[PATCH AUTOSEL 4.19 13/79] powerpc/pseries: Mark accumulate_stolen_time() as notrace

[PATCH AUTOSEL 4.19 13/79] powerpc/pseries: Mark accumulate_stolen_time() as notrace

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ]

accumulate_stolen_time() is called prior to interrupt state being
reconciled, which can trip the warning in arch_local_irq_restore():

  WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
  ...
  NIP .arch_local_irq_restore+0x9c/0x130
  LR  .rb_start_commit+0x38/0x80
  Call Trace:
    .ring_buffer_lock_reserve+0xe4/0x620
    .trace_function+0x44/0x210
    .function_trace_call+0x148/0x170
    .ftrace_ops_no_ops+0x180/0x1d0
    ftrace_call+0x4/0x8
    .accumulate_stolen_time+0x1c/0xb0
    decrementer_common+0x124/0x160

For now just mark it as notrace. We may change the ordering to call it
after interrupt state has been reconciled, but that is a larger
change.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024055932.27940-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 7707990c4c169..02ae92c224800 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -235,7 +235,7 @@ static u64 scan_dispatch_log(u64 stop_tb)
  * Accumulate stolen time by scanning the dispatch trace log.
  * Called on entry from user mode.
  */
-void accumulate_stolen_time(void)
+void notrace accumulate_stolen_time(void)
 {
 	u64 sst, ust;
 	unsigned long save_irq_soft_mask = irq_soft_mask_return();
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/79] powerpc/pseries: Don't fail hash page table insert for bolted mapping

[Sasha Levin]

From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>

[ Upstream commit 75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]

If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table
insert by removing a random entry from the group.

After some runtime, it is very well possible to find all the 8 hash page table
entry slot in the hpte group used for mapping. Don't fail a bolted entry insert
in that case. With Storage class memory a user can find this error easily since
a namespace enable/disable is equivalent to memory add/remove.

This results in failures as reported below:

$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
  Error: namespace1.2: failed to enable

failed to create namespace: No such device or address

In kernel log we find the details as below:

Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14

This indicates that we failed to create a bolted hash table entry for direct-map
address backing the namespace.

We also observe failures such that not all namespaces will be enabled with
ndctl enable-namespace all command.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/hash_utils_64.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index b1007e9a31ba7..11b41383e1672 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -296,7 +296,14 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
 					       HPTE_V_BOLTED, psize, psize,
 					       ssize);
-
+		if (ret == -1) {
+			/* Try to remove a non bolted entry */
+			ret = mmu_hash_ops.hpte_remove(hpteg);
+			if (ret != -1)
+				ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
+							       HPTE_V_BOLTED, psize, psize,
+							       ssize);
+		}
 		if (ret < 0)
 			break;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/79] powerpc/tools: Don't quote $objdump in scripts

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit e44ff9ea8f4c8a90c82f7b85bd4f5e497c841960 ]

Some of our scripts are passed $objdump and then call it as
"$objdump". This doesn't work if it contains spaces because we're
using ccache, for example you get errors such as:

  ./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory
  ./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory

Fix it by not quoting the string when we expand it, allowing the shell
to do the right thing for us.

Fixes: a71aa05e1416 ("powerpc: Convert relocs_check to a shell script using grep")
Fixes: 4ea80652dc75 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024004730.32135-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/tools/relocs_check.sh       | 2 +-
 arch/powerpc/tools/unrel_branch_check.sh | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
index ec2d5c835170a..d6c16e7faa387 100755
--- a/arch/powerpc/tools/relocs_check.sh
+++ b/arch/powerpc/tools/relocs_check.sh
@@ -23,7 +23,7 @@ objdump="$1"
 vmlinux="$2"
 
 bad_relocs=$(
-"$objdump" -R "$vmlinux" |
+$objdump -R "$vmlinux" |
 	# Only look at relocation lines.
 	grep -E '\<R_' |
 	# These relocations are okay
diff --git a/arch/powerpc/tools/unrel_branch_check.sh b/arch/powerpc/tools/unrel_branch_check.sh
index 1e972df3107ee..77114755dc6f2 100755
--- a/arch/powerpc/tools/unrel_branch_check.sh
+++ b/arch/powerpc/tools/unrel_branch_check.sh
@@ -18,14 +18,14 @@ vmlinux="$2"
 #__end_interrupts should be located within the first 64K
 
 end_intr=0x$(
-"$objdump" -R "$vmlinux" -d --start-address=0xc000000000000000		\
+$objdump -R "$vmlinux" -d --start-address=0xc000000000000000           \
 		 --stop-address=0xc000000000010000 |
 grep '\<__end_interrupts>:' |
 awk '{print $1}'
 )
 
