[PATCH 1/4] powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions

[PATCH 1/4] powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions

[Aneesh Kumar K.V]

The store ordering vs tlbie issue mentioned in
commit a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't need
to apply the fixup if we are running on them

We can only do this on PowerNV. On pseries guest with kvm we still don't
support redoing the feature fixup after migration. So we should be enabling
all the workarounds needed, because whe can possibly migrate between
DD 2.3 and DD 2.2

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 arch/powerpc/kernel/dt_cpu_ftrs.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index bd95318d2202..eeaff2085120 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -691,9 +691,35 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f)
 	return true;
 }
 
+/*
+ * Handle POWER9 broadcast tlbie invalidation issue using
+ * cpu feature flag.
+ */
+static __init void update_tlbie_feature_flag(unsigned long pvr)
+{
+	if (PVR_VER(pvr) == PVR_POWER9) {
+		/*
+		 * Set the tlbie feature flag for anything below
+		 * Nimbus DD 2.3 and Cumulus DD 1.3
+		 */
+		if ((pvr & 0xe000) == 0) {
+			/* Nimbus */
+			if ((pvr & 0xfff) < 0x203)
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		} else if ((pvr & 0xc000) == 0) {
+			/* Cumulus */
+			if ((pvr & 0xfff) < 0x103)
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		} else {
+			WARN_ONCE(1, "Unknown PVR");
+			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		}
+	}
+}
+
 static __init void cpufeatures_cpu_quirks(void)
 {
-	int version = mfspr(SPRN_PVR);
+	unsigned long version = mfspr(SPRN_PVR);
 
 	/*
 	 * Not all quirks can be derived from the cpufeatures device tree.
@@ -712,10 +738,10 @@ static __init void cpufeatures_cpu_quirks(void)
 
 	if ((version & 0xffff0000) == 0x004e0000) {
 		cur_cpu_spec->cpu_features &= ~(CPU_FTR_DAWR);
-		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
 		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TIDR;
 	}
 
+	update_tlbie_feature_flag(version);
 	/*
 	 * PKEY was not in the initial base or feature node
 	 * specification, but it should become optional in the next
-- 
2.21.0

[PATCH 2/4] powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag

[Aneesh Kumar K.V]

Rename the #define to indicate this is related to store vs tlbie ordering issue.
In the next patch, we will be adding another feature flag that is used to
handles ERAT flush vs tlbie ordering issue.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h    | 4 ++--
 arch/powerpc/kernel/dt_cpu_ftrs.c      | 6 +++---
 arch/powerpc/kvm/book3s_hv_rm_mmu.c    | 2 +-
 arch/powerpc/mm/book3s64/hash_native.c | 2 +-
 arch/powerpc/mm/book3s64/radix_tlb.c   | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index a1ebcbc3931f..f080fba48619 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -209,7 +209,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_POWER9_DD2_1		LONG_ASM_CONST(0x0000080000000000)
 #define CPU_FTR_P9_TM_HV_ASSIST		LONG_ASM_CONST(0x0000100000000000)
 #define CPU_FTR_P9_TM_XER_SO_BUG	LONG_ASM_CONST(0x0000200000000000)
-#define CPU_FTR_P9_TLBIE_BUG		LONG_ASM_CONST(0x0000400000000000)
+#define CPU_FTR_P9_TLBIE_STQ_BUG	LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_P9_TIDR			LONG_ASM_CONST(0x0000800000000000)
 
 #ifndef __ASSEMBLY__
@@ -457,7 +457,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_P9_TLBIE_BUG | CPU_FTR_P9_TIDR)
+	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TIDR)
 #define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
 #define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
 #define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index eeaff2085120..4ddf2c7a7fb7 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -705,14 +705,14 @@ static __init void update_tlbie_feature_flag(unsigned long pvr)
 		if ((pvr & 0xe000) == 0) {
 			/* Nimbus */
 			if ((pvr & 0xfff) < 0x203)
-				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		} else if ((pvr & 0xc000) == 0) {
 			/* Cumulus */
 			if ((pvr & 0xfff) < 0x103)
-				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		} else {
 			WARN_ONCE(1, "Unknown PVR");
-			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		}
 	}
 }
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 63e0ce91e29d..7d89b1b10ea5 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -451,7 +451,7 @@ static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues,
 				     "r" (rbvalues[i]), "r" (kvm->arch.lpid));
 		}
 
-		if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+		if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 			/*
 			 * Need the extra ptesync to make sure we don't
 			 * re-order the tlbie
diff --git a/arch/powerpc/mm/book3s64/hash_native.c b/arch/powerpc/mm/book3s64/hash_native.c
index 90ab4f31e2b3..02568dae4695 100644
--- a/arch/powerpc/mm/book3s64/hash_native.c
+++ b/arch/powerpc/mm/book3s64/hash_native.c
@@ -199,7 +199,7 @@ static inline unsigned long  ___tlbie(unsigned long vpn, int psize,
 
 static inline void fixup_tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 {
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		/* Need the extra ptesync to ensure we don't reorder tlbie*/
 		asm volatile("ptesync": : :"memory");
 		___tlbie(vpn, psize, apsize, ssize);
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 631be42abd33..69fdc004d83f 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -201,7 +201,7 @@ static inline void fixup_tlbie(void)
 	unsigned long pid = 0;
 	unsigned long va = ((1UL << 52) - 1);
 
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_va(va, pid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}
@@ -211,7 +211,7 @@ static inline void fixup_tlbie_lpid(unsigned long lpid)
 {
 	unsigned long va = ((1UL << 52) - 1);
 
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_lpid_va(va, lpid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}
-- 
2.21.0

[PATCH 3/4] powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9

[Aneesh Kumar K.V]

On POWER9, under some circumstances, a broadcast TLB invalidation
will fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.

