[PATCH AUTOSEL 4.9 37/91] powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[PATCH AUTOSEL 4.9 37/91] powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit e93ba1b7eb5b188c749052df7af1c90821c5f320 ]

This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/ppc_mmu_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 2a049fb8523d5..96c52271e9c2d 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -52,7 +52,7 @@ struct batrange {		/* stores address ranges mapped by BATs */
 phys_addr_t v_block_mapped(unsigned long va)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
 			return bat_addrs[b].phys + (va - bat_addrs[b].start);
 	return 0;
@@ -64,7 +64,7 @@ phys_addr_t v_block_mapped(unsigned long va)
 unsigned long p_block_mapped(phys_addr_t pa)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (pa >= bat_addrs[b].phys
 	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
 		              +bat_addrs[b].phys)
-- 
2.20.1

[PATCH AUTOSEL 4.9 38/91] powerpc/xmon: fix dump_segments()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 32c8c4c621897199e690760c2d57054f8b84b6e6 ]

mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 687e8b8bf5c67..899288b71145e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -3043,7 +3043,7 @@ void dump_segments(void)
 
 	printf("sr0-15 =");
 	for (i = 0; i < 16; ++i)
-		printf(" %x", mfsrin(i));
+		printf(" %x", mfsrin(i << 28));
 	printf("\n");
 }
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.9 47/91] powerpc/prom: fix early DEBUG messages

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index b0245bed6f548..b868f07c4246c 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -128,7 +128,7 @@ static void __init move_device_tree(void)
 		p = __va(memblock_alloc(size, PAGE_SIZE));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = p;
-		DBG("Moved device tree to 0x%p\n", p);
+		DBG("Moved device tree to 0x%px\n", p);
 	}
 
 	DBG("<- move_device_tree\n");
@@ -651,7 +651,7 @@ void __init early_init_devtree(void *params)
 {
 	phys_addr_t limit;
 
-	DBG(" -> early_init_devtree(%p)\n", params);
+	DBG(" -> early_init_devtree(%px)\n", params);
 
 	/* Too early to BUG_ON(), do it by hand */
 	if (!early_init_dt_verify(params))
@@ -711,7 +711,7 @@ void __init early_init_devtree(void *params)
 	memblock_allow_resize();
 	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
+	DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
-- 
2.20.1

[PATCH AUTOSEL 4.9 48/91] powerpc/mm: Make NULL pointer deferences explicit on bad page faults.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/fault.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 9376e8e53bfae..2791f568bdb25 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -521,21 +521,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 	switch (regs->trap) {
 	case 0x300:
 	case 0x380:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"data at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: %s at 0x%08lx\n",
+			 regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
+			 "Unable to handle kernel data access", regs->dar);
 		break;
 	case 0x400:
 	case 0x480:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"instruction fetch\n");
+		pr_alert("BUG: Unable to handle kernel instruction fetch%s",
+			 regs->nip < PAGE_SIZE ? " (NULL pointer?)\n" : "\n");
 		break;
 	case 0x600:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unaligned access at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: Unable to handle kernel unaligned access at 0x%08lx\n",
+			 regs->dar);
 		break;
 	default:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unknown fault\n");
+		pr_alert("BUG: Unable to handle unknown paging fault at 0x%08lx\n",
+			 regs->dar);
 		break;
 	}
 	printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
-- 
2.20.1

[PATCH AUTOSEL 4.9 49/91] powerpc/44x/bamboo: Fix PCI range

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/bamboo.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index aa68911f6560a..084b82ba74933 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -268,8 +268,10 @@
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
+			 * The chip also supports a larger memory range but
+			 * it's not naturally aligned, so our code will break
 			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
 				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 51/91] powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]

The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.

This initializes pcierr and fstate to zero in all call sites.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 8 ++++----
 arch/powerpc/platforms/powernv/pci-ioda.c    | 4 ++--
 arch/powerpc/platforms/powernv/pci.c         | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 2354ea51e8714..6189c4cf56c3f 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -546,8 +546,8 @@ static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
 static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
 	s64 rc;
 	int result = 0;
 
@@ -585,8 +585,8 @@ static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
 static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb->private_data;
-	u8 fstate;
-	__be16 pcierr;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
 	s64 rc;
 	int result;
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 8015e40bc7ee4..3ec673b4ca6ce 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -599,8 +599,8 @@ static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt)
 static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no)
 {
 	struct pnv_ioda_pe *slave, *pe;
-	u8 fstate, state;
-	__be16 pcierr;
+	u8 fstate = 0, state;
+	__be16 pcierr = 0;
 	s64 rc;
 
 	/* Sanity check on PE number */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index db7b8020f68ef..98cc8ba07c233 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -482,8 +482,8 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
 static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 {
 	struct pnv_phb *phb = pdn->phb->private_data;
-	u8	fstate;
-	__be16	pcierr;
+	u8	fstate = 0;
+	__be16	pcierr = 0;
 	unsigned int pe_no;
 	s64	rc;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 57/91] powerpc/83xx: handle machine check caused by watchdog timer

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]

When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.

