[PATCH AUTOSEL 5.4 010/266] ASoC: fsl_esai: Disable exception interrupt before scheduling tasklet

[PATCH AUTOSEL 5.4 010/266] ASoC: fsl_esai: Disable exception interrupt before scheduling tasklet

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 1fecbb71fe0e46b886f84e3b6decca6643c3af6d ]

Disable exception interrupt before scheduling tasklet, otherwise if
the tasklet isn't handled immediately, there will be endless xrun
interrupt.

Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/a8f2ad955aac9e52587beedc1133b3efbe746895.1587968824.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_esai.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index c7a49d03463a..84290be778f0 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -87,6 +87,10 @@ static irqreturn_t esai_isr(int irq, void *devid)
 	if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) &&
 	    esai_priv->reset_at_xrun) {
 		dev_dbg(&pdev->dev, "reset module for xrun\n");
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR,
+				   ESAI_xCR_xEIE_MASK, 0);
+		regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR,
+				   ESAI_xCR_xEIE_MASK, 0);
 		tasklet_schedule(&esai_priv->task);
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 024/266] powerpc/kasan: Fix stack overflow by increasing THREAD_SHIFT

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit edbadaf0671072298e506074128b64e003c5812c ]

When CONFIG_KASAN is selected, the stack usage is increased.

In the same way as x86 and arm64 architectures, increase
THREAD_SHIFT when CONFIG_KASAN is selected.

Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Reported-by: <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207129
Link: https://lore.kernel.org/r/2c50f3b1c9bbaa4217c9a98f3044bd2a36c46a4f.1586361277.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 3dc5aecdd853..135d770e8e57 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -747,6 +747,7 @@ config THREAD_SHIFT
 	range 13 15
 	default "15" if PPC_256K_PAGES
 	default "14" if PPC64
+	default "14" if KASAN
 	default "13"
 	help
 	  Used to define the stack size. The default is almost always what you
-- 
2.25.1

[PATCH AUTOSEL 5.4 044/266] ps3disk: use the default segment boundary

[Sasha Levin]

From: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>

[ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ]

Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute
multi-page bvec count"), the kernel will bug_on on the PS3 because
bio_split() is called with sectors == 0:

  kernel BUG at block/bio.c:1853!
  Oops: Exception in kernel mode, sig: 5 [#1]
  BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3
  Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \
  ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t
  CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1
  NIP:  c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000
  REGS: c00000000135ae90 TRAP: 0700   Not tainted  (5.3.0-rc4)
  MSR:  8000000000028032 <SF,EE,IR,DR,RI>  CR: 44008240  XER: 20000000
  IRQMASK: 0
  GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300
  GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff
  GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff
  GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001
  GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004
  GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080
  GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0
  GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000
  NIP [c00000000027d0d0] .bio_split+0x28/0xac
  LR [c00000000027d0b0] .bio_split+0x8/0xac
  Call Trace:
  [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable)
  [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c
  [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4
  [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294
  [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174
  [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c
  [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184
  [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38
  [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8
  [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184
  [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8
  [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830
  [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c
  [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0
  [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124
  [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8
  [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70
  Instruction dump:
  7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0
  7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62
  [ end trace 313fec760f30aa1f ]---

The problem originates from setting the segment boundary of the
request queue to -1UL. This makes get_max_segment_size() return zero
when offset is zero, whatever the max segment size. The test with
BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows
to zero in the return statement.

Not setting the segment boundary and using the default
value (BLK_SEG_BOUNDARY_MASK) fixes the problem.

Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/ps3disk.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index c5c6487a19d5..7b55811c2a81 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -454,7 +454,6 @@ static int ps3disk_probe(struct ps3_system_bus_device *_dev)
 	queue->queuedata = dev;
 
 	blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9);
-	blk_queue_segment_boundary(queue, -1UL);
 	blk_queue_dma_alignment(queue, dev->blk_size-1);
 	blk_queue_logical_block_size(queue, dev->blk_size);
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 054/266] powerpc/ptdump: Add _PAGE_COHERENT flag

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 3af4786eb429b2df76cbd7ce3bae21467ac3e4fb ]

For platforms using shared.c (4xx, Book3e, Book3s/32), also handle the
_PAGE_COHERENT flag which corresponds to the M bit of the WIMG flags.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Make it more verbose, use "coherent" rather than "m"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/324c3d860717e8e91fca3bb6c0f8b23e1644a404.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/ptdump/shared.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/mm/ptdump/shared.c b/arch/powerpc/mm/ptdump/shared.c
index f7ed2f187cb0..784f8df17f73 100644
--- a/arch/powerpc/mm/ptdump/shared.c
+++ b/arch/powerpc/mm/ptdump/shared.c
@@ -30,6 +30,11 @@ static const struct flag_info flag_array[] = {
 		.val	= _PAGE_PRESENT,
 		.set	= "present",
 		.clear	= "       ",
+	}, {
+		.mask	= _PAGE_COHERENT,
+		.val	= _PAGE_COHERENT,
+		.set	= "coherent",
+		.clear	= "        ",
 	}, {
 		.mask	= _PAGE_GUARDED,
 		.val	= _PAGE_GUARDED,
-- 
2.25.1

[PATCH AUTOSEL 5.4 062/266] powerpc/perf/hv-24x7: Fix inconsistent output values incase multiple hv-24x7 events run

[Sasha Levin]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit b4ac18eead28611ff470d0f47a35c4e0ac080d9c ]

Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.

For example:

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
			   hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
	  		   -C 0 -I 1000 sleep 100

     1.000121704                120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000121704                  5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000357733                  8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000357733                 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000641884                 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Getting these large values in case we do -I.

As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.

This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.

With this patch
In power9 platform

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
		           hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
			   -C 0 -I 1000 sleep 100

     1.000117685                 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000117685                  1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000349331                 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000349331                  2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495900                131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495900                  4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000645920                204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000645920                 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.284169997                 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/hv-24x7.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 573e0b309c0c..48e8f4b17b91 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -1400,16 +1400,6 @@ static void h_24x7_event_read(struct perf_event *event)
 			h24x7hw = &get_cpu_var(hv_24x7_hw);
 			h24x7hw->events[i] = event;
 			put_cpu_var(h24x7hw);
-			/*
-			 * Clear the event count so we can compute the _change_
-			 * in the 24x7 raw counter value at the end of the txn.
-			 *
-			 * Note that we could alternatively read the 24x7 value
-			 * now and save its value in event->hw.prev_count. But
-			 * that would require issuing a hcall, which would then
-			 * defeat the purpose of using the txn interface.
-			 */
-			local64_set(&event->count, 0);
 		}
 
 		put_cpu_var(hv_24x7_reqb);
-- 
2.25.1

[PATCH AUTOSEL 5.4 068/266] powerpc/crashkernel: Take "mem=" option into account

[Sasha Levin]

From: Pingfan Liu <kernelfans@gmail.com>

[ Upstream commit be5470e0c285a68dc3afdea965032f5ddc8269d7 ]

'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.

E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.

This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
    if (fadump_reserve_mem() == 0)
            reserve_crashkernel();
    ...
    /* Ensure that total memory size is page-aligned. */
    limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
    memblock_enforce_memory_limit(limit);

While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/machine_kexec.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c4ed328a7b96..7a1c11a7cba5 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -114,11 +114,12 @@ void machine_kexec(struct kimage *image)
 
 void __init reserve_crashkernel(void)
 {
-	unsigned long long crash_size, crash_base;
+	unsigned long long crash_size, crash_base, total_mem_sz;
 	int ret;
 