The workaround is to force an ERAT flush using PID=0 or LPID=0
tlbie flush. This additional TLB flush will cause the ERAT cache invalidation.
Since we are using PID=0 or LPID=0, we don't get filtered out by the TLB snoop
filtering logic.

We need to still follow this up with another tlbie to take care of store vs
tlbie ordering issue explained in commit: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs
store ordering issue on POWER9"). The presence of ERAT cache implies we can still
get new stores and they may miss store queue marking flush.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h    |  3 +-
 arch/powerpc/kernel/dt_cpu_ftrs.c      |  2 +
 arch/powerpc/kvm/book3s_hv_rm_mmu.c    | 42 +++++++++++----
 arch/powerpc/mm/book3s64/hash_native.c | 29 ++++++++--
 arch/powerpc/mm/book3s64/radix_tlb.c   | 74 +++++++++++++++++++++++---
 5 files changed, 128 insertions(+), 22 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index f080fba48619..cf00ff0d121d 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -211,6 +211,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_P9_TM_XER_SO_BUG	LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_P9_TLBIE_STQ_BUG	LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_P9_TIDR			LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -457,7 +458,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TIDR)
+	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TLBIE_ERAT_BUG | CPU_FTR_P9_TIDR)
 #define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
 #define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
 #define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 4ddf2c7a7fb7..864cc55fa03c 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -714,6 +714,8 @@ static __init void update_tlbie_feature_flag(unsigned long pvr)
 			WARN_ONCE(1, "Unknown PVR");
 			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		}
+
+		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_ERAT_BUG;
 	}
 }
 
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 7d89b1b10ea5..47f86252e8a1 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -433,6 +433,37 @@ static inline int is_mmio_hpte(unsigned long v, unsigned long r)
 		(HPTE_R_KEY_HI | HPTE_R_KEY_LO));
 }
 
+static inline void fixup_tlbie_lpid(unsigned long rb_value, unsigned long lpid)
+{
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		/* Radix flush for a hash guest */
+
+		unsigned long rb,rs,prs,r,ric;
+
+		rb = PPC_BIT(52); /* IS = 2 */
+		rs = 0;  /* lpid = 0 */
+		prs = 0; /* partition scoped */
+		r = 1;   /* radix format */
+		ric = 0; /* RIC_FLSUH_TLB */
+
+		/*
+		 * Need the extra ptesync to make sure we don't
+		 * re-order the tlbie
+		 */
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+			     : : "r"(rb), "i"(r), "i"(prs),
+			       "i"(ric), "r"(rs) : "memory");
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0,%1,0,0,0) : :
+			     "r" (rb_value), "r" (lpid));
+	}
+}
+
 static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues,
 		      long npages, int global, bool need_sync)
 {
@@ -451,16 +482,7 @@ static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues,
 				     "r" (rbvalues[i]), "r" (kvm->arch.lpid));
 		}
 
-		if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
-			/*
-			 * Need the extra ptesync to make sure we don't
-			 * re-order the tlbie
-			 */
-			asm volatile("ptesync": : :"memory");
-			asm volatile(PPC_TLBIE_5(%0,%1,0,0,0) : :
-				     "r" (rbvalues[0]), "r" (kvm->arch.lpid));
-		}
-
+		fixup_tlbie_lpid(rbvalues[i - 1], kvm->arch.lpid);
 		asm volatile("eieio; tlbsync; ptesync" : : : "memory");
 	} else {
 		if (need_sync)
diff --git a/arch/powerpc/mm/book3s64/hash_native.c b/arch/powerpc/mm/book3s64/hash_native.c
index 02568dae4695..523e42eb11da 100644
--- a/arch/powerpc/mm/book3s64/hash_native.c
+++ b/arch/powerpc/mm/book3s64/hash_native.c
@@ -197,8 +197,31 @@ static inline unsigned long  ___tlbie(unsigned long vpn, int psize,
 	return va;
 }
 
-static inline void fixup_tlbie(unsigned long vpn, int psize, int apsize, int ssize)
+static inline void fixup_tlbie_vpn(unsigned long vpn, int psize,
+				   int apsize, int ssize)
 {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		/* Radix flush for a hash guest */
+
+		unsigned long rb,rs,prs,r,ric;
+
+		rb = PPC_BIT(52); /* IS = 2 */
+		rs = 0;  /* lpid = 0 */
+		prs = 0; /* partition scoped */
+		r = 1;   /* radix format */
+		ric = 0; /* RIC_FLSUH_TLB */
+
+		/*
+		 * Need the extra ptesync to make sure we don't
+		 * re-order the tlbie
+		 */
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+			     : : "r"(rb), "i"(r), "i"(prs),
+			       "i"(ric), "r"(rs) : "memory");
+	}
+
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		/* Need the extra ptesync to ensure we don't reorder tlbie*/
 		asm volatile("ptesync": : :"memory");
@@ -283,7 +306,7 @@ static inline void tlbie(unsigned long vpn, int psize, int apsize,
 		asm volatile("ptesync": : :"memory");
 	} else {
 		__tlbie(vpn, psize, apsize, ssize);
-		fixup_tlbie(vpn, psize, apsize, ssize);
+		fixup_tlbie_vpn(vpn, psize, apsize, ssize);
 		asm volatile("eieio; tlbsync; ptesync": : :"memory");
 	}
 	if (lock_tlbie && !use_local)
@@ -856,7 +879,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		/*
 		 * Just do one more with the last used values.
 		 */
-		fixup_tlbie(vpn, psize, psize, ssize);
+		fixup_tlbie_vpn(vpn, psize, psize, ssize);
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
 
 		if (lock_tlbie)
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 69fdc004d83f..99f202e0110c 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -196,21 +196,76 @@ static __always_inline void __tlbie_lpid_va(unsigned long va, unsigned long lpid
 	trace_tlbie(lpid, 0, rb, rs, ric, prs, r);
 }
 
