From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
alsa-devel@alsa-project.org,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Mark Brown <broonie@kernel.org>,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH AUTOSEL 5.4 072/205] ASoC: fsl_esai: Add spin lock to protect reset, stop and start
Date: Thu, 16 Jan 2020 11:40:47 -0500 [thread overview]
Message-ID: <20200116164300.6705-72-sashal@kernel.org> (raw)
In-Reply-To: <20200116164300.6705-1-sashal@kernel.org>
From: Shengjiu Wang <shengjiu.wang@nxp.com>
[ Upstream commit 35dac627471938eda89fa39ee4ead1f7667e0f57 ]
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
This issue may also happen with trigger->fsl_esai_trigger_start.
So Add spin lock to lock those functions.
Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl_esai.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index a78e4ab478df..c7a49d03463a 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -33,6 +33,7 @@
* @fsysclk: system clock source to derive HCK, SCK and FS
* @spbaclk: SPBA clock (optional, depending on SoC design)
* @task: tasklet to handle the reset operation
+ * @lock: spin lock between hw_reset() and trigger()
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
* @slots: number of slots
@@ -56,6 +57,7 @@ struct fsl_esai {
struct clk *fsysclk;
struct clk *spbaclk;
struct tasklet_struct task;
+ spinlock_t lock; /* Protect hw_reset and trigger */
u32 fifo_depth;
u32 slot_width;
u32 slots;
@@ -676,8 +678,10 @@ static void fsl_esai_hw_reset(unsigned long arg)
{
struct fsl_esai *esai_priv = (struct fsl_esai *)arg;
bool tx = true, rx = false, enabled[2];
+ unsigned long lock_flags;
u32 tfcr, rfcr;
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
/* Save the registers */
regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
@@ -715,6 +719,8 @@ static void fsl_esai_hw_reset(unsigned long arg)
fsl_esai_trigger_start(esai_priv, tx);
if (enabled[rx])
fsl_esai_trigger_start(esai_priv, rx);
+
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
}
static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -722,6 +728,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+ unsigned long lock_flags;
esai_priv->channels[tx] = substream->runtime->channels;
@@ -729,12 +736,16 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
fsl_esai_trigger_start(esai_priv, tx);
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock_irqsave(&esai_priv->lock, lock_flags);
fsl_esai_trigger_stop(esai_priv, tx);
+ spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
break;
default:
return -EINVAL;
@@ -1002,6 +1013,7 @@ static int fsl_esai_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, esai_priv);
+ spin_lock_init(&esai_priv->lock);
ret = fsl_esai_hw_init(esai_priv);
if (ret)
return ret;
--
2.20.1
next parent reply other threads:[~2020-01-16 16:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200116164300.6705-1-sashal@kernel.org>
2020-01-16 16:40 ` Sasha Levin [this message]
2020-01-16 16:41 ` [PATCH AUTOSEL 5.4 099/205] powerpc/security: Fix debugfs data leak on 32-bit Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 162/205] powerpc/powernv: Disable native PCIe port management Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 189/205] powerpc/kasan: Fix boot failure with RELOCATABLE && FSL_BOOKE Sasha Levin
2020-01-16 16:42 ` [PATCH AUTOSEL 5.4 190/205] powerpc/archrandom: fix arch_get_random_seed_int() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116164300.6705-72-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=shengjiu.wang@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).