From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>,
Nicholas Piggin <npiggin@gmail.com>
Subject: [RFC PATCH 16/27] powerpc/64s/exception: hdecrementer avoid touching the stack
Date: Sun, 15 Sep 2019 11:28:02 +1000 [thread overview]
Message-ID: <20190915012813.29317-17-npiggin@gmail.com> (raw)
In-Reply-To: <20190915012813.29317-1-npiggin@gmail.com>
The hdec interrupt handler is reported to sometimes fire in Linux if
KVM leaves it pending after a guest exists. This is harmless, so there
is a no-op handler for it.
The interrupt handler currently uses the regular kernel stack. Change
this to avoid touching the stack entirely.
This should be the last place where the regular Linux stack can be
accessed with asynchronous interrupts (including PMI) soft-masked.
It might be possible to take advantage of this invariant, e.g., to
context switch the kernel stack SLB entry without clearing MSR[EE].
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/time.h | 1 -
arch/powerpc/kernel/exceptions-64s.S | 25 ++++++++++++++++++++-----
arch/powerpc/kernel/time.c | 9 ---------
3 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 08dbe3e6831c..e0107495c4de 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -24,7 +24,6 @@ extern struct clock_event_device decrementer_clockevent;
extern void generic_calibrate_decr(void);
-extern void hdec_interrupt(struct pt_regs *regs);
/* Some sane defaults: 125 MHz timebase, 1GHz processor */
extern unsigned long ppc_proc_freq;
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9fa71d51ecf4..7a234e6d7bf5 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1491,6 +1491,8 @@ EXC_COMMON_BEGIN(decrementer_common)
INT_DEFINE_BEGIN(hdecrementer)
IVEC=0x980
IHSRR=EXC_HV
+ ISTACK=0
+ IRECONCILE=0
IKVM_REAL=1
IKVM_VIRT=1
INT_DEFINE_END(hdecrementer)
@@ -1502,11 +1504,24 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80)
GEN_INT_ENTRY hdecrementer, virt=1
EXC_VIRT_END(hdecrementer, 0x4980, 0x80)
EXC_COMMON_BEGIN(hdecrementer_common)
- GEN_COMMON hdecrementer
- bl save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl hdec_interrupt
- b ret_from_except
+ __GEN_COMMON_ENTRY hdecrementer
+ /*
+ * Hypervisor decrementer interrupts not caught by the KVM test
+ * shouldn't occur but are sometimes left pending on exit from a KVM
+ * guest. We don't need to do anything to clear them, as they are
+ * edge-triggered.
+ *
+ * Be careful to avoid touching the kernel stack.
+ */
+ ld r10,PACA_EXGEN+EX_CTR(r13)
+ mtctr r10
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ HRFI_TO_KERNEL
GEN_KVM hdecrementer
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 694522308cd5..bebc8c440289 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -663,15 +663,6 @@ void timer_broadcast_interrupt(void)
}
#endif
-/*
- * Hypervisor decrementer interrupts shouldn't occur but are sometimes
- * left pending on exit from a KVM guest. We don't need to do anything
- * to clear them, as they are edge-triggered.
- */
-void hdec_interrupt(struct pt_regs *regs)
-{
-}
-
#ifdef CONFIG_SUSPEND
static void generic_suspend_disable_irqs(void)
{
--
2.23.0
next prev parent reply other threads:[~2019-09-15 2:01 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-15 1:27 [RFC PATCH 00/27] current interrupt series plus scv syscall Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 01/27] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 02/27] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 03/27] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 04/27] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 05/27] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 06/27] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 07/27] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 08/27] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 09/27] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 10/27] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 11/27] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 12/27] powerpc/64s/exception: move KVM " Nicholas Piggin
2019-09-15 1:27 ` [RFC PATCH 13/27] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 14/27] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 15/27] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2019-09-15 1:28 ` Nicholas Piggin [this message]
2019-09-15 1:28 ` [RFC PATCH 17/27] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 18/27] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 19/27] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 20/27] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 21/27] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 22/27] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 23/27] powerpc/64: system call implement the bulk of the logic in C Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 3:10 ` Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 24/27] powerpc/64s: interrupt return " Nicholas Piggin
2019-10-02 8:20 ` Michal Suchánek
2019-09-15 1:28 ` [RFC PATCH 25/27] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 26/27] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2019-09-15 1:28 ` [RFC PATCH 27/27] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2019-10-02 8:21 ` Michal Suchánek
2019-10-02 8:20 ` [RFC PATCH 00/27] current interrupt series plus scv syscall Michal Suchánek
2019-10-02 3:13 ` Nicholas Piggin
2019-10-30 12:55 ` Michal Suchánek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190915012813.29317-17-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=tuliom@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).