-static inline void fixup_tlbie(void)
+
+static inline void fixup_tlbie_va(unsigned long va, unsigned long pid,
+				  unsigned long ap)
+{
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, 0, ap, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, pid, ap, RIC_FLUSH_TLB);
+	}
+}
+
+static inline void fixup_tlbie_va_range(unsigned long va, unsigned long pid,
+					unsigned long ap)
 {
-	unsigned long pid = 0;
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_pid(0, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, pid, ap, RIC_FLUSH_TLB);
+	}
+}
+
+static inline void fixup_tlbie_pid(unsigned long pid)
+{
+	/* Mostly Unmapped address */
 	unsigned long va = ((1UL << 52) - 1);
 
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_pid(0, RIC_FLUSH_TLB);
+	}
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_va(va, pid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}
 }
 
+
+static inline void fixup_tlbie_lpid_va(unsigned long va, unsigned long lpid,
+				       unsigned long ap)
+{
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid_va(va, 0, ap, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid_va(va, lpid, ap, RIC_FLUSH_TLB);
+	}
+}
+
 static inline void fixup_tlbie_lpid(unsigned long lpid)
 {
+	/* Mostly Unmapped address */
 	unsigned long va = ((1UL << 52) - 1);
 
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid(0, RIC_FLUSH_TLB);
+	}
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_lpid_va(va, lpid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
@@ -258,6 +313,7 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric)
 	switch (ric) {
 	case RIC_FLUSH_TLB:
 		__tlbie_pid(pid, RIC_FLUSH_TLB);
+		fixup_tlbie_pid(pid);
 		break;
 	case RIC_FLUSH_PWC:
 		__tlbie_pid(pid, RIC_FLUSH_PWC);
@@ -265,8 +321,8 @@ static inline void _tlbie_pid(unsigned long pid, unsigned long ric)
 	case RIC_FLUSH_ALL:
 	default:
 		__tlbie_pid(pid, RIC_FLUSH_ALL);
+		fixup_tlbie_pid(pid);
 	}
-	fixup_tlbie();
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -315,6 +371,7 @@ static inline void _tlbie_lpid(unsigned long lpid, unsigned long ric)
 	switch (ric) {
 	case RIC_FLUSH_TLB:
 		__tlbie_lpid(lpid, RIC_FLUSH_TLB);
+		fixup_tlbie_lpid(lpid);
 		break;
 	case RIC_FLUSH_PWC:
 		__tlbie_lpid(lpid, RIC_FLUSH_PWC);
@@ -322,8 +379,8 @@ static inline void _tlbie_lpid(unsigned long lpid, unsigned long ric)
 	case RIC_FLUSH_ALL:
 	default:
 		__tlbie_lpid(lpid, RIC_FLUSH_ALL);
+		fixup_tlbie_lpid(lpid);
 	}
-	fixup_tlbie_lpid(lpid);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -390,6 +447,8 @@ static inline void __tlbie_va_range(unsigned long start, unsigned long end,
 
 	for (addr = start; addr < end; addr += page_size)
 		__tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
+
+	fixup_tlbie_va_range(addr - page_size, pid, ap);
 }
 
 static __always_inline void _tlbie_va(unsigned long va, unsigned long pid,
@@ -399,7 +458,7 @@ static __always_inline void _tlbie_va(unsigned long va, unsigned long pid,
 
 	asm volatile("ptesync": : :"memory");
 	__tlbie_va(va, pid, ap, ric);
-	fixup_tlbie();
+	fixup_tlbie_va(va, pid, ap);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -457,7 +516,7 @@ static __always_inline void _tlbie_lpid_va(unsigned long va, unsigned long lpid,
 
 	asm volatile("ptesync": : :"memory");
 	__tlbie_lpid_va(va, lpid, ap, ric);
-	fixup_tlbie_lpid(lpid);
+	fixup_tlbie_lpid_va(va, lpid, ap);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -469,7 +528,6 @@ static inline void _tlbie_va_range(unsigned long start, unsigned long end,
 	if (also_pwc)
 		__tlbie_pid(pid, RIC_FLUSH_PWC);
 	__tlbie_va_range(start, end, pid, page_size, psize);
-	fixup_tlbie();
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -856,7 +914,7 @@ static inline void __radix__flush_tlb_range(struct mm_struct *mm,
 			if (gflush)
 				__tlbie_va_range(gstart, gend, pid,
 						PUD_SIZE, MMU_PAGE_1G);
-			fixup_tlbie();
+
 			asm volatile("eieio; tlbsync; ptesync": : :"memory");
 		} else {
 			_tlbiel_va_range_multicast(mm,
-- 
2.21.0

[PATCH 4/4] powerpc/mm/selftest: Add test case for tlbie vs mtpidr ordering issue

