From: "Cédric Le Goater" <clg@kaod.org>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: "David Gibson" <david@gibson.dropbear.id.au>,
linuxppc-dev@lists.ozlabs.org, "Greg Kurz" <groug@kaod.org>,
stable@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH 1/4] powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs
Date: Fri, 6 Mar 2020 16:01:40 +0100 [thread overview]
Message-ID: <20200306150143.5551-2-clg@kaod.org> (raw)
In-Reply-To: <20200306150143.5551-1-clg@kaod.org>
When a CPU is brought up, an IPI number is allocated and recorded
under the XIVE CPU structure. Invalid IPI numbers are tracked with
interrupt number 0x0.
On the PowerNV platform, the interrupt number space starts at 0x10 and
this works fine. However, on the sPAPR platform, it is possible to
allocate the interrupt number 0x0 and this raises an issue when CPU 0
is unplugged. The XIVE spapr driver tracks allocated interrupt numbers
in a bitmask and it is not correctly updated when interrupt number 0x0
is freed. It stays allocated and it is then impossible to reallocate.
Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/powerpc/sysdev/xive/xive-internal.h | 7 +++++++
arch/powerpc/sysdev/xive/common.c | 12 +++---------
arch/powerpc/sysdev/xive/native.c | 4 ++--
arch/powerpc/sysdev/xive/spapr.c | 4 ++--
4 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index 59cd366e7933..382980f4de2d 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -5,6 +5,13 @@
#ifndef __XIVE_INTERNAL_H
#define __XIVE_INTERNAL_H
+/*
+ * A "disabled" interrupt should never fire, to catch problems
+ * we set its logical number to this
+ */
+#define XIVE_BAD_IRQ 0x7fffffff
+#define XIVE_MAX_IRQ (XIVE_BAD_IRQ - 1)
+
/* Each CPU carry one of these with various per-CPU state */
struct xive_cpu {
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index fa49193206b6..550baba98ec9 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -68,13 +68,6 @@ static u32 xive_ipi_irq;
/* Xive state for each CPU */
static DEFINE_PER_CPU(struct xive_cpu *, xive_cpu);
-/*
- * A "disabled" interrupt should never fire, to catch problems
- * we set its logical number to this
- */
-#define XIVE_BAD_IRQ 0x7fffffff
-#define XIVE_MAX_IRQ (XIVE_BAD_IRQ - 1)
-
/* An invalid CPU target */
#define XIVE_INVALID_TARGET (-1)
@@ -1153,7 +1146,7 @@ static int xive_setup_cpu_ipi(unsigned int cpu)
xc = per_cpu(xive_cpu, cpu);
/* Check if we are already setup */
- if (xc->hw_ipi != 0)
+ if (xc->hw_ipi != XIVE_BAD_IRQ)
return 0;
/* Grab an IPI from the backend, this will populate xc->hw_ipi */
@@ -1190,7 +1183,7 @@ static void xive_cleanup_cpu_ipi(unsigned int cpu, struct xive_cpu *xc)
/* Disable the IPI and free the IRQ data */
/* Already cleaned up ? */
- if (xc->hw_ipi == 0)
+ if (xc->hw_ipi == XIVE_BAD_IRQ)
return;
/* Mask the IPI */
@@ -1346,6 +1339,7 @@ static int xive_prepare_cpu(unsigned int cpu)
if (np)
xc->chip_id = of_get_ibm_chip_id(np);
of_node_put(np);
+ xc->hw_ipi = XIVE_BAD_IRQ;
per_cpu(xive_cpu, cpu) = xc;
}
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 0ff6b739052c..50e1a8e02497 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -312,7 +312,7 @@ static void xive_native_put_ipi(unsigned int cpu, struct xive_cpu *xc)
s64 rc;
/* Free the IPI */
- if (!xc->hw_ipi)
+ if (xc->hw_ipi == XIVE_BAD_IRQ)
return;
for (;;) {
rc = opal_xive_free_irq(xc->hw_ipi);
@@ -320,7 +320,7 @@ static void xive_native_put_ipi(unsigned int cpu, struct xive_cpu *xc)
msleep(OPAL_BUSY_DELAY_MS);
continue;
}
- xc->hw_ipi = 0;
+ xc->hw_ipi = XIVE_BAD_IRQ;
break;
}
}
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 55dc61cb4867..3f15615712b5 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -560,11 +560,11 @@ static int xive_spapr_get_ipi(unsigned int cpu, struct xive_cpu *xc)
static void xive_spapr_put_ipi(unsigned int cpu, struct xive_cpu *xc)
{
- if (!xc->hw_ipi)
+ if (xc->hw_ipi == XIVE_BAD_IRQ)
return;
xive_irq_bitmap_free(xc->hw_ipi);
- xc->hw_ipi = 0;
+ xc->hw_ipi = XIVE_BAD_IRQ;
}
#endif /* CONFIG_SMP */
--
2.21.1
next prev parent reply other threads:[~2020-03-06 15:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 15:01 [PATCH 0/4] powerpc/xive: fixes and debug extensions Cédric Le Goater
2020-03-06 15:01 ` Cédric Le Goater [this message]
2020-03-10 5:17 ` [PATCH 1/4] powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs David Gibson
2020-03-10 15:09 ` Greg Kurz
2020-03-10 16:07 ` Cédric Le Goater
2020-04-01 12:53 ` Michael Ellerman
2020-03-06 15:01 ` [PATCH 2/4] powerpc/xive: Fix xmon support on the PowerNV platform Cédric Le Goater
2020-03-10 15:38 ` Greg Kurz
2020-03-06 15:01 ` [PATCH 3/4] powerpc/xmon: Add source flags to output of XIVE interrupts Cédric Le Goater
2020-03-10 15:43 ` Greg Kurz
2020-03-06 15:01 ` [PATCH 4/4] powerpc/xive: Add a debugfs file to dump internal XIVE state Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306150143.5551-2-clg@kaod.org \
--to=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=groug@kaod.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).