 BRANCHES=$(
-"$objdump" -R "$vmlinux" -D --start-address=0xc000000000000000		\
+$objdump -R "$vmlinux" -D --start-address=0xc000000000000000           \
 		--stop-address=${end_intr} |
 grep -e "^c[0-9a-f]*:[[:space:]]*\([0-9a-f][0-9a-f][[:space:]]\)\{4\}[[:space:]]*b" |
 grep -v '\<__start_initialization_multiplatform>' |
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/79] powerpc/security/book3s64: Report L1TF status in sysfs

[Sasha Levin]

From: Anthony Steinhauser <asteinhauser@google.com>

[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]

Some PowerPC CPUs are vulnerable to L1TF to the same extent as to
Meltdown. It is also mitigated by flushing the L1D on privilege
transition.

Currently the sysfs gives a false negative on L1TF on CPUs that I
verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV
T2P9D01.

Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]
Link: https://lore.kernel.org/r/20191029190759.84821-1-asteinhauser@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/security.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index a5c5940d970ab..a4354c4f6bc50 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -160,6 +160,11 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	return sprintf(buf, "Vulnerable\n");
 }
+
+ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_meltdown(dev, attr, buf);
+}
 #endif
 
 ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/79] powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning

[Sasha Levin]

From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>

[ Upstream commit 16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]

With large memory (8TB and more) hotplug, we can get soft lockup
warnings as below. These were caused by a long loop without any
explicit cond_resched which is a problem for !PREEMPT kernels.

Avoid this using cond_resched() while inserting hash page table
entries. We already do similar cond_resched() in __add_pages(), see
commit f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to
__add_pages").

  rcu:     3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
   (t=24003 jiffies g=4285 q=2002)
  NMI backtrace for cpu 3
  CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
  Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    nmi_cpu_backtrace+0x124/0x130
    nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
    arch_trigger_cpumask_backtrace+0x28/0x3c
    rcu_dump_cpu_stacks+0xf8/0x154
    rcu_sched_clock_irq+0x878/0xb40
    update_process_times+0x48/0x90
    tick_sched_handle.isra.16+0x4c/0x80
    tick_sched_timer+0x68/0xe0
    __hrtimer_run_queues+0x180/0x430
    hrtimer_interrupt+0x110/0x300
    timer_interrupt+0x108/0x2f0
    decrementer_common+0x114/0x120
  --- interrupt: 901 at arch_add_memory+0xc0/0x130
      LR = arch_add_memory+0x74/0x130
    memremap_pages+0x494/0x650
    devm_memremap_pages+0x3c/0xa0
    pmem_attach_disk+0x188/0x750
    nvdimm_bus_probe+0xac/0x2c0
    really_probe+0x148/0x570
    driver_probe_device+0x19c/0x1d0
    device_driver_attach+0xcc/0x100
    bind_store+0x134/0x1c0
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1a0/0x270
    __vfs_write+0x3c/0x70
    vfs_write+0xd0/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x68

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001084656.31277-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/hash_utils_64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 11b41383e1672..8894c8f300eac 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -307,6 +307,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		if (ret < 0)
 			break;
 
+		cond_resched();
 #ifdef CONFIG_DEBUG_PAGEALLOC
 		if (debug_pagealloc_enabled() &&
 			(paddr >> PAGE_SHIFT) < linear_map_hash_count)
-- 
2.20.1

[PATCH AUTOSEL 4.19 39/79] powerpc/pseries/cmm: Implement release() function for sysfs device

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]

When unloading the module, one gets
  ------------[ cut here ]------------
  Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
  WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
  ...

We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/cmm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 25427a48feae3..502ebcc6c3cbe 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -425,6 +425,10 @@ static struct bus_type cmm_subsys = {
 	.dev_name = "cmm",
 };
 
+static void cmm_release_device(struct device *dev)
+{
+}
+
 /**
  * cmm_sysfs_register - Register with sysfs
  *
@@ -440,6 +444,7 @@ static int cmm_sysfs_register(struct device *dev)
 
 	dev->id = 0;
 	dev->bus = &cmm_subsys;
+	dev->release = cmm_release_device;
 
 	if ((rc = device_register(dev)))
 		goto subsys_unregister;
-- 
2.20.1

[PATCH AUTOSEL 4.19 43/79] powerpc/security: Fix wrong message when RFI Flush is disable

[Sasha Levin]

From: "Gustavo L. F. Walbon" <gwalbon@linux.ibm.com>

[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]

The issue was showing "Mitigation" message via sysfs whatever the
state of "RFI Flush", but it should show "Vulnerable" when it is
disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are
vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the
"L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows:

