[PATCH v2 0/8] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[PATCH v2 0/8] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[Ravi Bangoria]

Last series[1] was to add basic infrastructure support for more than
one watchpoint on Book3S powerpc. This series actually enables the 2nd 
DAWR for baremetal and powervm. Kvm guest is still not supported.

v1: https://lore.kernel.org/linuxppc-dev/20200602040106.127693-1-ravi.bangoria@linux.ibm.com

v1->v2:
  - Milton reported an issue with one patch in last series[1]. patch #1
    fixes that. So patch#1 is new.
  - Rebased to powerpc/next which now has "Base support for POWER10"[2]
    series included.

[1]: https://lore.kernel.org/linuxppc-dev/20200514111741.97993-1-ravi.bangoria@linux.ibm.com/
[2]: https://lore.kernel.org/linuxppc-dev/20200521014341.29095-1-alistair@popple.id.au

Ravi Bangoria (8):
  powerpc/watchpoint: Fix 512 byte boundary limit
  powerpc/watchpoint: Enable watchpoint functionality on power10 guest
  powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
  powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
  powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
  powerpc/watchpoint: Guest support for 2nd DAWR hcall
  powerpc/watchpoint: Return available watchpoints dynamically
  powerpc/watchpoint: Remove 512 byte boundary

 arch/powerpc/include/asm/cputable.h       | 13 +++++++++----
 arch/powerpc/include/asm/hvcall.h         |  3 ++-
 arch/powerpc/include/asm/hw_breakpoint.h  |  5 +++--
 arch/powerpc/include/asm/machdep.h        |  2 +-
 arch/powerpc/include/asm/plpar_wrappers.h |  7 ++++++-
 arch/powerpc/kernel/dawr.c                |  2 +-
 arch/powerpc/kernel/dt_cpu_ftrs.c         |  7 +++++++
 arch/powerpc/kernel/hw_breakpoint.c       |  5 +++--
 arch/powerpc/kernel/prom.c                |  2 ++
 arch/powerpc/kvm/book3s_hv.c              |  2 +-
 arch/powerpc/platforms/pseries/setup.c    |  7 +++++--
 11 files changed, 40 insertions(+), 15 deletions(-)

-- 
2.26.2

[PATCH v2 1/8] powerpc/watchpoint: Fix 512 byte boundary limit

[Ravi Bangoria]

Milton reported that we are aligning start and end address to wrong
size SZ_512M. It should be SZ_512. Fix that.

While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().

Fixes: e68ef121c1f4 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 0000daf0e1da..031e6defc08e 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -419,7 +419,7 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
 		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
+		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2

[PATCH v2 2/8] powerpc/watchpoint: Enable watchpoint functionality on power10 guest

[Ravi Bangoria]

CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index bac2252c839e..e506d429b1af 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -478,7 +478,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_ARCH_31)
+	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
 #define CPU_FTRS_CELL	(CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-- 
2.26.2

[PATCH v2 3/8] powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR

[Ravi Bangoria]

Add new device-tree feature for 2nd DAWR. If this feature is present,
2nd DAWR is supported, otherwise not.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h | 7 +++++--
 arch/powerpc/kernel/dt_cpu_ftrs.c   | 7 +++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e506d429b1af..3445c86e1f6f 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -214,6 +214,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_P9_RADIX_PREFETCH_BUG	LONG_ASM_CONST(0x0002000000000000)
 #define CPU_FTR_ARCH_31			LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_DAWR1			LONG_ASM_CONST(0x0008000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -497,14 +498,16 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \
 	     CPU_FTR_ALTIVEC_COMP | CPU_FTR_VSX_COMP | CPU_FTRS_POWER9 | \
-	     CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10)
+	     CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10 | \
+	     CPU_FTR_DAWR1)
 #else
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \
 	     CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \
 	     CPU_FTRS_POWER8 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
 	     CPU_FTR_VSX_COMP | CPU_FTR_ALTIVEC_COMP | CPU_FTRS_POWER9 | \
-	     CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10)
+	     CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10 | \
+	     CPU_FTR_DAWR1)
 #endif /* CONFIG_CPU_LITTLE_ENDIAN */
 #endif
 #else
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 3a409517c031..eafd713ca23d 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -574,6 +574,12 @@ static int __init feat_enable_mma(struct dt_cpu_feature *f)
 	return 1;
 }
 
+static int __init feat_enable_dawr1(struct dt_cpu_feature *f)
+{
+	cur_cpu_spec->cpu_features |= CPU_FTR_DAWR1;
+	return 1;
+}
+
 struct dt_cpu_feature_match {
 	const char *name;
 	int (*enable)(struct dt_cpu_feature *f);
@@ -649,6 +655,7 @@ static struct dt_cpu_feature_match __initdata
 	{"wait-v3", feat_enable, 0},
 	{"prefix-instructions", feat_enable, 0},
 	{"matrix-multiply-assist", feat_enable_mma, 0},
+	{"dawr1", feat_enable_dawr1, 0},
 };
 
 static bool __initdata using_dt_cpu_ftrs;
-- 
2.26.2

[PATCH v2 4/8] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit

[Ravi Bangoria]

As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/prom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 6a3bac357e24..34272cef8ae6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -175,6 +175,8 @@ static struct ibm_pa_feature {
 	 */
 	{ .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
 	  .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+	{ .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
-- 
2.26.2