[Aneesh Kumar K.V]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 tools/testing/selftests/powerpc/mm/Makefile   |   3 +
 .../testing/selftests/powerpc/mm/tlbie_test.c | 739 ++++++++++++++++++
 2 files changed, 742 insertions(+)
 create mode 100644 tools/testing/selftests/powerpc/mm/tlbie_test.c

diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index f1fbc15800c4..b9e88fc408d7 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -4,6 +4,7 @@ noarg:
 
 TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
 		  large_vm_fork_separation
+TEST_GEN_PROGS_EXTENDED=tlbie_test
 TEST_GEN_FILES := tempfile
 
 top_srcdir = ../../../../..
@@ -19,3 +20,5 @@ $(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64
 $(OUTPUT)/tempfile:
 	dd if=/dev/zero of=$@ bs=64k count=1
 
+$(OUTPUT)/tlbie_test: tlbie_test.c
+	cc -o $@ $^ -lpthread
diff --git a/tools/testing/selftests/powerpc/mm/tlbie_test.c b/tools/testing/selftests/powerpc/mm/tlbie_test.c
new file mode 100644
index 000000000000..376fe23d6f63
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/tlbie_test.c
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2019, Nick Piggin, Gautham R. Shenoy, Aneesh Kumar K.V, IBM Corp.
+ */
+
+/*
+ *
+ * Test tlbie/mtpidr race. We have 4 threads doing flush/load/compare/store
+ * sequence in a loop. The same threads also rung a context switch task
+ * that does sched_yield() in loop.
+ *
+ * The snapshot thread mark the mmap area PROT_READ in between, make a copy
+ * and copy it back to the original area. This helps us to detect if any
+ * store continued to happen after we marked the memory PROT_READ.
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <linux/futex.h>
+#include <unistd.h>
+#include <asm/unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <numa.h>
+#include <numaif.h>
+#include <sched.h>
+#include <time.h>
+#include <stdarg.h>
+#include <sched.h>
+#include <pthread.h>
+#include <signal.h>
+#include <sys/prctl.h>
+
+static inline void dcbf(volatile unsigned int*addr)
+{
+	__asm__ __volatile__ ("dcbf %y0; sync" : : "Z"(*(unsigned char *)addr) : "memory");
+}
+
+static void err_msg(char *msg)
+{
+
+	time_t now;
+	time(&now);
+	printf("=================================\n");
+	printf("    Error: %s\n", msg);
+	printf("    %s", ctime(&now));
+	printf("=================================\n");
+	exit(1);
+}
+
+static char *map1;
+static char *map2;
+static pid_t rim_process_pid;
+
+/*
+ * A "rim-sequence" is defined to be the sequence of the following
+ * operations performed on a memory word:
+ *	1) FLUSH the contents of that word.
+ *	2) LOAD the contents of that word.
+ *	3) COMPARE the contents of that word with the content that was
+ *	           previously stored at that word
+ *	4) STORE new content into that word.
+ *
+ * The threads in this test that perform the rim-sequence are termed
+ * as rim_threads.
+ */
+
+/*
+ * A "corruption" is defined to be the failed COMPARE operation in a
+ * rim-sequence.
+ *
+ * A rim_thread that detects a corruption informs about it to all the
+ * other rim_threads, and the mem_snapshot thread.
+ */
+static volatile unsigned int corruption_found;
+
+/*
+ * This defines the maximum number of rim_threads in this test.
+ *
+ * The THREAD_ID_BITS denote the number of bits required
+ * to represent the thread_ids [0..MAX_THREADS - 1].
+ * We are being a bit paranoid here and set it to 8 bits,
+ * though 6 bits suffice.
+ *
+ */
+#define MAX_THREADS 		64
+#define THREAD_ID_BITS		8
+#define THREAD_ID_MASK		((1 << THREAD_ID_BITS) - 1)
+static unsigned int rim_thread_ids[MAX_THREADS];
+static pthread_t rim_threads[MAX_THREADS];
+
+
+/*
+ * Each rim_thread works on an exclusive "chunk" of size
+ * RIM_CHUNK_SIZE.
+ *
+ * The ith rim_thread works on the ith chunk.
+ *
+ * The ith chunk begins at
+ * map1 + (i * RIM_CHUNK_SIZE)
+ */
+#define RIM_CHUNK_SIZE  	1024
+#define BITS_PER_BYTE 		8
+#define WORD_SIZE     		(sizeof(unsigned int))
+#define WORD_BITS		(WORD_SIZE * BITS_PER_BYTE)
+#define WORDS_PER_CHUNK		(RIM_CHUNK_SIZE/WORD_SIZE)
+
+static inline char *compute_chunk_start_addr(unsigned int thread_id)
+{
+	char *chunk_start;
+
+	chunk_start = (char *)((unsigned long)map1 +
+			       (thread_id * RIM_CHUNK_SIZE));
+
+	return chunk_start;
+}
+
+/*
+ * The "word-offset" of a word-aligned address inside a chunk, is
+ * defined to be the number of words that precede the address in that
+ * chunk.
+ *
+ * WORD_OFFSET_BITS denote the number of bits required to represent
+ * the word-offsets of all the word-aligned addresses of a chunk.
+ */