  CPU | L1D private | RFI Flush |                sysfs
  ----|-------------|-----------|-------------------------------------
   P9 |    False    |   False   | Vulnerable
   P9 |    False    |   True    | Mitigation: RFI Flush
   P9 |    True     |   False   | Vulnerable: L1D private per thread
   P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per thread
   P8 |    False    |   False   | Vulnerable
   P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: L1D private per thread

Output after fix:
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Vulnerable: L1D private per thread

Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/security.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c
index a4354c4f6bc50..6a3dde9587ccb 100644
--- a/arch/powerpc/kernel/security.c
+++ b/arch/powerpc/kernel/security.c
@@ -134,26 +134,22 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
 
-	if (rfi_flush || thread_priv) {
+	if (rfi_flush) {
 		struct seq_buf s;
 		seq_buf_init(&s, buf, PAGE_SIZE - 1);
 
-		seq_buf_printf(&s, "Mitigation: ");
-
-		if (rfi_flush)
-			seq_buf_printf(&s, "RFI Flush");
-
-		if (rfi_flush && thread_priv)
-			seq_buf_printf(&s, ", ");
-
+		seq_buf_printf(&s, "Mitigation: RFI Flush");
 		if (thread_priv)
-			seq_buf_printf(&s, "L1D private per thread");
+			seq_buf_printf(&s, ", L1D private per thread");
 
 		seq_buf_printf(&s, "\n");
 
 		return s.len;
 	}
 
+	if (thread_priv)
+		return sprintf(buf, "Vulnerable: L1D private per thread\n");
+
 	if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 	    !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 		return sprintf(buf, "Not affected\n");
-- 
2.20.1

[PATCH AUTOSEL 4.19 66/79] powerpc: Don't add -mabi= flags when building with Clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 465bfd9c44dea6b55962b5788a23ac87a467c923 ]

When building pseries_defconfig, building vdso32 errors out:

  error: unknown target ABI 'elfv1'

This happens because -m32 in clang changes the target to 32-bit,
which does not allow the ABI to be changed.

Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a
powerpc64le toolchain") added these flags to fix building big endian
kernels with a little endian GCC.

Clang doesn't need -mabi because the target triple controls the
default value. -mlittle-endian and -mbig-endian manipulate the triple
into either powerpc64-* or powerpc64le-*, which properly sets the
default ABI.

Adding a debug print out in the PPC64TargetInfo constructor after line
383 above shows this:

  $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null -
  Default ABI: elfv1

  $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null -
  Default ABI: elfv2

  $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null -
  Default ABI: elfv1

  $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null -
  Default ABI: elfv2

Don't specify -mabi when building with clang to avoid the build error
with -m32 and not change any code generation.

-mcall-aixdesc is not an implemented flag in clang so it can be safely
excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc
specific options on clang").

pseries_defconfig successfully builds after this patch and
powernv_defconfig and ppc44x_defconfig don't regress.

Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[mpe: Trim clang links in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index dfcb698ec8f3b..e43321f46a3be 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -90,11 +90,13 @@ MULTIPLEWORD	:= -mmultiple
 endif
 
 ifdef CONFIG_PPC64
+ifndef CONFIG_CC_IS_CLANG
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mabi=elfv1)
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mcall-aixdesc)
 aflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mabi=elfv1)
 aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mabi=elfv2
 endif
+endif
 
 ifneq ($(cc-name),clang)
   cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mno-strict-align
@@ -134,6 +136,7 @@ endif
 endif
 
 CFLAGS-$(CONFIG_PPC64)	:= $(call cc-option,-mtraceback=no)
+ifndef CONFIG_CC_IS_CLANG
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc))
 AFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2)
@@ -142,6 +145,7 @@ CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv1)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcall-aixdesc)
 AFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv1)
 endif
+endif
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc))
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 74/79] libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]

The DTC v1.5.1 added references to (U)INT32_MAX.

This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.

For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.

In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.

Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.

Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/compressed/libfdt_env.h | 4 +++-
 arch/powerpc/boot/libfdt_env.h        | 2 ++
 include/linux/libfdt_env.h            | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index b36c0289a308e..6a0f1f524466e 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -2,11 +2,13 @@
 #ifndef _ARM_LIBFDT_ENV_H
 #define _ARM_LIBFDT_ENV_H
 
+#include <linux/limits.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
-#define INT_MAX			((int)(~0U>>1))
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
 
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 2abc8e83b95e9..9757d4f6331e7 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -6,6 +6,8 @@
 #include <string.h>
 
 #define INT_MAX			((int)(~0U>>1))
+#define UINT32_MAX		((u32)~0U)
+#define INT32_MAX		((s32)(UINT32_MAX >> 1))
 
 #include "of.h"
 
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index edb0f0c309044..1adf54aad2df1 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -7,6 +7,9 @@
 
 #include <asm/byteorder.h>
 
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;
-- 
2.20.1