,PACA_IRQ_DBELL
- .elseif IVEC == 0xe60
- li r10,PACA_IRQ_HMI
- .elseif IVEC == 0xf00
- li r10,PACA_IRQ_PMI
- .else
- .abort "Bad maskable vector"
- .endif
-
- .if IHSRR == EXC_HV_OR_STD
- BEGIN_FTR_SECTION
- bne masked_Hinterrupt
- FTR_SECTION_ELSE
- bne masked_interrupt
- ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
- .elseif IHSRR
- bne masked_Hinterrupt
- .else
- bne masked_interrupt
- .endif
- .endif
std r11,IAREA+EX_R11(r13)
std r12,IAREA+EX_R12(r13)
@@ -525,6 +495,37 @@ DEFINE_FIXED_SYMBOL(\name\()_common_virt)
.endm
.macro __GEN_COMMON_BODY name
+ .if IMASK
+ lbz r10,PACAIRQSOFTMASK(r13)
+ andi. r10,r10,IMASK
+ /* Associate vector numbers with bits in paca->irq_happened */
+ .if IVEC == 0x500 || IVEC == 0xea0
+ li r10,PACA_IRQ_EE
+ .elseif IVEC == 0x900
+ li r10,PACA_IRQ_DEC
+ .elseif IVEC == 0xa00 || IVEC == 0xe80
+ li r10,PACA_IRQ_DBELL
+ .elseif IVEC == 0xe60
+ li r10,PACA_IRQ_HMI
+ .elseif IVEC == 0xf00
+ li r10,PACA_IRQ_PMI
+ .else
+ .abort "Bad maskable vector"
+ .endif
+
+ .if IHSRR == EXC_HV_OR_STD
+ BEGIN_FTR_SECTION
+ bne masked_Hinterrupt
+ FTR_SECTION_ELSE
+ bne masked_interrupt
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .elseif IHSRR
+ bne masked_Hinterrupt
+ .else
+ bne masked_interrupt
+ .endif
+ .endif
+
.if ISTACK
andi. r10,r12,MSR_PR /* See if coming from user */
mr r10,r1 /* Save r1 */
@@ -2339,18 +2340,10 @@ EXC_VIRT_NONE(0x5800, 0x100)
#ifdef CONFIG_PPC_WATCHDOG
-#define MASKED_DEC_HANDLER_LABEL 3f
-
-#define MASKED_DEC_HANDLER(_H) \
-3: /* soft-nmi */ \
- std r12,PACA_EXGEN+EX_R12(r13); \
- GET_SCRATCH0(r10); \
- std r10,PACA_EXGEN+EX_R13(r13); \
- mfspr r11,SPRN_SRR0; /* save SRR0 */ \
- mfspr r12,SPRN_SRR1; /* and SRR1 */ \
- LOAD_HANDLER(r10, soft_nmi_common); \
- mtctr r10; \
- bctr
+INT_DEFINE_BEGIN(soft_nmi)
+ IVEC=0x900
+ ISTACK=0
+INT_DEFINE_END(soft_nmi)
/*
* Branch to soft_nmi_interrupt using the emergency stack. The emergency
@@ -2362,19 +2355,16 @@ EXC_VIRT_NONE(0x5800, 0x100)
* and run it entirely with interrupts hard disabled.
*/
EXC_COMMON_BEGIN(soft_nmi_common)
+ mfspr r11,SPRN_SRR0
mr r10,r1
ld r1,PACAEMERGSP(r13)
subi r1,r1,INT_FRAME_SIZE
- __ISTACK(decrementer)=0
- __GEN_COMMON_BODY decrementer
+ __GEN_COMMON_BODY soft_nmi
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl soft_nmi_interrupt
b ret_from_except
-#else /* CONFIG_PPC_WATCHDOG */
-#define MASKED_DEC_HANDLER_LABEL 2f /* normal return */
-#define MASKED_DEC_HANDLER(_H)
#endif /* CONFIG_PPC_WATCHDOG */
/*
@@ -2393,7 +2383,6 @@ masked_Hinterrupt:
.else
masked_interrupt:
.endif
- std r11,PACA_EXGEN+EX_R11(r13)
lbz r11,PACAIRQHAPPENED(r13)
or r11,r11,r10
stb r11,PACAIRQHAPPENED(r13)
@@ -2402,26 +2391,30 @@ masked_interrupt:
lis r10,0x7fff
ori r10,r10,0xffff
mtspr SPRN_DEC,r10
- b MASKED_DEC_HANDLER_LABEL
+#ifdef CONFIG_PPC_WATCHDOG
+ b soft_nmi_common
+#else
+ b 2f
+#endif
1: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK
beq 2f
+ xori r12,r12,MSR_EE /* clear MSR_EE */
.if \hsrr
- mfspr r10,SPRN_HSRR1
- xori r10,r10,MSR_EE /* clear MSR_EE */
- mtspr SPRN_HSRR1,r10
+ mtspr SPRN_HSRR1,r12
.else
- mfspr r10,SPRN_SRR1
- xori r10,r10,MSR_EE /* clear MSR_EE */
- mtspr SPRN_SRR1,r10
+ mtspr SPRN_SRR1,r12
.endif
ori r11,r11,PACA_IRQ_HARD_DIS
stb r11,PACAIRQHAPPENED(r13)
2: /* done */
+ ld r10,PACA_EXGEN+EX_CTR(r13)
+ mtctr r10
mtcrf 0x80,r9
std r1,PACAR1(r13)
ld r9,PACA_EXGEN+EX_R9(r13)
ld r10,PACA_EXGEN+EX_R10(r13)
ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
/* returns to kernel where r13 must be set up, so don't restore it */
.if \hsrr
HRFI_TO_KERNEL
@@ -2429,7 +2422,6 @@ masked_interrupt:
RFI_TO_KERNEL
.endif
b .
- MASKED_DEC_HANDLER(\hsrr\())
.endm
TRAMP_REAL_BEGIN(stf_barrier_fallback)
@@ -2536,7 +2528,7 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback)
* instruction code patches (which end up in the common .text area)
* cannot reach these if they are put there.
*/
-USE_FIXED_SECTION(virt_trampolines)
+USE_TEXT_SECTION()
MASKED_INTERRUPT EXC_STD
MASKED_INTERRUPT EXC_HV
--
2.22.0
next prev parent reply other threads:[~2019-09-04 12:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 11:55 [PATCH v2 00/20] remaining interrupt handler changes Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 01/20] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 02/20] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 03/20] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 04/20] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 05/20] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 06/20] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 07/20] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 08/20] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 09/20] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 10/20] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-04 11:55 ` Nicholas Piggin [this message]
2019-09-04 11:55 ` [PATCH v2 12/20] powerpc/64s/exception: move KVM test to common code Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 13/20] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 14/20] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 15/20] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 16/20] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 17/20] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 18/20] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 19/20] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-04 11:55 ` [PATCH v2 20/20] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904115535.18559-12-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).