+#define WORD_OFFSET_BITS	(__builtin_ctz(WORDS_PER_CHUNK))
+#define WORD_OFFSET_MASK	((1 << WORD_OFFSET_BITS) - 1)
+
+static inline unsigned int compute_word_offset(char *start, unsigned int *addr)
+{
+	unsigned int delta_bytes, ret;
+	delta_bytes = (unsigned long)addr - (unsigned long)start;
+
+	ret = delta_bytes/WORD_SIZE;
+
+	return ret;
+}
+
+/*
+ * A "sweep" is defined to be the sequential execution of the
+ * rim-sequence by a rim_thread on its chunk one word at a time,
+ * starting from the first word of its chunk and ending with the last
+ * word of its chunk.
+ *
+ * Each sweep of a rim_thread is uniquely identified by a sweep_id.
+ * SWEEP_ID_BITS denote the number of bits required to represent
+ * the sweep_ids of rim_threads.
+ *
+ * As to why SWEEP_ID_BITS are computed as a function of THREAD_ID_BITS,
+ * WORD_OFFSET_BITS, and WORD_BITS, see the "store-pattern" below.
+ */
+#define SWEEP_ID_BITS		(WORD_BITS - (THREAD_ID_BITS + WORD_OFFSET_BITS))
+#define SWEEP_ID_MASK		((1 << SWEEP_ID_BITS) - 1)
+
+/*
+ * A "store-pattern" is the word-pattern that is stored into a word
+ * location in the 4)STORE step of the rim-sequence.
+ *
+ * In the store-pattern, we shall encode:
+ *
+ *      - The thread-id of the rim_thread performing the store
+ *        (The most significant THREAD_ID_BITS)
+ *
+ *      - The word-offset of the address into which the store is being
+ *        performed (The next WORD_OFFSET_BITS)
+ *
+ *      - The sweep_id of the current sweep in which the store is
+ *        being performed. (The lower SWEEP_ID_BITS)
+ *
+ * Store Pattern: 32 bits
+ * |------------------|--------------------|---------------------------------|
+ * |    Thread id     |  Word offset       |         sweep_id                |
+ * |------------------|--------------------|---------------------------------|
+ *    THREAD_ID_BITS     WORD_OFFSET_BITS          SWEEP_ID_BITS
+ *
+ * In the store pattern, the (Thread-id + Word-offset) uniquely identify the
+ * address to which the store is being performed i.e,
+ *    address == map1 +
+ *              (Thread-id * RIM_CHUNK_SIZE) + (Word-offset * WORD_SIZE)
+ *
+ * And the sweep_id in the store pattern identifies the time when the
+ * store was performed by the rim_thread.
+ *
+ * We shall use this property in the 3)COMPARE step of the
+ * rim-sequence.
+ */
+#define SWEEP_ID_SHIFT	0
+#define WORD_OFFSET_SHIFT	(SWEEP_ID_BITS)
+#define THREAD_ID_SHIFT		(WORD_OFFSET_BITS + SWEEP_ID_BITS)
+
+/*
+ * Compute the store pattern for a given thread with id @tid, at
+ * location @addr in the sweep identified by @sweep_id
+ */
+static inline unsigned int compute_store_pattern(unsigned int tid,
+						 unsigned int *addr,
+						 unsigned int sweep_id)
+{
+	unsigned int ret = 0;
+	char *start = compute_chunk_start_addr(tid);
+	unsigned int word_offset = compute_word_offset(start, addr);
+
+	ret += (tid & THREAD_ID_MASK) << THREAD_ID_SHIFT;
+	ret += (word_offset & WORD_OFFSET_MASK) << WORD_OFFSET_SHIFT;
+	ret += (sweep_id & SWEEP_ID_MASK) << SWEEP_ID_SHIFT;
+	return ret;
+}
+
+/* Extract the thread-id from the given store-pattern */
+static inline unsigned int extract_tid(unsigned int pattern)
+{
+	unsigned int ret;
+
+	ret = (pattern >> THREAD_ID_SHIFT) & THREAD_ID_MASK;
+	return ret;
+}
+
+/* Extract the word-offset from the given store-pattern */
+static inline unsigned int extract_word_offset(unsigned int pattern)
+{
+	unsigned int ret;
+
+	ret = (pattern >> WORD_OFFSET_SHIFT) & WORD_OFFSET_MASK;
+
+	return ret;
+}
+
+/* Extract the sweep-id from the given store-pattern */
+static inline unsigned int extract_sweep_id(unsigned int pattern)
+
+{
+	unsigned int ret;
+
+	ret = (pattern >> SWEEP_ID_SHIFT) & SWEEP_ID_MASK;
+
+	return ret;
+}
+
+/************************************************************
+ *                                                          *
+ *          Logging the output of the verification          *
+ *                                                          *
+ ************************************************************/
+#define LOGDIR_NAME_SIZE 100
+static char logdir[LOGDIR_NAME_SIZE];
+
+static FILE *fp[MAX_THREADS];
+static const char logfilename[] ="Thread-%02d-Chunk";
+
+static inline void start_verification_log(unsigned int tid,
+					  unsigned int *addr,
+					  unsigned int cur_sweep_id,
+					  unsigned int prev_sweep_id)
+{
+	FILE *f;
+	char logfile[30];
+	char path[LOGDIR_NAME_SIZE + 30];
+	char separator[2] = "/";
+	time_t now;
+	char *chunk_start = compute_chunk_start_addr(tid);
