[PATCH AUTOSEL 4.4 30/68] powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[PATCH AUTOSEL 4.4 30/68] powerpc/book3s/32: fix number of bats in p/v_block_mapped()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit e93ba1b7eb5b188c749052df7af1c90821c5f320 ]

This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/ppc_mmu_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 6b2f3e457171a..ae0f157d201c6 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -52,7 +52,7 @@ struct batrange {		/* stores address ranges mapped by BATs */
 phys_addr_t v_mapped_by_bats(unsigned long va)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
 			return bat_addrs[b].phys + (va - bat_addrs[b].start);
 	return 0;
@@ -64,7 +64,7 @@ phys_addr_t v_mapped_by_bats(unsigned long va)
 unsigned long p_mapped_by_bats(phys_addr_t pa)
 {
 	int b;
-	for (b = 0; b < 4; ++b)
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
 		if (pa >= bat_addrs[b].phys
 	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
 		              +bat_addrs[b].phys)
-- 
2.20.1

[PATCH AUTOSEL 4.4 31/68] powerpc/xmon: fix dump_segments()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 32c8c4c621897199e690760c2d57054f8b84b6e6 ]

mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 83619ebede93d..dc2ebc20a96f8 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2840,7 +2840,7 @@ void dump_segments(void)
 
 	printf("sr0-15 =");
 	for (i = 0; i < 16; ++i)
-		printf(" %x", mfsrin(i));
+		printf(" %x", mfsrin(i << 28));
 	printf("\n");
 }
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.4 40/68] powerpc/prom: fix early DEBUG messages

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index a15fe1d4e84ae..04a27307a2c4d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -125,7 +125,7 @@ static void __init move_device_tree(void)
 		p = __va(memblock_alloc(size, PAGE_SIZE));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = p;
-		DBG("Moved device tree to 0x%p\n", p);
+		DBG("Moved device tree to 0x%px\n", p);
 	}
 
 	DBG("<- move_device_tree\n");
@@ -647,7 +647,7 @@ void __init early_init_devtree(void *params)
 {
 	phys_addr_t limit;
 
-	DBG(" -> early_init_devtree(%p)\n", params);
+	DBG(" -> early_init_devtree(%px)\n", params);
 
 	/* Too early to BUG_ON(), do it by hand */
 	if (!early_init_dt_verify(params))
@@ -707,7 +707,7 @@ void __init early_init_devtree(void *params)
 	memblock_allow_resize();
 	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
+	DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
-- 
2.20.1

[PATCH AUTOSEL 4.4 41/68] powerpc/mm: Make NULL pointer deferences explicit on bad page faults.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/fault.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index d154e333f76b7..d1f860ca03ade 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -521,21 +521,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 	switch (regs->trap) {
 	case 0x300:
 	case 0x380:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"data at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: %s at 0x%08lx\n",
+			 regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
+			 "Unable to handle kernel data access", regs->dar);
 		break;
 	case 0x400:
 	case 0x480:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"instruction fetch\n");
+		pr_alert("BUG: Unable to handle kernel instruction fetch%s",
+			 regs->nip < PAGE_SIZE ? " (NULL pointer?)\n" : "\n");
 		break;
 	case 0x600:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unaligned access at address 0x%08lx\n", regs->dar);
+		pr_alert("BUG: Unable to handle kernel unaligned access at 0x%08lx\n",
+			 regs->dar);
 		break;
 	default:
-		printk(KERN_ALERT "Unable to handle kernel paging request for "
-			"unknown fault\n");
+		pr_alert("BUG: Unable to handle unknown paging fault at 0x%08lx\n",
+			 regs->dar);
 		break;
 	}
 	printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
-- 
2.20.1

[PATCH AUTOSEL 4.4 42/68] powerpc/44x/bamboo: Fix PCI range

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/bamboo.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index aa68911f6560a..084b82ba74933 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -268,8 +268,10 @@
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
+			 * The chip also supports a larger memory range but
+			 * it's not naturally aligned, so our code will break
 			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
 				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 67/68] powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property()

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit efa9ace68e487ddd29c2b4d6dd23242158f1f607 ]

In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup().
kstrdup() may return NULL, so it should be checked and handle error.
And prop should be freed if 'prop->name' is NULL.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a8efed3b46916..551ba5b35df9d 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -55,6 +55,10 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
 
 	name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
 	prop->name = kstrdup(name, GFP_KERNEL);
+	if (!prop->name) {
+		dlpar_free_cc_property(prop);
+		return NULL;
+	}
 
 	prop->length = be32_to_cpu(ccwa->prop_length);
 	value = (char *)ccwa + be32_to_cpu(ccwa->prop_offset);
-- 
2.20.1