+	total_mem_sz = memory_limit ? memory_limit : memblock_phys_mem_size();
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, total_mem_sz,
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -177,6 +178,7 @@ void __init reserve_crashkernel(void)
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
+		total_mem_sz = memory_limit;
 		printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
 		       memory_limit);
 	}
@@ -185,7 +187,7 @@ void __init reserve_crashkernel(void)
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(memblock_phys_mem_size() >> 20));
+			(unsigned long)(total_mem_sz >> 20));
 
 	if (!memblock_is_region_memory(crashk_res.start, crash_size) ||
 	    memblock_reserve(crashk_res.start, crash_size)) {
-- 
2.25.1

[PATCH AUTOSEL 5.4 082/266] scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM

[Sasha Levin]

From: Tyrel Datwyler <tyreld@linux.ibm.com>

[ Upstream commit 4919b33b63c8b69d8dcf2b867431d0e3b6dc6d28 ]

The adapter info MAD is used to send the client info and receive the host
info as a response. A persistent buffer is used and as such the client info
is overwritten after the response. During the course of a normal adapter
reset the client info is refreshed in the buffer in preparation for sending
the adapter info MAD.

However, in the special case of LPM where we reenable the CRQ instead of a
full CRQ teardown and reset we fail to refresh the client info in the
adapter info buffer. As a result, after Live Partition Migration (LPM) we
erroneously report the host's info as our own.

[mkp: typos]

Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 59f0f1030c54..c5711c659b51 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -415,6 +415,8 @@ static int ibmvscsi_reenable_crq_queue(struct crq_queue *queue,
 	int rc = 0;
 	struct vio_dev *vdev = to_vio_dev(hostdata->dev);
 
+	set_adapter_info(hostdata);
+
 	/* Re-enable the CRQ */
 	do {
 		if (rc)
-- 
2.25.1

[PATCH AUTOSEL 5.4 105/266] tty: hvc: Fix data abort due to race in hvc_open

[Sasha Levin]

From: Raghavendra Rao Ananta <rananta@codeaurora.org>

[ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ]

Potentially, hvc_open() can be called in parallel when two tasks calls
open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add()
callback in the function fails, where it sets the tty->driver_data to
NULL, the parallel hvc_open() can see this NULL and cause a memory abort.
Hence, serialize hvc_open and check if tty->private_data is NULL before
proceeding ahead.

The issue can be easily reproduced by launching two tasks simultaneously
that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &

Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/hvc/hvc_console.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index cdcc64ea2554..f8e43a6faea9 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -75,6 +75,8 @@ static LIST_HEAD(hvc_structs);
  */
 static DEFINE_MUTEX(hvc_structs_mutex);
 
+/* Mutex to serialize hvc_open */
+static DEFINE_MUTEX(hvc_open_mutex);
 /*
  * This value is used to assign a tty->index value to a hvc_struct based
  * upon order of exposure via hvc_probe(), when we can not match it to
@@ -346,16 +348,24 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
  */
 static int hvc_open(struct tty_struct *tty, struct file * filp)
 {
-	struct hvc_struct *hp = tty->driver_data;
+	struct hvc_struct *hp;
 	unsigned long flags;
 	int rc = 0;
 
+	mutex_lock(&hvc_open_mutex);
+
+	hp = tty->driver_data;
+	if (!hp) {
+		rc = -EIO;
+		goto out;
+	}
+
 	spin_lock_irqsave(&hp->port.lock, flags);
 	/* Check and then increment for fast path open. */
 	if (hp->port.count++ > 0) {
 		spin_unlock_irqrestore(&hp->port.lock, flags);
 		hvc_kick();
-		return 0;
+		goto out;
 	} /* else count == 0 */
 	spin_unlock_irqrestore(&hp->port.lock, flags);
 
@@ -383,6 +393,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	/* Force wakeup of the polling thread */
 	hvc_kick();
 
+out:
+	mutex_unlock(&hvc_open_mutex);
 	return rc;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 142/266] powerpc/64: Don't initialise init_task->thread.regs

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 7ffa8b7dc11752827329e4e84a574ea6aaf24716 ]

Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:

  smp: Bringing up secondary CPUs ...
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
  NIP:  c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000
  REGS: c0000000026d3980 TRAP: 0700   Not tainted  (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
  MSR:  800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 48048224  XER: 00000000
  CFAR: c000000000019cc8 IRQMASK: 1
  GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
  GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164
  GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030
  GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
  GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
  GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
  GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
  GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
  NIP [c00000000001a2b4] giveup_all+0xb4/0x110
  LR [c00000000001a29c] giveup_all+0x9c/0x110
  Call Trace:
  [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable)
  [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480
  [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970
  [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70
  [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0
  [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40
  [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8
  [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0
  [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400

Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:

  usermsr = tsk->thread.regs->msr;
  ...
  WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));

ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.

Dumping tsk->thread.regs->msr we see that it's: 0x1db60000

Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.

We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.

Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:

  0000000000000000 c000000002780080    gpr[0]     gpr[1]
  0000000000000000 c000000002666008    gpr[2]     gpr[3]
  c0000000026d3ed0 0000000000000078    gpr[4]     gpr[5]
  c000000000011b68 c000000002780080    gpr[6]     gpr[7]
  0000000000000000 0000000000000000    gpr[8]     gpr[9]
  c0000000026d3f90 0000800000002200    gpr[10]    gpr[11]
  c000000002004820 c0000000026d7200    gpr[12]    gpr[13]
  000000001db60000 c0000000010aabe8    gpr[14]    gpr[15]
  c0000000010aabe8 c0000000010aabe8    gpr[16]    gpr[17]
  c00000000294d598 0000000000000000    gpr[18]    gpr[19]
  0000000000000000 0000000000001ff8    gpr[20]    gpr[21]
  0000000000000000 c00000000206d608    gpr[22]    gpr[23]
  c00000000278e0cc 0000000000000000    gpr[24]    gpr[25]
  000000002fff0000 c000000000000000    gpr[26]    gpr[27]
  0000000002000000 0000000000000028    gpr[28]    gpr[29]
  000000001db60000 0000000004750000    gpr[30]    gpr[31]
  0000000002000000 000000001db60000    nip        msr
  0000000000000000 0000000000000000    orig_r3    ctr
  c00000000000c49c 0000000000000000    link       xer
  0000000000000000 0000000000000000    ccr        softe
  0000000000000000 0000000000000000    trap       dar
  0000000000000000 0000000000000000    dsisr      result
  0000000000000000 0000000000000000    ppr        kuap
  0000000000000000 0000000000000000    pad[2]     pad[3]

This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).

init_task->thread.regs is setup at build time in processor.h:

  #define INIT_THREAD  { \
  	.ksp = INIT_SP, \
  	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \

The early boot code where we setup the initial stack is:

  LOAD_REG_ADDR(r3,init_thread_union)

  /* set up a stack pointer */
  LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
  add	r1,r3,r1
  li	r0,0
  stdu	r0,-STACK_FRAME_OVERHEAD(r1)

Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.

So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.

We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.

As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.

Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.

So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.

Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/processor.h | 1 -
 arch/powerpc/kernel/head_64.S        | 9 +--------
 2 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index a9993e7a443b..64b998db9d3e 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -291,7 +291,6 @@ struct thread_struct {
 #else
 #define INIT_THREAD  { \
 	.ksp = INIT_SP, \
-	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
 	.addr_limit = KERNEL_DS, \
 	.fpexc_mode = 0, \
 	.fscr = FSCR_TAR | FSCR_EBB \
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ad79fddb974d..780f527eabd2 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -945,15 +945,8 @@ start_here_multiplatform:
 	std	r0,0(r4)
 #endif
 
-	/* The following gets the stack set up with the regs */
-	/* pointing to the real addr of the kernel stack.  This is   */
-	/* all done to support the C function call below which sets  */
-	/* up the htab.  This is done because we have relocated the  */
-	/* kernel but are still running in real mode. */
-
-	LOAD_REG_ADDR(r3,init_thread_union)
-
 	/* set up a stack pointer */
+	LOAD_REG_ADDR(r3,init_thread_union)
 	LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
 	add	r1,r3,r1
 	li	r0,0
-- 
2.25.1

[PATCH AUTOSEL 5.4 150/266] powerpc/64s/exception: Fix machine check no-loss idle wakeup

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 8a5054d8cbbe03c68dcb0957c291c942132e4101 ]

The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.