+	unsigned int size = RIM_CHUNK_SIZE;
+
+	sprintf(logfile, logfilename, tid);
+	strcpy(path, logdir);
+	strcat(path, separator);
+	strcat(path, logfile);
+	f = fopen(path, "w");
+
+	if (!f) {
+		err_msg("Unable to create logfile\n");
+	}
+
+	fp[tid] = f;
+
+	fprintf(f, "----------------------------------------------------------\n");
+	fprintf(f, "PID                = %d\n", rim_process_pid);
+	fprintf(f, "Thread id          = %02d\n", tid);
+	fprintf(f, "Chunk Start Addr   = 0x%016lx\n", (unsigned long)chunk_start);
+	fprintf(f, "Chunk Size         = %d\n", size);
+	fprintf(f, "Next Store Addr    = 0x%016lx\n", (unsigned long)addr);
+	fprintf(f, "Current sweep-id   = 0x%08x\n", cur_sweep_id);
+	fprintf(f, "Previous sweep-id  = 0x%08x\n", prev_sweep_id);
+	fprintf(f, "----------------------------------------------------------\n");
+}
+
+static inline void log_anamoly(unsigned int tid, unsigned int *addr,
+			       unsigned int expected, unsigned int observed)
+{
+	FILE *f = fp[tid];
+
+	fprintf(f, "Thread %02d: Addr 0x%lx: Expected 0x%x, Observed 0x%x\n",
+	        tid, (unsigned long)addr, expected, observed);
+	fprintf(f, "Thread %02d: Expected Thread id   = %02d\n", tid, extract_tid(expected));
+	fprintf(f, "Thread %02d: Observed Thread id   = %02d\n", tid, extract_tid(observed));
+	fprintf(f, "Thread %02d: Expected Word offset = %03d\n", tid, extract_word_offset(expected));
+	fprintf(f, "Thread %02d: Observed Word offset = %03d\n", tid, extract_word_offset(observed));
+	fprintf(f, "Thread %02d: Expected sweep-id    = 0x%x\n", tid, extract_sweep_id(expected));
+	fprintf(f, "Thread %02d: Observed sweep-id    = 0x%x\n", tid, extract_sweep_id(observed));
+	fprintf(f, "----------------------------------------------------------\n");
+}
+
+static inline void end_verification_log(unsigned int tid, unsigned nr_anamolies)
+{
+	FILE *f = fp[tid];
+	char logfile[30];
+	char path[LOGDIR_NAME_SIZE + 30];
+	char separator[] = "/";
+
+	fclose(f);
+
+	if (nr_anamolies == 0) {
+		remove(path);
+		return;
+	}
+
+	sprintf(logfile, logfilename, tid);
+	strcpy(path, logdir);
+	strcat(path, separator);
+	strcat(path, logfile);
+
+	printf("Thread %02d chunk has %d corrupted words. For details check %s\n",
+		tid, nr_anamolies, path);
+}
+
+/*
+ * When a COMPARE step of a rim-sequence fails, the rim_thread informs
+ * everyone else via the shared_memory pointed to by
+ * corruption_found variable. On seeing this, every thread verifies the
+ * content of its chunk as follows.
+ *
+ * Suppose a thread identified with @tid was about to store (but not
+ * yet stored) to @next_store_addr in its current sweep identified
+ * @cur_sweep_id. Let @prev_sweep_id indicate the previous sweep_id.
+ *
+ * This implies that for all the addresses @addr < @next_store_addr,
+ * Thread @tid has already performed a store as part of its current
+ * sweep. Hence we expect the content of such @addr to be:
+ *    |-------------------------------------------------|
+ *    | tid   | word_offset(addr) |    cur_sweep_id     |
+ *    |-------------------------------------------------|
+ *
+ * Since Thread @tid is yet to perform stores on address
+ * @next_store_addr and above, we expect the content of such an
+ * address @addr to be:
+ *    |-------------------------------------------------|
+ *    | tid   | word_offset(addr) |    prev_sweep_id    |
+ *    |-------------------------------------------------|
+ *
+ * The verifier function @verify_chunk does this verification and logs
+ * any anamolies that it finds.
+ */
+static void verify_chunk(unsigned int tid, unsigned int *next_store_addr,
+		  unsigned int cur_sweep_id,
+		  unsigned int prev_sweep_id)
+{
+	unsigned int *iter_ptr;
+	unsigned int size = RIM_CHUNK_SIZE;
+	unsigned int expected;
+	unsigned int observed;
+	char *chunk_start = compute_chunk_start_addr(tid);
+
+	int nr_anamolies = 0;
+
+	start_verification_log(tid, next_store_addr,
+			       cur_sweep_id, prev_sweep_id);
+
+	for (iter_ptr = (unsigned int *)chunk_start;
+	     (unsigned long)iter_ptr < (unsigned long)chunk_start + size;
+	     iter_ptr++) {
+		unsigned int expected_sweep_id;
+
+		if (iter_ptr < next_store_addr) {
+			expected_sweep_id = cur_sweep_id;
+		} else {
+			expected_sweep_id = prev_sweep_id;
+		}
+
+		expected = compute_store_pattern(tid, iter_ptr, expected_sweep_id);
+
+		dcbf((volatile unsigned int*)iter_ptr); //Flush before reading
+		observed = *iter_ptr;
+
+	        if (observed != expected) {
+			nr_anamolies++;
+			log_anamoly(tid, iter_ptr, expected, observed);
+		}
+	}
+
