linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Frederic Barrat <fbarrat@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, andrew.donnellan@au1.ibm.com,
	clombard@linux.ibm.com
Cc: groug@kaod.org, alastair@au1.ibm.com
Subject: [PATCH v2 00/11] opencapi: enable card reset and link retraining
Date: Thu, 21 Nov 2019 14:49:07 +0100	[thread overview]
Message-ID: <20191121134918.7155-1-fbarrat@linux.ibm.com> (raw)

This is the linux part of the work to use the PCI hotplug framework to
control an opencapi card so that it can be reset and re-read after
flashing a new FPGA image. The changes required in skiboot are now
upstream. On an old skiboot, this series will do nothing.

A virtual PCI slot is created for the opencapi adapter and its state
can be controlled through the pnv-php hotplug driver:

  echo 0|1 > /sys/bus/pci/slots/OPENCAPI-<...>/power

Note that the power to the card is not really turned off, as the card
needs to stay on to be flashed with a new image. Instead the card is
in reset.

The first part of the series mostly deals with the pci/ioda state, as
the opencapi devices can now go away and the state needs to be cleaned
up.

The second part is modifications to the PCI hotplug driver on powernv,
so that a virtual slot is created for the opencapi adapters found in
the device tree.


Changelog:
v2:
 - rebase on latest kernel
 - clarify the ref counting done for NPU devices when the PE is setup
 - address comments from Andrew and Alastair


Frederic Barrat (11):
  powerpc/powernv/ioda: Fix ref count for devices with their own PE
  powerpc/powernv/ioda: Protect PE list
  powerpc/powernv/ioda: set up PE on opencapi device when enabling
  powerpc/powernv/ioda: Release opencapi device
  powerpc/powernv/ioda: Find opencapi slot for a device node
  pci/hotplug/pnv-php: Remove erroneous warning
  pci/hotplug/pnv-php: Improve error msg on power state change failure
  pci/hotplug/pnv-php: Register opencapi slots
  pci/hotplug/pnv-php: Relax check when disabling slot
  pci/hotplug/pnv-php: Wrap warnings in macro
  ocxl: Add PCI hotplug dependency to Kconfig

 arch/powerpc/include/asm/pnv-pci.h        |   1 +
 arch/powerpc/platforms/powernv/pci-ioda.c | 115 +++++++++++++++-------
 arch/powerpc/platforms/powernv/pci.c      |  24 +++--
 drivers/misc/ocxl/Kconfig                 |   1 +
 drivers/pci/hotplug/pnv_php.c             |  82 ++++++++-------
 5 files changed, 145 insertions(+), 78 deletions(-)

-- 
2.21.0


             reply	other threads:[~2019-11-21 13:51 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21 13:49 Frederic Barrat [this message]
2019-11-21 13:49 ` [PATCH v2 01/11] powerpc/powernv/ioda: Fix ref count for devices with their own PE Frederic Barrat
2020-01-08  7:33   ` Andrew Donnellan
2020-01-08 14:11     ` Frederic Barrat
2020-01-08 20:19       ` Andrew Donnellan
2020-01-29  5:17   ` Michael Ellerman
2019-11-21 13:49 ` [PATCH v2 02/11] powerpc/powernv/ioda: Protect PE list Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 03/11] powerpc/powernv/ioda: set up PE on opencapi device when enabling Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 04/11] powerpc/powernv/ioda: Release opencapi device Frederic Barrat
2019-11-22  5:22   ` Andrew Donnellan
2019-11-21 13:49 ` [PATCH v2 05/11] powerpc/powernv/ioda: Find opencapi slot for a device node Frederic Barrat
2019-11-22  4:27   ` Andrew Donnellan
2019-11-21 13:49 ` [PATCH v2 06/11] pci/hotplug/pnv-php: Remove erroneous warning Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 07/11] pci/hotplug/pnv-php: Improve error msg on power state change failure Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 08/11] pci/hotplug/pnv-php: Register opencapi slots Frederic Barrat
2019-11-22  4:33   ` Andrew Donnellan
2019-11-21 13:49 ` [PATCH v2 09/11] pci/hotplug/pnv-php: Relax check when disabling slot Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 10/11] pci/hotplug/pnv-php: Wrap warnings in macro Frederic Barrat
2019-11-21 13:49 ` [PATCH v2 11/11] ocxl: Add PCI hotplug dependency to Kconfig Frederic Barrat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121134918.7155-1-fbarrat@linux.ibm.com \
    --to=fbarrat@linux.ibm.com \
    --cc=alastair@au1.ibm.com \
    --cc=andrew.donnellan@au1.ibm.com \
    --cc=clombard@linux.ibm.com \
    --cc=groug@kaod.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).