The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.

Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.

This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).

Fixes: 10d91611f426d ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index d0018dd17e0a..70ac8a6ba0c1 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1090,17 +1090,19 @@ EXC_COMMON_BEGIN(machine_check_idle_common)
 	bl	machine_check_queue_event
 
 	/*
-	 * We have not used any non-volatile GPRs here, and as a rule
-	 * most exception code including machine check does not.
-	 * Therefore PACA_NAPSTATELOST does not need to be set. Idle
-	 * wakeup will restore volatile registers.
+	 * GPR-loss wakeups are relatively straightforward, because the
+	 * idle sleep code has saved all non-volatile registers on its
+	 * own stack, and r1 in PACAR1.
 	 *
-	 * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce.
+	 * For no-loss wakeups the r1 and lr registers used by the
+	 * early machine check handler have to be restored first. r2 is
+	 * the kernel TOC, so no need to restore it.
 	 *
 	 * Then decrement MCE nesting after finishing with the stack.
 	 */
 	ld	r3,_MSR(r1)
 	ld	r4,_LINK(r1)
+	ld	r1,GPR1(r1)
 
 	lhz	r11,PACA_IN_MCE(r13)
 	subi	r11,r11,1
@@ -1109,7 +1111,7 @@ EXC_COMMON_BEGIN(machine_check_idle_common)
 	mtlr	r4
 	rlwinm	r10,r3,47-31,30,31
 	cmpwi	cr1,r10,2
-	bltlr	cr1	/* no state loss, return to idle caller */
+	bltlr	cr1	/* no state loss, return to idle caller with r3=SRR1 */
 	b	idle_return_gpr_loss
 #endif
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 151/266] powerpc/pseries/ras: Fix FWNMI_VALID off by one

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]

This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.

It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/ras.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 753adeb624f2..13ef77fd648f 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -395,10 +395,11 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
 /*
  * Some versions of FWNMI place the buffer inside the 4kB page starting at
  * 0x7000. Other versions place it inside the rtas buffer. We check both.
+ * Minimum size of the buffer is 16 bytes.
  */
 #define VALID_FWNMI_BUFFER(A) \
-	((((A) >= 0x7000) && ((A) < 0x7ff0)) || \
-	(((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16))))
+	((((A) >= 0x7000) && ((A) <= 0x8000 - 16)) || \
+	(((A) >= rtas.base) && ((A) <= (rtas.base + rtas.size - 16))))
 
 static inline struct rtas_error_log *fwnmi_get_errlog(void)
 {
-- 
2.25.1

[PATCH AUTOSEL 5.4 153/266] powerpc/ps3: Fix kexec shutdown hang

[Sasha Levin]

From: Geoff Levand <geoff@infradead.org>

[ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ]

The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine.  By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.

Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.

With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/ps3/mm.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 423be34f0f5f..f42fe4e86ce5 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -200,13 +200,14 @@ void ps3_mm_vas_destroy(void)
 {
 	int result;
 
-	DBG("%s:%d: map.vas_id    = %llu\n", __func__, __LINE__, map.vas_id);
-
 	if (map.vas_id) {
 		result = lv1_select_virtual_address_space(0);
-		BUG_ON(result);
-		result = lv1_destruct_virtual_address_space(map.vas_id);
-		BUG_ON(result);
+		result += lv1_destruct_virtual_address_space(map.vas_id);
+
+		if (result) {
+			lv1_panic(0);
+		}
+
 		map.vas_id = 0;
 	}
 }
@@ -304,19 +305,20 @@ static void ps3_mm_region_destroy(struct mem_region *r)
 	int result;
 
 	if (!r->destroy) {
-		pr_info("%s:%d: Not destroying high region: %llxh %llxh\n",
-			__func__, __LINE__, r->base, r->size);
 		return;
 	}
 
