[PATCH AUTOSEL 5.3 097/203] powerpc/Makefile: Always pass --synthetic to nm if supported

[PATCH AUTOSEL 5.3 097/203] powerpc/Makefile: Always pass --synthetic to nm if supported

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 117acf5c29dd89e4c86761c365b9724dba0d9763 ]

Back in 2004 we added logic to arch/ppc64/Makefile to pass
the --synthetic option to nm, if it was supported by nm.

Then in 2005 when arch/ppc64 and arch/ppc were merged, the logic to
add --synthetic was moved inside an #ifdef CONFIG_PPC64 block within
arch/powerpc/Makefile, and has remained there since.

That was fine, though crufty, until recently when a change to
init/Kconfig added a config time check that uses $(NM). On powerpc
that leads to an infinite loop because Kconfig uses $(NM) to calculate
some values, then the powerpc Makefile changes $(NM), which Kconfig
notices and restarts.

The original commit that added --synthetic simply said:
  On new toolchains we need to use nm --synthetic or we miss code
  symbols.

And the nm man page says that the --synthetic option causes nm to:
  Include synthetic symbols in the output. These are special symbols
  created by the linker for various purposes.

So it seems safe to always pass --synthetic if nm supports it, ie. on
32-bit and 64-bit, it just means 32-bit kernels might have more
symbols reported (and in practice I see no extra symbols). Making it
unconditional avoids the #ifdef CONFIG_PPC64, which in turn avoids the
infinite loop.

Debugged-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index c345b79414a96..403f7e193833a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -39,13 +39,11 @@ endif
 uname := $(shell uname -m)
 KBUILD_DEFCONFIG := $(if $(filter ppc%,$(uname)),$(uname),ppc64)_defconfig
 
-ifdef CONFIG_PPC64
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
 ifeq ($(new_nm),y)
 NM		:= $(NM) --synthetic
 endif
-endif
 
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
-- 
2.20.1

[PATCH AUTOSEL 5.3 143/203] ASoC: fsl_ssi: Fix clock control issue in master mode

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 696d05225cebffd172008d212657be90e823eac0 ]

The test case is
arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav &
aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav

There will be error after end of arecord:
aplay: pcm_write:2051: write error: Input/output error

Capture and Playback work in parallel in master mode, one
substream stops, the other substream is impacted, the
reason is that clock is disabled wrongly.

The clock's reference count is not increased when second
substream starts, the hw_param() function returns in the
beginning because first substream is enabled, then in end
of first substream, the hw_free() disables the clock.

This patch is to move the clock enablement to the place
before checking of the device enablement in hw_param().

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_ssi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index fa862af25c1a3..085855f9b08d4 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -799,15 +799,6 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	u32 wl = SSI_SxCCR_WL(sample_size);
 	int ret;
 
-	/*
-	 * SSI is properly configured if it is enabled and running in
-	 * the synchronous mode; Note that AC97 mode is an exception
-	 * that should set separate configurations for STCCR and SRCCR
-	 * despite running in the synchronous mode.
-	 */
-	if (ssi->streams && ssi->synchronous)
-		return 0;
-
 	if (fsl_ssi_is_i2s_master(ssi)) {
 		ret = fsl_ssi_set_bclk(substream, dai, hw_params);
 		if (ret)
@@ -823,6 +814,15 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	/*
+	 * SSI is properly configured if it is enabled and running in
+	 * the synchronous mode; Note that AC97 mode is an exception
+	 * that should set separate configurations for STCCR and SRCCR
+	 * despite running in the synchronous mode.
+	 */
+	if (ssi->streams && ssi->synchronous)
+		return 0;
+
 	if (!fsl_ssi_is_ac97(ssi)) {
 		/*
 		 * Keep the ssi->i2s_net intact while having a local variable
-- 
2.20.1