+	end_verification_log(tid, nr_anamolies);
+}
+
+static void set_pthread_cpu(pthread_t th, int cpu)
+{
+	cpu_set_t run_cpu_mask;
+	struct sched_param param;
+
+	CPU_ZERO(&run_cpu_mask);
+	CPU_SET(cpu, &run_cpu_mask);
+	pthread_setaffinity_np(th, sizeof(cpu_set_t), &run_cpu_mask);
+
+	param.sched_priority = 1;
+	if (0 && sched_setscheduler(0, SCHED_FIFO, &param) == -1) {
+		/* haven't reproduced with this setting, it kills random preemption which may be a factor */
+		fprintf(stderr, "could not set SCHED_FIFO, run as root?\n");
+	}
+}
+
+static void set_mycpu(int cpu)
+{
+	cpu_set_t run_cpu_mask;
+	struct sched_param param;
+
+	CPU_ZERO(&run_cpu_mask);
+	CPU_SET(cpu, &run_cpu_mask);
+	sched_setaffinity(0, sizeof(cpu_set_t), &run_cpu_mask);
+
+	param.sched_priority = 1;
+	if (0 && sched_setscheduler(0, SCHED_FIFO, &param) == -1) {
+		fprintf(stderr, "could not set SCHED_FIFO, run as root?\n");
+	}
+}
+
+static volatile int segv_wait;
+
+static void segv_handler(int signo, siginfo_t *info, void *extra)
+{
+	while (segv_wait) {
+		sched_yield();
+	}
+
+}
+
+static void set_segv_handler(void)
+{
+	struct sigaction sa;
+
+	sa.sa_flags = SA_SIGINFO;
+	sa.sa_sigaction = segv_handler;
+
+	if (sigaction(SIGSEGV, &sa, NULL) == -1) {
+		perror("sigaction");
+		exit(EXIT_FAILURE);
+	}
+}
+
+int timeout = 0;
+/*
+ * This function is executed by every rim_thread.
+ *
+ * This function performs sweeps over the exclusive chunks of the
+ * rim_threads executing the rim-sequence one word at a time.
+ */
+static void *rim_fn(void *arg)
+{
+	unsigned int tid = *((unsigned int *)arg);
+
+	int size = RIM_CHUNK_SIZE;
+	char *chunk_start = compute_chunk_start_addr(tid);
+
+	unsigned int prev_sweep_id;
+	unsigned int cur_sweep_id = 0;
+
+	/* word access */
+	unsigned int pattern = cur_sweep_id;
+	unsigned int *pattern_ptr = &pattern;
+	unsigned int *w_ptr, read_data;
+	unsigned int temp_val;
+
+	set_segv_handler();
+
+	/*
+	 * Let us initialize the chunk:
+	 *
+	 * Each word-aligned address addr in the chunk,
+	 * is initialized to :
+	 *    |-------------------------------------------------|
+	 *    | tid   | word_offset(addr) |         0           |
+	 *    |-------------------------------------------------|
+	 */
+	for (w_ptr = (unsigned int *)chunk_start;
+	     (unsigned long)w_ptr < (unsigned long)(chunk_start) + size;
+	     w_ptr++) {
+
+		*pattern_ptr = compute_store_pattern(tid, w_ptr, cur_sweep_id);
+		*w_ptr = *pattern_ptr;
+	}
+
+	while (!corruption_found && !timeout) {
+		prev_sweep_id = cur_sweep_id;
+		cur_sweep_id = cur_sweep_id + 1;
+
+		for (w_ptr = (unsigned int *)chunk_start;
+		     (unsigned long)w_ptr < (unsigned long)(chunk_start) + size;
+		     w_ptr++)  {
+			unsigned int old_pattern;
+
+			/*
+			 * Compute the pattern that we would have
+			 * stored at this location in the previous
+			 * sweep.
+			 */
+			old_pattern = compute_store_pattern(tid, w_ptr, prev_sweep_id);
+
+			/*
+			 * FLUSH:Ensure that we flush the contents of
+			 *       the cache before loading
+			 */
+			dcbf((volatile unsigned int*)w_ptr); //Flush
+
+			/* LOAD: Read the value */
+			read_data = *w_ptr; //Load
+
+			/*
+			 * COMPARE: Is it the same as what we had stored
+			 *          in the previous sweep ? It better be!
+			 */
+			if (read_data != old_pattern) {
+				/* No it isn't! Tell everyone */
+				corruption_found = 1;
+			}
+
+			/*
+			 * Before performing a store, let us check if
+			 * any rim_thread has found a corruption.
+			 */
+			if (corruption_found || timeout) {
+				/*
+				 * Yes. Someone (including us!) has found
+				 * a corruption :(
+				 *
+				 * Let us verify that our chunk is
+				 * correct.
+				 */
+				/* But first, let us allow the dust to settle down! */
+				verify_chunk(tid, w_ptr, cur_sweep_id, prev_sweep_id);
+
+				return 0;
+			}
+
+			/*
+			 * Compute the new pattern that we are going
+			 * to write to this location
+			 */
+			*pattern_ptr = compute_store_pattern(tid, w_ptr, cur_sweep_id);
+
+			/*
+			 * STORE: Now let us write this pattern into
+			 *        the location
+			 */
+			*w_ptr = *pattern_ptr;
+		}
+	}
+
+	return NULL;
+}
+
+
+static unsigned long start_cpu = 0;
+static unsigned long nrthreads = 4;
+
+static pthread_t mem_snapshot_thread;
+
+static void *mem_snapshot_fn(void *arg)
+{
+	int page_size = getpagesize();
+	size_t size = page_size;
+	void *tmp = malloc(size);
+	int i;
+
+	while (!corruption_found && !timeout) {
+		/* Stop memory migration once corruption is found */
+		segv_wait = 1;
+
+		mprotect(map1, size, PROT_READ);
+
+		/*
