From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 3/4] powerpc/uaccess: evaluate macro arguments once, before user access is allowed
Date: Fri, 3 Apr 2020 19:35:28 +1000 [thread overview]
Message-ID: <20200403093529.43587-3-npiggin@gmail.com> (raw)
In-Reply-To: <20200403093529.43587-1-npiggin@gmail.com>
get/put_user can be called with nontrivial arguments. fs/proc/page.c
has a good example:
if (put_user(stable_page_flags(ppage), out)) {
stable_page_flags is quite a lot of code, including spin locks in the
page allocator.
Ensure these arguments are evaluated before user access is allowed.
This improves security by reducing code with access to userspace, but
it also fixes a PREEMPT bug with KUAP on powerpc/64s:
stable_page_flags is currently called with AMR set to allow writes,
it ends up calling spin_unlock(), which can call preempt_schedule. But
the task switch code can not be called with AMR set (it relies on
interrupts saving the register), so this blows up.
It's fine if the code inside allow_user_access is preemptible, because
a timer or IPI will save the AMR, but it's not okay to explicitly
cause a reschedule.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
v2:
- Reduce unnecessary lines changed (Christophe)
arch/powerpc/include/asm/uaccess.h | 49 +++++++++++++++++++++---------
1 file changed, 35 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 670910df3cc7..144d01645d68 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -166,13 +166,17 @@ do { \
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
if (!is_kernel_addr((unsigned long)__pu_addr)) \
might_fault(); \
- __chk_user_ptr(ptr); \
+ __chk_user_ptr(__pu_addr); \
if (do_allow) \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
else \
- __put_user_size_allowed((x), __pu_addr, (size), __pu_err); \
+ __put_user_size_allowed(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -180,9 +184,13 @@ do { \
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
might_fault(); \
- if (access_ok(__pu_addr, size)) \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ if (access_ok(__pu_addr, __pu_size)) \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -190,8 +198,12 @@ do { \
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __chk_user_ptr(ptr); \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
+ __chk_user_ptr(__pu_addr); \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -283,15 +295,18 @@ do { \
long __gu_err; \
__long_type(*(ptr)) __gu_val; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
+ __chk_user_ptr(__gu_addr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \
barrier_nospec(); \
if (do_allow) \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
else \
- __get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
@@ -300,12 +315,15 @@ do { \
long __gu_err = -EFAULT; \
__long_type(*(ptr)) __gu_val = 0; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
might_fault(); \
- if (access_ok(__gu_addr, (size))) { \
+ if (access_ok(__gu_addr, __gu_size)) { \
barrier_nospec(); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
} \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
@@ -314,10 +332,13 @@ do { \
long __gu_err; \
__long_type(*(ptr)) __gu_val; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
+ __chk_user_ptr(__gu_addr); \
barrier_nospec(); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
--
2.23.0
next prev parent reply other threads:[~2020-04-03 9:42 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-03 9:35 [PATCH v2 1/4] powerpc/64s: implement probe_kernel_read/write without touching AMR Nicholas Piggin
2020-04-03 9:35 ` [PATCH v2 2/4] powerpc/64s: use mmu_has_feature in set_kuap() and get_kuap() Nicholas Piggin
2020-04-03 9:35 ` Nicholas Piggin [this message]
2020-04-03 9:35 ` [PATCH v2 4/4] powerpc/uaccess: add more __builtin_expect annotations Nicholas Piggin
2020-04-03 10:35 ` Nicholas Piggin
2020-04-04 14:56 ` kbuild test robot
2020-04-03 10:31 ` [PATCH v2 1/4] powerpc/64s: implement probe_kernel_read/write without touching AMR Christophe Leroy
2020-04-03 11:05 ` Nicholas Piggin
2020-04-07 4:01 ` Nicholas Piggin
2020-04-07 9:09 ` Daniel Borkmann
2020-06-10 12:41 ` Christophe Leroy
2020-06-14 9:28 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200403093529.43587-3-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).