[PATCH v2 5/8] powerpc/watchpoint: Rename current H_SET_MODE DAWR macro

[Ravi Bangoria]

Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/hvcall.h         | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 2 +-
 arch/powerpc/kvm/book3s_hv.c              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index e90c073e437e..a7f6f1aeda6b 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -354,7 +354,7 @@
 
 /* Values for 2nd argument to H_SET_MODE */
 #define H_SET_MODE_RESOURCE_SET_CIABR		1
-#define H_SET_MODE_RESOURCE_SET_DAWR		2
+#define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
 
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 4497c8afb573..93eb133d572c 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -312,7 +312,7 @@ static inline long plpar_set_ciabr(unsigned long ciabr)
 
 static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0)
 {
-	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
 static inline long plpar_signal_sys_reset(long cpu)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index a0cf17597838..26820b7bd75c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -766,7 +766,7 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
 			return H_P3;
 		vcpu->arch.ciabr  = value1;
 		return H_SUCCESS;
-	case H_SET_MODE_RESOURCE_SET_DAWR:
+	case H_SET_MODE_RESOURCE_SET_DAWR0:
 		if (!kvmppc_power8_compatible(vcpu))
 			return H_P2;
 		if (!ppc_breakpoint_available())
-- 
2.26.2

[PATCH v2 6/8] powerpc/watchpoint: Guest support for 2nd DAWR hcall

[Ravi Bangoria]

2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/hvcall.h         | 1 +
 arch/powerpc/include/asm/machdep.h        | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 5 +++++
 arch/powerpc/kernel/dawr.c                | 2 +-
 arch/powerpc/platforms/pseries/setup.c    | 7 +++++--
 5 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index a7f6f1aeda6b..3f170b9496a1 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -357,6 +357,7 @@
 #define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
+#define H_SET_MODE_RESOURCE_SET_DAWR1		5
 
 /* Values for argument to H_SIGNAL_SYS_RESET */
 #define H_SIGNAL_SYS_RESET_ALL			-1
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7bcb64444a39..a90b892f0bfe 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -131,7 +131,7 @@ struct machdep_calls {
 				    unsigned long dabrx);
 
 	/* Set DAWR for this platform, leave empty for default implementation */
-	int		(*set_dawr)(unsigned long dawr,
+	int		(*set_dawr)(int nr, unsigned long dawr,
 				    unsigned long dawrx);
 
 #ifdef CONFIG_PPC32	/* XXX for now */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 93eb133d572c..d7a1acc83593 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -315,6 +315,11 @@ static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
+static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1)
+{
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1);
+}
+
 static inline long plpar_signal_sys_reset(long cpu)
 {
 	return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 500f52fa4711..cdc2dccb987d 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -37,7 +37,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
 	dawrx |= (mrd & 0x3f) << (63 - 53);
 
 	if (ppc_md.set_dawr)
-		return ppc_md.set_dawr(dawr, dawrx);
+		return ppc_md.set_dawr(nr, dawr, dawrx);
 
 	if (nr == 0) {
 		mtspr(SPRN_DAWR0, dawr);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 64d18f4bf093..b001cde1a2d7 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -832,12 +832,15 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
 	return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
 }
 
-static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
+static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
 {
 	/* PAPR says we can't set HYP */
 	dawrx &= ~DAWRX_HYP;
 
-	return  plpar_set_watchpoint0(dawr, dawrx);
+	if (nr == 0)
+		return plpar_set_watchpoint0(dawr, dawrx);
+	else
+		return plpar_set_watchpoint1(dawr, dawrx);
 }
 
 #define CMO_CHARACTERISTICS_TOKEN 44
-- 
2.26.2

[PATCH v2 7/8] powerpc/watchpoint: Return available watchpoints dynamically

[Ravi Bangoria]

So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h      | 4 +++-
 arch/powerpc/include/asm/hw_breakpoint.h | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 3445c86e1f6f..36a0851a7a9b 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -633,7 +633,9 @@ enum {
  * Maximum number of hw breakpoint supported on powerpc. Number of
  * breakpoints supported by actual hw might be less than this.
  */
-#define HBP_NUM_MAX	1
+#define HBP_NUM_MAX	2
+#define HBP_NUM_ONE	1
+#define HBP_NUM_TWO	2
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index cb424799da0d..d4eab1694bcd 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -5,10 +5,11 @@
  * Copyright 2010, IBM Corporation.
  * Author: K.Prasad <prasad@linux.vnet.ibm.com>
  */
-
 #ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
 #define _PPC_BOOK3S_64_HW_BREAKPOINT_H
 
+#include <asm/cpu_has_feature.h>
+
 #ifdef	__KERNEL__
 struct arch_hw_breakpoint {
 	unsigned long	address;
@@ -46,7 +47,7 @@ struct arch_hw_breakpoint {
 
 static inline int nr_wp_slots(void)
 {
-	return HBP_NUM_MAX;
+	return cpu_has_feature(CPU_FTR_DAWR1) ? HBP_NUM_TWO : HBP_NUM_ONE;
 }
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-- 
2.26.2

[PATCH v2 8/8] powerpc/watchpoint: Remove 512 byte boundary

[Ravi Bangoria]

Power10 has removed 512 bytes boundary from match criteria. i.e. The watch
range can cross 512 bytes boundary.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 031e6defc08e..9a2899f25aae 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -418,8 +418,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
-		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
+		/* DAWR region can't cross 512 bytes boundary on p10 predecessors */
+		if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512)))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2