-	DBG("%s:%d: r->base = %llxh\n", __func__, __LINE__, r->base);
-
 	if (r->base) {
 		result = lv1_release_memory(r->base);
-		BUG_ON(result);
+
+		if (result) {
+			lv1_panic(0);
+		}
+
 		r->size = r->base = r->offset = 0;
 		map.total = map.rm.size;
 	}
+
 	ps3_mm_set_repository_highmem(NULL);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 171/266] powerpc/64s/pgtable: fix an undefined behaviour

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit c2e929b18cea6cbf71364f22d742d9aad7f4677a ]

Booting a power9 server with hash MMU could trigger an undefined
behaviour because pud_offset(p4d, 0) will do,

0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)

Fix it by converting pud_index() and friends to static inline
functions.

UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15
shift exponent 34 is too large for 32-bit type 'int'
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
ubsan_epilogue+0x18/0x78
__ubsan_handle_shift_out_of_bounds+0x160/0x21c
walk_pagetables+0x2cc/0x700
walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282
(inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311
ptdump_check_wx+0x8c/0xf0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x194
ret_from_kernel_thread+0x5c/0x74

Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/book3s/64/pgtable.h | 23 ++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index a143d394ff46..e1eb8aa9cfbb 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -998,10 +998,25 @@ extern struct page *pgd_page(pgd_t pgd);
 #define pud_page_vaddr(pud)	__va(pud_val(pud) & ~PUD_MASKED_BITS)
 #define pgd_page_vaddr(pgd)	__va(pgd_val(pgd) & ~PGD_MASKED_BITS)
 
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1))
-#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1))
-#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1))
-#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1))
+static inline unsigned long pgd_index(unsigned long address)
+{
+	return (address >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1);
+}
+
+static inline unsigned long pud_index(unsigned long address)
+{
+	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
+}
+
+static inline unsigned long pmd_index(unsigned long address)
+{
+	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
+static inline unsigned long pte_index(unsigned long address)
+{
+	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
 
 /*
  * Find an entry in a page-table-directory.  We combine the address region
-- 
2.25.1

[PATCH AUTOSEL 5.4 189/266] powerpc/32s: Don't warn when mapping RO data ROX.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 4b19f96a81bceaf0bcf44d79c0855c61158065ec ]

Mapping RO data as ROX is not an issue since that data
cannot be modified to introduce an exploit.

PPC64 accepts to have RO data mapped ROX, as a trade off
between kernel size and strictness of protection.

On PPC32, kernel size is even more critical as amount of
memory is usually small.

Depending on the number of available IBATs, the last IBATs
might overflow the end of text. Only warn if it crosses
the end of RO data.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/book3s32/mmu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 84d5fab94f8f..1424a120710e 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -187,6 +187,7 @@ void mmu_mark_initmem_nx(void)
 	int i;
 	unsigned long base = (unsigned long)_stext - PAGE_OFFSET;
 	unsigned long top = (unsigned long)_etext - PAGE_OFFSET;
+	unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
 	unsigned long size;
 
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S_601))
@@ -201,9 +202,10 @@ void mmu_mark_initmem_nx(void)
 		size = block_size(base, top);
 		size = max(size, 128UL << 10);
 		if ((top - base) > size) {
-			if (strict_kernel_rwx_enabled())
-				pr_warn("Kernel _etext not properly aligned\n");
 			size <<= 1;
+			if (strict_kernel_rwx_enabled() && base + size > border)
+				pr_warn("Some RW data is getting mapped X. "
+					"Adjust CONFIG_DATA_SHIFT to avoid that.\n");
 		}
 		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
 		base += size;
-- 
2.25.1

[PATCH AUTOSEL 5.4 195/266] KVM: PPC: Book3S HV: Ignore kmemleak false positives

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 0aca8a5575544bd21b3363058afb8f1e81505150 ]

kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then
pud_populate() and pmd_populate() will use __pa() to reference the newly
allocated memory.

