[Very RFC 01/46] powerpc/eeh: Don't attempt to restore VF config space after reset

[Oliver O'Halloran <oohall@gmail.com>]

After resetting a VF we call eeh_restore_vf_config() to restore several
registers in the VFs config space. For physical functions this is normally
handled by the pci_reinit_device() OPAL call which requests firmware to
re-program the device with whatever defaults were set at boot time. We
can't use that for VFs since OPAL (being firmware) doesn't know (or care)
about VFs.

However, the fields that are restored here are all marked as reserved for
VFs in the SR-IOV spec. In other words, eeh_restore_vf_config() doesn't
actually do anything.

There is an argument to be made that we should be saving and restoring
some of these fields since they are marked as "Reserved, but Preserve"
(ResvP) to allow these fields to be used in new versions of the SR-IOV.
However, the current code doesn't even do that properly since it assumes
they can be set to whatever the EEH core has assumed to be correct. If
the fields *are* used in future versions of the SR-IOV spec this code
is still broken since it doesn't take into account any changes made
by the driver, or the Linux IOV core.

Given the above, just delete the code. It's broken, it's mis-leading,
and it's getting in the way of doing useful cleanups.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
 arch/powerpc/kernel/eeh.c                    | 59 --------------------
 arch/powerpc/platforms/powernv/eeh-powernv.c | 39 +++----------
 arch/powerpc/platforms/pseries/eeh_pseries.c | 26 +--------
 3 files changed, 8 insertions(+), 116 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ae0a9c421d7b..a3b93db972fc 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -742,65 +742,6 @@ static void eeh_restore_dev_state(struct eeh_dev *edev, void *userdata)
 		pci_restore_state(pdev);
 }
 
-int eeh_restore_vf_config(struct pci_dn *pdn)
-{
-	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
-	u32 devctl, cmd, cap2, aer_capctl;
-	int old_mps;
-
-	if (edev->pcie_cap) {
-		/* Restore MPS */
-		old_mps = (ffs(pdn->mps) - 8) << 5;
-		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
-				     2, &devctl);
-		devctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
-		devctl |= old_mps;
-		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
-				      2, devctl);
-
-		/* Disable Completion Timeout if possible */
-		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP2,
-				     4, &cap2);
-		if (cap2 & PCI_EXP_DEVCAP2_COMP_TMOUT_DIS) {
-			eeh_ops->read_config(pdn,
-					     edev->pcie_cap + PCI_EXP_DEVCTL2,
-					     4, &cap2);
-			cap2 |= PCI_EXP_DEVCTL2_COMP_TMOUT_DIS;
-			eeh_ops->write_config(pdn,
-					      edev->pcie_cap + PCI_EXP_DEVCTL2,
-					      4, cap2);
-		}
-	}
-
-	/* Enable SERR and parity checking */
-	eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd);
-	cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
-	eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd);
-
-	/* Enable report various errors */
-	if (edev->pcie_cap) {
-		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
-				     2, &devctl);
-		devctl &= ~PCI_EXP_DEVCTL_CERE;
-		devctl |= (PCI_EXP_DEVCTL_NFERE |
-			   PCI_EXP_DEVCTL_FERE |
-			   PCI_EXP_DEVCTL_URRE);
-		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
-				      2, devctl);
-	}
-
-	/* Enable ECRC generation and check */
-	if (edev->pcie_cap && edev->aer_cap) {
-		eeh_ops->read_config(pdn, edev->aer_cap + PCI_ERR_CAP,
-				     4, &aer_capctl);
-		aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
-		eeh_ops->write_config(pdn, edev->aer_cap + PCI_ERR_CAP,
-				      4, aer_capctl);
-	}
-
-	return 0;
-}
-
 /**
  * pcibios_set_pcie_reset_state - Set PCI-E reset state
  * @dev: pci device struct
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index ef727ecd99cd..b2ac4130fda7 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -1649,20 +1649,13 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn)
 	if (!edev)
 		return -EEXIST;
 
-	/*
-	 * We have to restore the PCI config space after reset since the
-	 * firmware can't see SRIOV VFs.
-	 *
-	 * FIXME: The MPS, error routing rules, timeout setting are worthy
-	 * to be exported by firmware in extendible way.
-	 */
-	if (edev->physfn) {
-		ret = eeh_restore_vf_config(pdn);
-	} else {
-		phb = pdn->phb->private_data;
-		ret = opal_pci_reinit(phb->opal_id,
-				      OPAL_REINIT_PCI_DEV, config_addr);
-	}
+	/* Nothing to do for VFs */
+	if (edev->physfn)
+		return 0;
+
+	phb = pdn->phb->private_data;
+	ret = opal_pci_reinit(phb->opal_id,
+			      OPAL_REINIT_PCI_DEV, config_addr);
 
 	if (ret) {
 		pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
@@ -1691,24 +1684,6 @@ static struct eeh_ops pnv_eeh_ops = {
 	.notify_resume		= NULL
 };
 
-#ifdef CONFIG_PCI_IOV
-static void pnv_pci_fixup_vf_mps(struct pci_dev *pdev)
-{
-	struct pci_dn *pdn = pci_get_pdn(pdev);
-	int parent_mps;
-
-	if (!pdev->is_virtfn)
-		return;
-
-	/* Synchronize MPS for VF and PF */
-	parent_mps = pcie_get_mps(pdev->physfn);
-	if ((128 << pdev->pcie_mpss) >= parent_mps)
-		pcie_set_mps(pdev, parent_mps);
-	pdn->mps = pcie_get_mps(pdev);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_mps);
-#endif /* CONFIG_PCI_IOV */
-
 /**
  * eeh_powernv_init - Register platform dependent EEH operations
  *
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 95bbf9102584..fa704d7052ec 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -657,30 +657,6 @@ static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32
 	return rtas_write_config(pdn, where, size, val);
 }
 
-static int pseries_eeh_restore_config(struct pci_dn *pdn)
-{
-	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
-	s64 ret = 0;
-
-	if (!edev)
-		return -EEXIST;
-
-	/*
-	 * FIXME: The MPS, error routing rules, timeout setting are worthy
-	 * to be exported by firmware in extendible way.
-	 */
-	if (edev->physfn)
-		ret = eeh_restore_vf_config(pdn);
-
-	if (ret) {
-		pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
-			__func__, edev->pe_config_addr, ret);
-		return -EIO;
-	}
-
-	return ret;
-}
-
 #ifdef CONFIG_PCI_IOV
 int pseries_send_allow_unfreeze(struct pci_dn *pdn,
 				u16 *vf_pe_array, int cur_vfs)
@@ -786,7 +762,7 @@ static struct eeh_ops pseries_eeh_ops = {
 	.read_config		= pseries_eeh_read_config,
 	.write_config		= pseries_eeh_write_config,
 	.next_error		= NULL,
-	.restore_config		= pseries_eeh_restore_config,
+	.restore_config		= NULL,
 #ifdef CONFIG_PCI_IOV
 	.notify_resume		= pseries_notify_resume
 #endif
-- 
2.21.0