From: Jordan Niethe <jniethe5@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: alistair@popple.id.au, bala24@linux.ibm.com,
Jordan Niethe <jniethe5@gmail.com>,
dja@axtens.net
Subject: [PATCH v3 06/14] powerpc: Support prefixed instructions in alignment handler
Date: Wed, 26 Feb 2020 15:07:08 +1100 [thread overview]
Message-ID: <20200226040716.32395-7-jniethe5@gmail.com> (raw)
In-Reply-To: <20200226040716.32395-1-jniethe5@gmail.com>
Alignment interrupts can be caused by prefixed instructions accessing
memory. In the alignment handler the instruction that caused the
exception is loaded and attempted emulate. If the instruction is a
prefixed instruction load the prefix and suffix to emulate. After
emulating increment the NIP by 8.
Prefixed instructions are not permitted to cross 64-byte boundaries. If
they do the alignment interrupt is invoked with SRR1 BOUNDARY bit set.
If this occurs send a SIGBUS to the offending process if in user mode.
If in kernel mode call bad_page_fault().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
---
v2: - Move __get_user_instr() and __get_user_instr_inatomic() to this
commit (previously in "powerpc sstep: Prepare to support prefixed
instructions").
- Rename sufx to suffix
- Use a macro for calculating instruction length
v3: Move __get_user_{instr(), instr_inatomic()} up with the other
get_user definitions and remove nested if.
---
arch/powerpc/include/asm/uaccess.h | 25 +++++++++++++++++++++++++
arch/powerpc/kernel/align.c | 8 +++++---
arch/powerpc/kernel/traps.c | 21 ++++++++++++++++++++-
3 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 2f500debae21..8903a96cbb4b 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -105,6 +105,31 @@ static inline int __access_ok(unsigned long addr, unsigned long size,
#define __put_user_inatomic(x, ptr) \
__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+/*
+ * When reading an instruction iff it is a prefix, the suffix needs to be also
+ * loaded.
+ */
+#define __get_user_instr(x, y, ptr) \
+({ \
+ long __gui_ret = 0; \
+ y = 0; \
+ __gui_ret = __get_user(x, ptr); \
+ if (!__gui_ret && IS_PREFIX(x)) \
+ __gui_ret = __get_user(y, ptr + 1); \
+ __gui_ret; \
+})
+
+#define __get_user_instr_inatomic(x, y, ptr) \
+({ \
+ long __gui_ret = 0; \
+ y = 0; \
+ __gui_ret = __get_user_inatomic(x, ptr); \
+ if (!__gui_ret && IS_PREFIX(x)) \
+ __gui_ret = __get_user_inatomic(y, ptr + 1); \
+ __gui_ret; \
+})
+
+
extern long __put_user_bad(void);
/*
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index ba3bf5c3ab62..4984cf681215 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -293,7 +293,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
int fix_alignment(struct pt_regs *regs)
{
- unsigned int instr;
+ unsigned int instr, suffix;
struct instruction_op op;
int r, type;
@@ -303,13 +303,15 @@ int fix_alignment(struct pt_regs *regs)
*/
CHECK_FULL_REGS(regs);
- if (unlikely(__get_user(instr, (unsigned int __user *)regs->nip)))
+ if (unlikely(__get_user_instr(instr, suffix,
+ (unsigned int __user *)regs->nip)))
return -EFAULT;
if ((regs->msr & MSR_LE) != (MSR_KERNEL & MSR_LE)) {
/* We don't handle PPC little-endian any more... */
if (cpu_has_feature(CPU_FTR_PPC_LE))
return -EIO;
instr = swab32(instr);
+ suffix = swab32(suffix);
}
#ifdef CONFIG_SPE
@@ -334,7 +336,7 @@ int fix_alignment(struct pt_regs *regs)
if ((instr & 0xfc0006fe) == (PPC_INST_COPY & 0xfc0006fe))
return -EIO;
- r = analyse_instr(&op, regs, instr, PPC_NO_SUFFIX);
+ r = analyse_instr(&op, regs, instr, suffix);
if (r < 0)
return -EINVAL;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 82a3438300fd..d80b82fc1ae3 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -583,6 +583,10 @@ static inline int check_io_access(struct pt_regs *regs)
#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
#define REASON_PRIVILEGED ESR_PPR
#define REASON_TRAP ESR_PTR
+#define REASON_PREFIXED 0
+#define REASON_BOUNDARY 0
+
+#define inst_length(reason) 4
/* single-step stuff */