Since kmemleak is unable to track the physical memory resulting in false
positives, silence those by using kmemleak_ignore().

unreferenced object 0xc000201c382a1000 (size 4096):
 comm "qemu-kvm", pid 124828, jiffies 4295733767 (age 341.250s)
 hex dump (first 32 bytes):
   c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87  .. ..`.... .r...
   c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87  .. ....... .....
 backtrace:
   [<000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv]
   kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366
   (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590
   [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
   [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
   [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
   [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
   [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
   [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
   [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
   [<0000000048155cd6>] ksys_ioctl+0xd8/0x130
   [<0000000041ffeaa7>] sys_ioctl+0x28/0x40
   [<000000004afc4310>] system_call_exception+0x114/0x1e0
   [<00000000fb70a873>] system_call_common+0xf0/0x278
unreferenced object 0xc0002001f0c03900 (size 256):
 comm "qemu-kvm", pid 124830, jiffies 4295735235 (age 326.570s)
 hex dump (first 32 bytes):
   c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87  .. ....... .....
   c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87  .. ....... .....
 backtrace:
   [<0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv]
   kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356
   (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593
   [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
   [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
   [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
   [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
   [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
   [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
   [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
   [<0000000048155cd6>] ksys_ioctl+0xd8/0x130
   [<0000000041ffeaa7>] sys_ioctl+0x28/0x40
   [<000000004afc4310>] system_call_exception+0x114/0x1e0
   [<00000000fb70a873>] system_call_common+0xf0/0x278

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_64_mmu_radix.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 2d415c36a61d..43b56f8f6beb 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -353,7 +353,13 @@ static struct kmem_cache *kvm_pmd_cache;
 
 static pte_t *kvmppc_pte_alloc(void)
 {
-	return kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL);
+	pte_t *pte;
+
+	pte = kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL);
+	/* pmd_populate() will only reference _pa(pte). */
+	kmemleak_ignore(pte);
+
+	return pte;
 }
 
 static void kvmppc_pte_free(pte_t *ptep)
@@ -363,7 +369,13 @@ static void kvmppc_pte_free(pte_t *ptep)
 
 static pmd_t *kvmppc_pmd_alloc(void)
 {
-	return kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL);
+	pmd_t *pmd;
+
+	pmd = kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL);
+	/* pud_populate() will only reference _pa(pmd). */
+	kmemleak_ignore(pmd);
+
+	return pmd;
 }
 
 static void kvmppc_pmd_free(pmd_t *pmdp)
-- 
2.25.1

[PATCH AUTOSEL 5.4 196/266] KVM: PPC: Book3S: Fix some RCU-list locks

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit ab8b65be183180c3eef405d449163964ecc4b571 ]

It is unsafe to traverse kvm->arch.spapr_tce_tables and
stt->iommu_tables without the RCU read lock held. Also, add
cond_resched_rcu() in places with the RCU read lock held that could take
a while to finish.

 arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 no locks held by qemu-kvm/4265.

 stack backtrace:
 CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2
 Call Trace:
 [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable)
 [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
 [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
 [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
 [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
 [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
 [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330
 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130
 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0
 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0
 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200
 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0
 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280
 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278

 ====
 arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 2 locks held by qemu-kvm/4264:
  #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
  #1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]

 ====
 arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by qemu-kvm/4257:
  #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]

 ====
 arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by qemu-kvm/4257:
  #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_64_vio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 5834db0a54c6..03b947429e4d 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -74,6 +74,7 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
 	struct kvmppc_spapr_tce_iommu_table *stit, *tmp;
 	struct iommu_table_group *table_group = NULL;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) {
 
 		table_group = iommu_group_get_iommudata(grp);
@@ -88,7 +89,9 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
 				kref_put(&stit->kref, kvm_spapr_tce_liobn_put);
 			}
 		}
+		cond_resched_rcu();
 	}
+	rcu_read_unlock();
 }
 
 extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
@@ -106,12 +109,14 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 	if (!f.file)
 		return -EBADF;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) {
 		if (stt == f.file->private_data) {
 			found = true;
 			break;
 		}
 	}
+	rcu_read_unlock();
 
 	fdput(f);
 
