linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Phil Auld <pauld@redhat.com>
To: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>,
	Parth Shah <parth@linux.ibm.com>,
	"Gautham R . Shenoy" <ego@linux.vnet.ibm.com>,
	Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>,
	Waiman Long <longman@redhat.com>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH v3 1/2] powerpc/vcpu: Assume dedicated processors as non-preempt
Date: Thu, 5 Dec 2019 08:48:03 -0500	[thread overview]
Message-ID: <20191205134803.GA18693@lorien.usersys.redhat.com> (raw)
In-Reply-To: <20191205083218.25824-1-srikar@linux.vnet.ibm.com>

On Thu, Dec 05, 2019 at 02:02:17PM +0530 Srikar Dronamraju wrote:
> With commit 247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted
> vCPUs"), scheduler avoids preempted vCPUs to schedule tasks on wakeup.
> This leads to wrong choice of CPU, which in-turn leads to larger wakeup
> latencies. Eventually, it leads to performance regression in latency
> sensitive benchmarks like soltp, schbench etc.
> 
> On Powerpc, vcpu_is_preempted only looks at yield_count. If the
> yield_count is odd, the vCPU is assumed to be preempted. However
> yield_count is increased whenever LPAR enters CEDE state. So any CPU
> that has entered CEDE state is assumed to be preempted.
> 
> Even if vCPU of dedicated LPAR is preempted/donated, it should have
> right of first-use since they are suppose to own the vCPU.
> 
> On a Power9 System with 32 cores
>  # lscpu
> Architecture:        ppc64le
> Byte Order:          Little Endian
> CPU(s):              128
> On-line CPU(s) list: 0-127
> Thread(s) per core:  8
> Core(s) per socket:  1
> Socket(s):           16
> NUMA node(s):        2
> Model:               2.2 (pvr 004e 0202)
> Model name:          POWER9 (architected), altivec supported
> Hypervisor vendor:   pHyp
> Virtualization type: para
> L1d cache:           32K
> L1i cache:           32K
> L2 cache:            512K
> L3 cache:            10240K
> NUMA node0 CPU(s):   0-63
> NUMA node1 CPU(s):   64-127
> 
>   # perf stat -a -r 5 ./schbench
> v5.4                                     v5.4 + patch
> Latency percentiles (usec)               Latency percentiles (usec)
> 	50.0000th: 45                    	50.0000th: 39
> 	75.0000th: 62                    	75.0000th: 53
> 	90.0000th: 71                    	90.0000th: 67
> 	95.0000th: 77                    	95.0000th: 76
> 	*99.0000th: 91                   	*99.0000th: 89
> 	99.5000th: 707                   	99.5000th: 93
> 	99.9000th: 6920                  	99.9000th: 118
> 	min=0, max=10048                 	min=0, max=211
> Latency percentiles (usec)               Latency percentiles (usec)
> 	50.0000th: 45                    	50.0000th: 34
> 	75.0000th: 61                    	75.0000th: 45
> 	90.0000th: 72                    	90.0000th: 53
> 	95.0000th: 79                    	95.0000th: 56
> 	*99.0000th: 691                  	*99.0000th: 61
> 	99.5000th: 3972                  	99.5000th: 63
> 	99.9000th: 8368                  	99.9000th: 78
> 	min=0, max=16606                 	min=0, max=228
> Latency percentiles (usec)               Latency percentiles (usec)
> 	50.0000th: 45                    	50.0000th: 34
> 	75.0000th: 61                    	75.0000th: 45
> 	90.0000th: 71                    	90.0000th: 53
> 	95.0000th: 77                    	95.0000th: 57
> 	*99.0000th: 106                  	*99.0000th: 63
> 	99.5000th: 2364                  	99.5000th: 68
> 	99.9000th: 7480                  	99.9000th: 100
> 	min=0, max=10001                 	min=0, max=134
> Latency percentiles (usec)               Latency percentiles (usec)
> 	50.0000th: 45                    	50.0000th: 34
> 	75.0000th: 62                    	75.0000th: 46
> 	90.0000th: 72                    	90.0000th: 53
> 	95.0000th: 78                    	95.0000th: 56
> 	*99.0000th: 93                   	*99.0000th: 61
> 	99.5000th: 108                   	99.5000th: 64
> 	99.9000th: 6792                  	99.9000th: 85
