linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
	kvm-ppc@vger.kernel.org, "Anton Blanchard" <anton@linux.ibm.com>,
	"Cédric Le Goater" <clg@kaod.org>,
	"David Gibson" <david@gibson.dropbear.id.au>
Subject: [PATCH 1/3] powerpc: inline doorbell sending functions
Date: Sun, 28 Jun 2020 01:04:26 +1000	[thread overview]
Message-ID: <20200627150428.2525192-2-npiggin@gmail.com> (raw)
In-Reply-To: <20200627150428.2525192-1-npiggin@gmail.com>

These are only called in one place for a given platform, so inline them
for performance.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/dbell.h | 59 ++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/dbell.c      | 55 -----------------------------
 2 files changed, 56 insertions(+), 58 deletions(-)

diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 4ce6808deed3..5c9625e5070b 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -13,6 +13,7 @@
 
 #include <asm/ppc-opcode.h>
 #include <asm/feature-fixups.h>
+#include <asm/kvm_ppc.h>
 
 #define PPC_DBELL_MSG_BRDCAST	(0x04000000)
 #define PPC_DBELL_TYPE(x)	(((x) & 0xf) << (63-36))
@@ -87,9 +88,6 @@ static inline void ppc_msgsync(void)
 
 #endif /* CONFIG_PPC_BOOK3S */
 
-extern void doorbell_global_ipi(int cpu);
-extern void doorbell_core_ipi(int cpu);
-extern int doorbell_try_core_ipi(int cpu);
 extern void doorbell_exception(struct pt_regs *regs);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
@@ -100,4 +98,59 @@ static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
 	_ppc_msgsnd(msg);
 }
 
+/*
+ * Doorbells must only be used if CPU_FTR_DBELL is available.
+ * msgsnd is used in HV, and msgsndp is used in !HV.
+ *
+ * These should be used by platform code that is aware of restrictions.
+ * Other arch code should use ->cause_ipi.
+ *
+ * doorbell_global_ipi() sends a dbell to any target CPU.
+ * Must be used only by architectures that address msgsnd target
+ * by PIR/get_hard_smp_processor_id.
+ */
+static inline void doorbell_global_ipi(int cpu)
+{
+	u32 tag = get_hard_smp_processor_id(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
+ * Must be used only by architectures that address msgsnd target
+ * by TIR/cpu_thread_in_core.
+ */
+static inline void doorbell_core_ipi(int cpu)
+{
+	u32 tag = cpu_thread_in_core(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * Attempt to cause a core doorbell if destination is on the same core.
+ * Returns 1 on success, 0 on failure.
+ */
+static inline int doorbell_try_core_ipi(int cpu)
+{
+	int this_cpu = get_cpu();
+	int ret = 0;
+
+	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
+		doorbell_core_ipi(cpu);
+		ret = 1;
+	}
+
+	put_cpu();
+
+	return ret;
+}
+
 #endif /* _ASM_POWERPC_DBELL_H */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index f17ff1200eaa..52680cf07c9d 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -18,61 +18,6 @@
 
 #ifdef CONFIG_SMP
 
-/*
- * Doorbells must only be used if CPU_FTR_DBELL is available.
- * msgsnd is used in HV, and msgsndp is used in !HV.
- *
- * These should be used by platform code that is aware of restrictions.
- * Other arch code should use ->cause_ipi.
- *
- * doorbell_global_ipi() sends a dbell to any target CPU.
- * Must be used only by architectures that address msgsnd target
- * by PIR/get_hard_smp_processor_id.
- */
-void doorbell_global_ipi(int cpu)
-{
-	u32 tag = get_hard_smp_processor_id(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
- * Must be used only by architectures that address msgsnd target
- * by TIR/cpu_thread_in_core.
- */
-void doorbell_core_ipi(int cpu)
-{
-	u32 tag = cpu_thread_in_core(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * Attempt to cause a core doorbell if destination is on the same core.
- * Returns 1 on success, 0 on failure.
- */
-int doorbell_try_core_ipi(int cpu)
-{
-	int this_cpu = get_cpu();
-	int ret = 0;
-
-	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
-		doorbell_core_ipi(cpu);
-		ret = 1;
-	}
-
-	put_cpu();
-
-	return ret;
-}
-
 void doorbell_exception(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-- 
2.23.0


  reply	other threads:[~2020-06-27 15:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-27 15:04 [PATCH 0/3] powerpc/pseries: IPI doorbell improvements Nicholas Piggin
2020-06-27 15:04 ` Nicholas Piggin [this message]
2020-06-27 19:46   ` [PATCH 1/3] powerpc: inline doorbell sending functions kernel test robot
2020-06-30  1:31     ` Michael Ellerman
2020-06-30  1:58       ` Nicholas Piggin
2020-06-27 15:04 ` [PATCH 2/3] powerpc/pseries: Use doorbells even if XIVE is available Nicholas Piggin
2020-06-27 15:04 ` [PATCH 3/3] powerpc/pseries: Add KVM guest doorbell restrictions Nicholas Piggin
2020-06-30  2:27   ` Paul Mackerras
2020-06-30  5:35     ` Nicholas Piggin
2020-06-30  8:26       ` Paul Mackerras
2020-06-30 11:57         ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200627150428.2525192-2-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=anton@linux.ibm.com \
    --cc=clg@kaod.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).