@@ -144,6 +149,7 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 	if (!tbl)
 		return -EINVAL;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stit, &stt->iommu_tables, next) {
 		if (tbl != stit->tbl)
 			continue;
@@ -151,14 +157,17 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
 		if (!kref_get_unless_zero(&stit->kref)) {
 			/* stit is being destroyed */
 			iommu_tce_table_put(tbl);
+			rcu_read_unlock();
 			return -ENOTTY;
 		}
 		/*
 		 * The table is already known to this KVM, we just increased
 		 * its KVM reference counter and can return.
 		 */
+		rcu_read_unlock();
 		return 0;
 	}
+	rcu_read_unlock();
 
 	stit = kzalloc(sizeof(*stit), GFP_KERNEL);
 	if (!stit) {
@@ -364,18 +373,19 @@ static long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *stt,
 	if (kvmppc_tce_to_ua(stt->kvm, tce, &ua))
 		return H_TOO_HARD;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(stit, &stt->iommu_tables, next) {
 		unsigned long hpa = 0;
 		struct mm_iommu_table_group_mem_t *mem;
 		long shift = stit->tbl->it_page_shift;
 
 		mem = mm_iommu_lookup(stt->kvm->mm, ua, 1ULL << shift);
-		if (!mem)
-			return H_TOO_HARD;
-
-		if (mm_iommu_ua_to_hpa(mem, ua, shift, &hpa))
+		if (!mem || mm_iommu_ua_to_hpa(mem, ua, shift, &hpa)) {
+			rcu_read_unlock();
 			return H_TOO_HARD;
+		}
 	}
+	rcu_read_unlock();
 
 	return H_SUCCESS;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 207/266] powerpc/4xx: Don't unmap NULL mbase

[Sasha Levin]

From: huhai <huhai@tj.kylinos.cn>

[ Upstream commit bcec081ecc940fc38730b29c743bbee661164161 ]

Signed-off-by: huhai <huhai@tj.kylinos.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521072648.1254699-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/4xx/pci.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
index e6e2adcc7b64..c13d64c3b019 100644
--- a/arch/powerpc/platforms/4xx/pci.c
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -1242,7 +1242,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
 	if (mbase == NULL) {
 		printk(KERN_ERR "%pOF: Can't map internal config space !",
 			port->node);
-		goto done;
+		return;
 	}
 
 	while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
@@ -1252,9 +1252,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
 	}
 	if (attempt)
 		port->link = 1;
-done:
 	iounmap(mbase);
-
 }
 
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
-- 
2.25.1

[PATCH AUTOSEL 5.4 209/266] ASoC: fsl_asrc_dma: Fix dma_chan leak when config DMA channel failed

[Sasha Levin]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

[ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ]

fsl_asrc_dma_hw_params() invokes dma_request_channel() or
fsl_asrc_get_dma_channel(), which returns a reference of the specified
dma_chan object to "pair->dma_chan[dir]" with increased refcnt.

The reference counting issue happens in one exception handling path of
fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End,
the function forgets to decrease the refcnt increased by
dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt
leak.

Fix this issue by calling dma_release_channel() when config DMA channel
failed.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_asrc_dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 01052a0808b0..5aee6b8366d2 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -241,6 +241,7 @@ static int fsl_asrc_dma_hw_params(struct snd_pcm_substream *substream,
 	ret = dmaengine_slave_config(pair->dma_chan[dir], &config_be);
 	if (ret) {
 		dev_err(dev, "failed to config DMA channel for Back-End\n");
+		dma_release_channel(pair->dma_chan[dir]);
 		return ret;
 	}
 
-- 
2.25.1