> 	min=0, max=17681                 	min=0, max=121
> Latency percentiles (usec)               Latency percentiles (usec)
> 	50.0000th: 46                    	50.0000th: 33
> 	75.0000th: 62                    	75.0000th: 44
> 	90.0000th: 73                    	90.0000th: 51
> 	95.0000th: 79                    	95.0000th: 54
> 	*99.0000th: 113                  	*99.0000th: 61
> 	99.5000th: 2724                  	99.5000th: 64
> 	99.9000th: 6184                  	99.9000th: 82
> 	min=0, max=9887                  	min=0, max=121
> 
>  Performance counter stats for 'system wide' (5 runs):
> 
> context-switches    43,373  ( +-  0.40% )   44,597 ( +-  0.55% )
> cpu-migrations       1,211  ( +-  5.04% )      220 ( +-  6.23% )
> page-faults         15,983  ( +-  5.21% )   15,360 ( +-  3.38% )
> 
> Waiman Long suggested using static_keys.
> 
> Reported-by: Parth Shah <parth@linux.ibm.com>
> Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
> Cc: Parth Shah <parth@linux.ibm.com>
> Cc: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
> Cc: Juri Lelli <juri.lelli@redhat.com>
> Cc: Phil Auld <pauld@redhat.com>
> Cc: Waiman Long <longman@redhat.com>
> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> Tested-by: Juri Lelli <juri.lelli@redhat.com>
> Ack-by: Waiman Long <longman@redhat.com>
> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
> ---
> Changelog v1 (https://patchwork.ozlabs.org/patch/1204190/) ->v3:
> Code is now under CONFIG_PPC_SPLPAR as it depends on CONFIG_PPC_PSERIES.
> This was suggested by Waiman Long.
> 
>  arch/powerpc/include/asm/spinlock.h | 5 +++--
>  arch/powerpc/mm/numa.c              | 4 ++++
>  2 files changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
> index e9a960e28f3c..de817c25deff 100644
> --- a/arch/powerpc/include/asm/spinlock.h
> +++ b/arch/powerpc/include/asm/spinlock.h
> @@ -35,11 +35,12 @@
>  #define LOCK_TOKEN	1
>  #endif
>  
> -#ifdef CONFIG_PPC_PSERIES
> +#ifdef CONFIG_PPC_SPLPAR
> +DECLARE_STATIC_KEY_FALSE(shared_processor);
>  #define vcpu_is_preempted vcpu_is_preempted
>  static inline bool vcpu_is_preempted(int cpu)
>  {
> -	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
> +	if (!static_branch_unlikely(&shared_processor))
>  		return false;
>  	return !!(be32_to_cpu(lppaca_of(cpu).yield_count) & 1);
>  }
> diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
> index 50d68d21ddcc..ffb971f3a63c 100644
> --- a/arch/powerpc/mm/numa.c
> +++ b/arch/powerpc/mm/numa.c
> @@ -1568,9 +1568,13 @@ int prrn_is_enabled(void)
>  	return prrn_enabled;
>  }
>  
> +DEFINE_STATIC_KEY_FALSE(shared_processor);
> +EXPORT_SYMBOL_GPL(shared_processor);
> +
>  void __init shared_proc_topology_init(void)
>  {
>  	if (lppaca_shared_proc(get_lppaca())) {
> +		static_branch_enable(&shared_processor);
>  		bitmap_fill(cpumask_bits(&cpu_associativity_changes_mask),
>  			    nr_cpumask_bits);
>  		numa_update_cpu_topology(false);
> -- 
> 2.18.1
>

This looks good to me, thanks Srikar.

Acked-by: Phil Auld <pauld@redhat.com>
-- 


  parent reply	other threads:[~2019-12-05 20:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-05  8:32 [PATCH v3 1/2] powerpc/vcpu: Assume dedicated processors as non-preempt Srikar Dronamraju
2019-12-05  8:32 ` [PATCH v3 2/2] powerpc/shared: Use static key to detect shared processor Srikar Dronamraju
2019-12-05 13:51   ` Phil Auld
2019-12-05 14:57   ` Waiman Long
2019-12-05 13:48 ` Phil Auld [this message]
2019-12-06  9:34 ` [PATCH v3 1/2] powerpc/vcpu: Assume dedicated processors as non-preempt Vaidyanathan Srinivasan
2019-12-09  8:26 ` Parth Shah
2019-12-11 14:52 ` Waiman Long

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191205134803.GA18693@lorien.usersys.redhat.com \
    --to=pauld@redhat.com \
    --cc=Ihor.Pasichnyk@ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=juri.lelli@redhat.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=longman@redhat.com \
    --cc=parth@linux.ibm.com \
    --cc=srikar@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).