From: Jordan Niethe <jniethe5@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: alistair@popple.id.au, mpe@ellerman.id.a,
Jordan Niethe <jniethe5@gmail.com>,
dja@axtens.net, bala24@linux.ibm.com
Subject: [PATCH v2 02/13] powerpc: Define new SRR1 bits for a future ISA version
Date: Tue, 11 Feb 2020 16:33:44 +1100 [thread overview]
Message-ID: <20200211053355.21574-3-jniethe5@gmail.com> (raw)
In-Reply-To: <20200211053355.21574-1-jniethe5@gmail.com>
Add the BOUNDARY SRR1 bit definition for when the cause of an alignment
exception is a prefixed instruction that crosses a 64-byte boundary.
Add the PREFIXED SRR1 bit definition for exceptions caused by prefixed
instructions.
Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it being
used to indicate that an ISI was due to the access being no-exec or
guarded. A future ISA version adds another purpose. It is also set if
there is an access in a cache-inhibited location for prefixed
instruction. Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
---
v2: Combined all the commits concerning SRR1 bits.
---
arch/powerpc/include/asm/reg.h | 4 +++-
arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
arch/powerpc/kvm/book3s_hv_rm_mmu.c | 2 +-
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index c7758c2ccc5f..173f33df4fab 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -762,7 +762,7 @@
#endif
#define SRR1_ISI_NOPT 0x40000000 /* ISI: Not found in hash */
-#define SRR1_ISI_N_OR_G 0x10000000 /* ISI: Access is no-exec or G */
+#define SRR1_ISI_N_G_OR_CIP 0x10000000 /* ISI: Access is no-exec or G or CI for a prefixed instruction */
#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 and 9 */
@@ -789,6 +789,8 @@
#define SRR1_PROGADDR 0x00010000 /* SRR0 contains subsequent addr */
#define SRR1_MCE_MCP 0x00080000 /* Machine check signal caused interrupt */
+#define SRR1_BOUNDARY 0x10000000 /* Prefixed instruction crosses 64-byte boundary */
+#define SRR1_PREFIXED 0x20000000 /* Exception caused by prefixed instruction */
#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */
#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index dc97e5be76f6..6ab685227574 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -1169,7 +1169,7 @@ static int kvmhv_translate_addr_nested(struct kvm_vcpu *vcpu,
} else if (vcpu->arch.trap == BOOK3S_INTERRUPT_H_INST_STORAGE) {
/* Can we execute? */
if (!gpte_p->may_execute) {
- flags |= SRR1_ISI_N_OR_G;
+ flags |= SRR1_ISI_N_G_OR_CIP;
goto forward_to_l1;
}
} else {
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 220305454c23..b53a9f1c1a46 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -1260,7 +1260,7 @@ long kvmppc_hpte_hv_fault(struct kvm_vcpu *vcpu, unsigned long addr,
status &= ~DSISR_NOHPTE; /* DSISR_NOHPTE == SRR1_ISI_NOPT */
if (!data) {
if (gr & (HPTE_R_N | HPTE_R_G))
- return status | SRR1_ISI_N_OR_G;
+ return status | SRR1_ISI_N_G_OR_CIP;
if (!hpte_read_permission(pp, slb_v & key))
return status | SRR1_ISI_PROT;
} else if (status & DSISR_ISSTORE) {
--
2.17.1
next prev parent reply other threads:[~2020-02-11 5:41 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-11 5:33 [PATCH v2 00/13] Initial Prefixed Instruction support Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 01/13] powerpc: Enable Prefixed Instructions Jordan Niethe
2020-02-11 5:33 ` Jordan Niethe [this message]
2020-02-11 5:33 ` [PATCH v2 03/13] powerpc sstep: Prepare to support prefixed instructions Jordan Niethe
2020-02-11 5:57 ` Christophe Leroy
2020-02-11 23:31 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 04/13] powerpc sstep: Add support for prefixed load/stores Jordan Niethe
2020-02-11 6:05 ` Christophe Leroy
2020-02-12 2:59 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 05/13] powerpc sstep: Add support for prefixed fixed-point arithmetic Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 06/13] powerpc: Support prefixed instructions in alignment handler Jordan Niethe
2020-02-11 6:14 ` Christophe Leroy
2020-02-12 2:55 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 07/13] powerpc/traps: Check for prefixed instructions in facility_unavailable_exception() Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 08/13] powerpc/xmon: Add initial support for prefixed instructions Jordan Niethe
2020-02-11 6:32 ` Christophe Leroy
2020-02-12 0:28 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 09/13] powerpc/xmon: Dump " Jordan Niethe
2020-02-11 6:39 ` Christophe Leroy
2020-02-12 0:31 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 10/13] powerpc/kprobes: Support kprobes on " Jordan Niethe
2020-02-11 6:46 ` Christophe Leroy
2020-02-12 0:32 ` Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 11/13] powerpc/uprobes: Add support for " Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 12/13] powerpc/hw_breakpoints: Initial " Jordan Niethe
2020-02-11 5:33 ` [PATCH v2 13/13] powerpc: Add prefix support to mce_find_instr_ea_and_pfn() Jordan Niethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200211053355.21574-3-jniethe5@gmail.com \
--to=jniethe5@gmail.com \
--cc=alistair@popple.id.au \
--cc=bala24@linux.ibm.com \
--cc=dja@axtens.net \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.a \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).