From: Oliver O'Halloran <oohall@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: aik@ozlabs.ru, Oliver O'Halloran <oohall@gmail.com>
Subject: [PATCH 1/7] powerpc/powernv/npu: Clean up compound table group initialisation
Date: Mon, 6 Apr 2020 13:07:39 +1000 [thread overview]
Message-ID: <20200406030745.24595-2-oohall@gmail.com> (raw)
In-Reply-To: <20200406030745.24595-1-oohall@gmail.com>
Re-work the control flow a bit so what's going on is a little clearer.
This also ensures the table_group is only initialised once in the P9
case. This shouldn't be a functional change since all the GPU PCI
devices should have the same table_group configuration, but it does
look strange.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
arch/powerpc/platforms/powernv/npu-dma.c | 46 +++++++++++-------------
1 file changed, 21 insertions(+), 25 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index b95b9e3c4c98..de617549c9a3 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -427,7 +427,7 @@ static void pnv_comp_attach_table_group(struct npu_comp *npucomp,
struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
{
- struct iommu_table_group *table_group;
+ struct iommu_table_group *compound_group;
struct npu_comp *npucomp;
struct pci_dev *gpdev = NULL;
struct pci_controller *hose;
@@ -446,36 +446,32 @@ struct iommu_table_group *pnv_try_setup_npu_table_group(struct pnv_ioda_pe *pe)
hose = pci_bus_to_host(npdev->bus);
if (hose->npu) {
- table_group = &hose->npu->npucomp.table_group;
-
- if (!table_group->group) {
- table_group->ops = &pnv_npu_peers_ops;
- iommu_register_group(table_group,
- hose->global_number,
- pe->pe_number);
- }
+ /* P9 case: compound group is per-NPU (all gpus, all links) */
+ npucomp = &hose->npu->npucomp;
} else {
- /* Create a group for 1 GPU and attached NPUs for POWER8 */
- pe->npucomp = kzalloc(sizeof(*pe->npucomp), GFP_KERNEL);
- table_group = &pe->npucomp->table_group;
- table_group->ops = &pnv_npu_peers_ops;
- iommu_register_group(table_group, hose->global_number,
- pe->pe_number);
+ /* P8 case: Compound group is per-GPU (1 gpu, 2 links) */
+ npucomp = pe->npucomp = kzalloc(sizeof(*npucomp), GFP_KERNEL);
}
- /* Steal capabilities from a GPU PE */
- table_group->max_dynamic_windows_supported =
- pe->table_group.max_dynamic_windows_supported;
- table_group->tce32_start = pe->table_group.tce32_start;
- table_group->tce32_size = pe->table_group.tce32_size;
- table_group->max_levels = pe->table_group.max_levels;
- if (!table_group->pgsizes)
- table_group->pgsizes = pe->table_group.pgsizes;
+ compound_group = &npucomp->table_group;
+ if (!compound_group->group) {
+ compound_group->ops = &pnv_npu_peers_ops;
+ iommu_register_group(compound_group, hose->global_number,
+ pe->pe_number);
+
+ /* Steal capabilities from a GPU PE */
+ compound_group->max_dynamic_windows_supported =
+ pe->table_group.max_dynamic_windows_supported;
+ compound_group->tce32_start = pe->table_group.tce32_start;
+ compound_group->tce32_size = pe->table_group.tce32_size;
+ compound_group->max_levels = pe->table_group.max_levels;
+ if (!compound_group->pgsizes)
+ compound_group->pgsizes = pe->table_group.pgsizes;
+ }
- npucomp = container_of(table_group, struct npu_comp, table_group);
pnv_comp_attach_table_group(npucomp, pe);
- return table_group;
+ return compound_group;
}
struct iommu_table_group *pnv_npu_compound_attach(struct pnv_ioda_pe *pe)
--
2.21.1
next prev parent reply other threads:[~2020-04-06 3:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-06 3:07 Make PowerNV IOMMU group setup saner (and fix it for hotpug) Oliver O'Halloran
2020-04-06 3:07 ` Oliver O'Halloran [this message]
2020-04-06 9:48 ` [PATCH 1/7] powerpc/powernv/npu: Clean up compound table group initialisation Alexey Kardashevskiy
2020-06-09 5:29 ` Michael Ellerman
2020-04-06 3:07 ` [PATCH 2/7] powerpc/powernv/iov: Don't add VFs to iommu group during PE config Oliver O'Halloran
2020-04-06 9:49 ` Alexey Kardashevskiy
2020-04-06 3:07 ` [PATCH 3/7] powerpc/powernv/pci: Register iommu group at PE DMA setup Oliver O'Halloran
2020-04-06 9:51 ` Alexey Kardashevskiy
2020-04-06 3:07 ` [PATCH 4/7] powerpc/powernv/pci: Add device to iommu group during dma_dev_setup() Oliver O'Halloran
2020-04-06 9:51 ` Alexey Kardashevskiy
2020-04-06 3:07 ` [PATCH 5/7] powerpc/powernv/pci: Delete old iommu recursive iommu setup Oliver O'Halloran
2020-04-06 9:53 ` Alexey Kardashevskiy
2020-04-06 3:07 ` [PATCH 6/7] powerpc/powernv/pci: Move tce size parsing to pci-ioda-tce.c Oliver O'Halloran
2020-04-06 9:53 ` Alexey Kardashevskiy
2020-04-06 3:07 ` [PATCH 7/7] powerpc/powernv/npu: Move IOMMU group setup into npu-dma.c Oliver O'Halloran
2020-04-06 9:54 ` Alexey Kardashevskiy
2020-04-06 9:56 ` Make PowerNV IOMMU group setup saner (and fix it for hotpug) Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200406030745.24595-2-oohall@gmail.com \
--to=oohall@gmail.com \
--cc=aik@ozlabs.ru \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).