#define single_stepping(regs) (current->thread.debug.dbcr0 & DBCR0_IC)
@@ -597,6 +601,10 @@ static inline int check_io_access(struct pt_regs *regs)
#define REASON_ILLEGAL SRR1_PROGILL
#define REASON_PRIVILEGED SRR1_PROGPRIV
#define REASON_TRAP SRR1_PROGTRAP
+#define REASON_PREFIXED SRR1_PREFIXED
+#define REASON_BOUNDARY SRR1_BOUNDARY
+
+#define inst_length(reason) (((reason) & REASON_PREFIXED) ? 8 : 4)
#define single_stepping(regs) ((regs)->msr & MSR_SE)
#define clear_single_step(regs) ((regs)->msr &= ~MSR_SE)
@@ -1593,11 +1601,20 @@ void alignment_exception(struct pt_regs *regs)
{
enum ctx_state prev_state = exception_enter();
int sig, code, fixed = 0;
+ unsigned long reason;
/* We restore the interrupt state now */
if (!arch_irq_disabled_regs(regs))
local_irq_enable();
+ reason = get_reason(regs);
+
+ if (reason & REASON_BOUNDARY) {
+ sig = SIGBUS;
+ code = BUS_ADRALN;
+ goto bad;
+ }
+
if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT))
goto bail;
@@ -1606,7 +1623,8 @@ void alignment_exception(struct pt_regs *regs)
fixed = fix_alignment(regs);
if (fixed == 1) {
- regs->nip += 4; /* skip over emulated instruction */
+ /* skip over emulated instruction */
+ regs->nip += inst_length(reason);
emulate_single_step(regs);
goto bail;
}
@@ -1619,6 +1637,7 @@ void alignment_exception(struct pt_regs *regs)
sig = SIGBUS;
code = BUS_ADRALN;
}
+bad:
if (user_mode(regs))
_exception(sig, regs, code, regs->dar);
else
--
2.17.1
next prev parent reply other threads:[~2020-02-26 4:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 4:07 [PATCH v3 00/14] Initial Prefixed Instruction support Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 01/14] powerpc: Enable Prefixed Instructions Jordan Niethe
2020-02-26 6:46 ` Nicholas Piggin
2020-02-28 2:52 ` Jordan Niethe
2020-02-28 4:48 ` Nicholas Piggin
2020-03-03 23:20 ` Alistair Popple
2020-02-26 4:07 ` [PATCH v3 02/14] powerpc: Define new SRR1 bits for a future ISA version Jordan Niethe
2020-03-03 23:31 ` Alistair Popple
2020-02-26 4:07 ` [PATCH v3 03/14] powerpc sstep: Prepare to support prefixed instructions Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 04/14] powerpc sstep: Add support for prefixed load/stores Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 05/14] powerpc sstep: Add support for prefixed fixed-point arithmetic Jordan Niethe
2020-02-26 4:07 ` Jordan Niethe [this message]
2020-02-26 4:07 ` [PATCH v3 07/14] powerpc/traps: Check for prefixed instructions in facility_unavailable_exception() Jordan Niethe
2020-02-26 6:49 ` Nicholas Piggin
2020-02-26 23:52 ` Jordan Niethe
2020-02-28 1:57 ` Nicholas Piggin
2020-02-26 4:07 ` [PATCH v3 08/14] powerpc/xmon: Remove store_inst() for patch_instruction() Jordan Niethe
2020-02-26 7:00 ` Nicholas Piggin
2020-02-26 23:54 ` Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 09/14] powerpc/xmon: Add initial support for prefixed instructions Jordan Niethe
2020-02-26 7:06 ` Nicholas Piggin
2020-02-27 0:11 ` Jordan Niethe
2020-02-27 7:14 ` Christophe Leroy
2020-02-28 0:37 ` Jordan Niethe
2020-02-28 1:23 ` Nicholas Piggin
2020-02-26 4:07 ` [PATCH v3 10/14] powerpc/xmon: Dump " Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 11/14] powerpc/kprobes: Support kprobes on " Jordan Niethe
2020-02-26 7:14 ` Nicholas Piggin
2020-02-27 0:58 ` Jordan Niethe
2020-02-28 1:47 ` Nicholas Piggin
2020-02-28 1:56 ` Nicholas Piggin
2020-02-28 3:23 ` Jordan Niethe
2020-02-28 4:53 ` Nicholas Piggin
2020-02-26 4:07 ` [PATCH v3 12/14] powerpc/uprobes: Add support for " Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 13/14] powerpc/hw_breakpoints: Initial " Jordan Niethe
2020-02-26 4:07 ` [PATCH v3 14/14] powerpc: Add prefix support to mce_find_instr_ea_and_pfn() Jordan Niethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200226040716.32395-7-jniethe5@gmail.com \
--to=jniethe5@gmail.com \
--cc=alistair@popple.id.au \
--cc=bala24@linux.ibm.com \
--cc=dja@axtens.net \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).