+		 * Load from the working alias (map1). Loading from map2
+		 * also fails.
+		 */
+		memcpy(tmp, map1, size);
+
+		/*
+		 * Stores must go via map2 which has write permissions, but
+		 * the corrupted data tends to be seen in the snapshot buffer,
+		 * so corruption does not appear to be introduced at the
+		 * copy-back via map2 alias here.
+		 */
+		memcpy(map2, tmp, size);
+		/*
+		 * Before releasing other threads, must ensure the copy
+		 * back to
+		 */
+		asm volatile("sync" ::: "memory");
+		mprotect(map1, size, PROT_READ|PROT_WRITE);
+		asm volatile("sync" ::: "memory");
+		segv_wait = 0;
+
+		usleep(1); /* This value makes a big difference */
+	}
+
+	return 0;
+}
+
+void alrm_sighandler(int sig)
+{
+	timeout = 1;
+}
+
+int main(int argc, char *argv[])
+{
+	int c;
+	int page_size = getpagesize();
+	time_t now;
+	int i, dir_error;
+	pthread_attr_t attr;
+	key_t shm_key = (key_t) getpid();
+	int shmid, run_time = 20 * 60;
+	struct sigaction sa_alrm;
+
+	snprintf(logdir, LOGDIR_NAME_SIZE,
+		 "/tmp/logdir-%u", (unsigned int)getpid());
+	while ((c = getopt(argc, argv, "r:hn:l:t:")) != -1) {
+		switch(c) {
+		case 'r':
+			start_cpu = strtoul(optarg, NULL, 10);
+			break;
+		case 'h':
+			printf("%s [-r <start_cpu>] [-n <nrthreads>] [-l <logdir>] [-t <timeout>]\n", argv[0]);
+			exit(0);
+			break;
+		case 'n':
+			nrthreads = strtoul(optarg, NULL, 10);
+			break;
+		case 'l':
+			strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
+			break;
+		case 't':
+			run_time = strtoul(optarg, NULL, 10);
+			break;
+		default:
+			printf("invalid option\n");
+			exit(0);
+			break;
+		}
+	}
+
+	if (nrthreads > MAX_THREADS)
+		nrthreads = MAX_THREADS;
+
+	shmid = shmget(shm_key, page_size, IPC_CREAT|0666);
+	if (shmid < 0) {
+		err_msg("Failed shmget\n");
+	}
+
+	map1 = shmat(shmid, NULL, 0);
+	if (map1 == (void *) -1) {
+		err_msg("Failed shmat");
+	}
+
+	map2 = shmat(shmid, NULL, 0);
+	if (map2 == (void *) -1) {
+		err_msg("Failed shmat");
+	}
+
+	dir_error = mkdir(logdir, 0755);
+
+	if (dir_error) {
+		err_msg("Failed mkdir");
+	}
+
+	printf("start_cpu list:%lu\n", start_cpu);
+	printf("number of worker threads:%lu + 1 snapshot thread\n", nrthreads);
+	printf("Allocated address:0x%016lx + secondary map:0x%016lx\n", (unsigned long)map1, (unsigned long)map2);
+	printf("logdir at : %s\n", logdir);
+	printf("Timeout: %d seconds\n", run_time);
+
+	time(&now);
+	printf("=================================\n");
+	printf("     Starting Test\n");
+	printf("     %s", ctime(&now));
+	printf("=================================\n");
+
+	for (i = 0; i < nrthreads; i++) {
+		if (1 && !fork()) {
+			prctl(PR_SET_PDEATHSIG, SIGKILL);
+			set_mycpu(start_cpu + i);
+			for (;;)
+				sched_yield();
+			exit(0);
+		}
+	}
+
+
+	sa_alrm.sa_handler = &alrm_sighandler;
+	sigemptyset(&sa_alrm.sa_mask);
+	sa_alrm.sa_flags = 0;
+
+	if (sigaction(SIGALRM, &sa_alrm, 0) == -1) {
+		err_msg("Failed signal handler registration\n");
+	}
+
+	alarm(run_time);
+
+	pthread_attr_init(&attr);
+	for (i = 0; i < nrthreads; i++) {
+		rim_thread_ids[i] = i;
+		pthread_create(&rim_threads[i], &attr, rim_fn, &rim_thread_ids[i]);
+		set_pthread_cpu(rim_threads[i], start_cpu + i);
+	}
+
+	pthread_create(&mem_snapshot_thread, &attr, mem_snapshot_fn, map1);
+	set_pthread_cpu(mem_snapshot_thread, start_cpu + i);
+
+
+	pthread_join(mem_snapshot_thread, NULL);
+	for (i = 0; i < nrthreads; i++) {
+		pthread_join(rim_threads[i], NULL);
+	}
+
+	if (!timeout) {
+		time(&now);
+		printf("=================================\n");
+		printf("      Data Corruption Detected\n");
+		printf("      %s", ctime(&now));
+		printf("      See logfiles in %s\n", logdir);
+		printf("=================================\n");
+		return 1;
+	}
+	return 0;
+}
-- 
2.21.0

Re: [PATCH 1/4] powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions

[Michael Ellerman]

On Tue, 2019-09-24 at 03:52:51 UTC, "Aneesh Kumar K.V" wrote:
> The store ordering vs tlbie issue mentioned in
> commit a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
> POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't need
> to apply the fixup if we are running on them
> 
> We can only do this on PowerNV. On pseries guest with kvm we still don't
> support redoing the feature fixup after migration. So we should be enabling
> all the workarounds needed, because whe can possibly migrate between
> DD 2.3 and DD 2.2
> 
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

Series applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/677733e296b5c7a37c47da391fc70a43dc40bd67

cheers