This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/cputable.h |  1 +
 arch/powerpc/include/asm/reg.h      |  2 ++
 arch/powerpc/kernel/cputable.c      | 10 ++++++----
 arch/powerpc/platforms/83xx/misc.c  | 17 +++++++++++++++++
 4 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 4e54282c29b44..cf51aea47510c 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -44,6 +44,7 @@ extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
 extern int machine_check_47x(struct pt_regs *regs);
 int machine_check_8xx(struct pt_regs *regs);
+int machine_check_83xx(struct pt_regs *regs);
 
 extern void cpu_down_flush_e500v2(void);
 extern void cpu_down_flush_e500mc(void);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index ceb168cd3b814..26aeeaad32678 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -663,6 +663,8 @@
 #define   SRR1_PROGTRAP		0x00020000 /* Trap */
 #define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
 
+#define   SRR1_MCE_MCP		0x00080000 /* Machine check signal caused interrupt */
+
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
 #define   HSRR1_DENORM		0x00100000 /* Denorm exception */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 6a82ef039c509..7471ed48f41fa 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1162,6 +1162,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc603",
 	},
+#ifdef CONFIG_PPC_83xx
 	{	/* e300c1 (a 603e core, plus some) on 83xx */
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00830000,
@@ -1172,7 +1173,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.platform		= "ppc603",
 	},
 	{	/* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
@@ -1186,7 +1187,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.platform		= "ppc603",
 	},
 	{	/* e300c3 (e300c1, plus one IU, half cache size) on 83xx */
@@ -1200,7 +1201,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
@@ -1217,12 +1218,13 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
-		.machine_check		= machine_check_generic,
+		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
+#endif
 	{	/* default match, we assume split I/D cache & TB (non-601)... */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index d75c9816a5c92..2b6589fe812dd 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -14,6 +14,7 @@
 #include <linux/of_platform.h>
 #include <linux/pci.h>
 
+#include <asm/debug.h>
 #include <asm/io.h>
 #include <asm/hw_irq.h>
 #include <asm/ipic.h>
@@ -150,3 +151,19 @@ void __init mpc83xx_setup_arch(void)
 
 	mpc83xx_setup_pci();
 }
+
+int machine_check_83xx(struct pt_regs *regs)
+{
+	u32 mask = 1 << (31 - IPIC_MCP_WDT);
+
+	if (!(regs->msr & SRR1_MCE_MCP) || !(ipic_get_mcp_status() & mask))
+		return machine_check_generic(regs);
+	ipic_clear_mcp_status(mask);
+
+	if (debugger_fault_handler(regs))
+		return 1;
+
+	die("Watchdog NMI Reset", regs, 0);
+
+	return 1;
+}
-- 
2.20.1

[PATCH AUTOSEL 4.9 58/91] powerpc/pseries: Fix node leak in update_lmb_associativity_index()

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 47918bc68b7427e961035949cc1501a864578a69 ]

In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/hotplug-memory.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c0a0947f43bbb..e65ef3067afb5 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -294,6 +294,7 @@ static u32 lookup_lmb_associativity_index(struct of_drconf_cell *lmb)
 
 	aa_index = find_aa_index(dr_node, ala_prop, lmb_assoc);
 
+	of_node_put(dr_node);
 	dlpar_free_cc_nodes(lmb_node);
 	return aa_index;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 67/91] net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]

This patch fixes potential double frees if register_hdlc_device() fails.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 7a62316c570d2..b2c1e872d5ed5 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -1117,7 +1117,6 @@ static int ucc_hdlc_probe(struct platform_device *pdev)
 	if (register_hdlc_device(dev)) {
 		ret = -ENOBUFS;
 		pr_err("ucc_hdlc: unable to register hdlc device\n");
-		free_netdev(dev);
 		goto free_dev;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 90/91] powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property()

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit efa9ace68e487ddd29c2b4d6dd23242158f1f607 ]

In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup().
kstrdup() may return NULL, so it should be checked and handle error.
And prop should be freed if 'prop->name' is NULL.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 999b04819d699..5abb8e2239a54 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -63,6 +63,10 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
 
 	name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
 	prop->name = kstrdup(name, GFP_KERNEL);
+	if (!prop->name) {
+		dlpar_free_cc_property(prop);
+		return NULL;
+	}
 
 	prop->length = be32_to_cpu(ccwa->prop_length);
 	value = (char *)ccwa + be32_to_cpu(ccwa->prop_offset);
-- 
2.20.1