* [PATCH v2 27/30] misc: cxl: hcalls: Demote half-assed kerneldoc attempt
[not found] <20200701083118.45744-1-lee.jones@linaro.org>
@ 2020-07-01 8:31 ` Lee Jones
2020-07-01 8:31 ` [PATCH v2 28/30] misc: ocxl: config: Provide correct formatting to function headers Lee Jones
2020-07-01 8:31 ` [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer Lee Jones
2 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2020-07-01 8:31 UTC (permalink / raw)
To: arnd, gregkh
Cc: Frederic Barrat, linuxppc-dev, Lee Jones, linux-kernel,
Andrew Donnellan
Function headers will need a lot of work before they reach the
standards expected of kerneldoc. Demote them down to basic
comments/headers, for now at least.
Fixes the following W=1 kernel build warnings:
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'unit_address' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'process_token' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'op' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p1' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p2' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p3' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p4' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'out' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:245: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_afu'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'unit_address' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'process_token' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'unit_address' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'process_token' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'unit_address' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'state' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'offset' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'len' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'cr_num' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'offset' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'len' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'unit_address' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'process_token' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'record' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'reg' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'unit_address' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'value' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'value' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'process_token' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'info' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'process_token' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'control_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'reset_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'op' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p1' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p2' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p3' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p4' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'out' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:516: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'op' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'num' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'out' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'num' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'out' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'unit_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'list_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'num' not described in 'cxl_h_validate_adapter_image'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/misc/cxl/hcalls.c | 42 +++++++++++++++++++--------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/misc/cxl/hcalls.c b/drivers/misc/cxl/hcalls.c
index b7c57f67f4f52..aba5e20eeb1f5 100644
--- a/drivers/misc/cxl/hcalls.c
+++ b/drivers/misc/cxl/hcalls.c
@@ -167,7 +167,7 @@ long cxl_h_attach_process(u64 unit_address,
}
}
-/**
+/*
* cxl_h_detach_process - Detach a process element from a coherent
* platform function.
*/
@@ -197,7 +197,7 @@ long cxl_h_detach_process(u64 unit_address, u64 process_token)
}
}
-/**
+/*
* cxl_h_control_function - This H_CONTROL_CA_FUNCTION hypervisor call allows
* the partition to manipulate or query
* certain coherent platform function behaviors.
@@ -238,7 +238,7 @@ static long cxl_h_control_function(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_reset_afu - Perform a reset to the coherent platform function.
*/
long cxl_h_reset_afu(u64 unit_address)
@@ -249,7 +249,7 @@ long cxl_h_reset_afu(u64 unit_address)
NULL);
}
-/**
+/*
* cxl_h_suspend_process - Suspend a process from being executed
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -262,7 +262,7 @@ long cxl_h_suspend_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_resume_process - Resume a process to be executed
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -275,7 +275,7 @@ long cxl_h_resume_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_read_error_state - Checks the error state of the coherent
* platform function.
* R4 contains the error state
@@ -288,7 +288,7 @@ long cxl_h_read_error_state(u64 unit_address, u64 *state)
state);
}
-/**
+/*
* cxl_h_get_afu_err - collect the AFU error buffer
* Parameter1 = byte offset into error buffer to retrieve, valid values
* are between 0 and (ibm,error-buffer-size - 1)
@@ -304,7 +304,7 @@ long cxl_h_get_afu_err(u64 unit_address, u64 offset,
NULL);
}
-/**
+/*
* cxl_h_get_config - collect configuration record for the
* coherent platform function
* Parameter1 = # of configuration record to retrieve, valid values are
@@ -324,7 +324,7 @@ long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset,
NULL);
}
-/**
+/*
* cxl_h_terminate_process - Terminate the process before completion
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -337,7 +337,7 @@ long cxl_h_terminate_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_collect_vpd - Collect VPD for the coherent platform function.
* Parameter1 = # of VPD record to retrieve, valid values are between 0
* and (ibm,#config-records - 1).
@@ -355,7 +355,7 @@ long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address,
out);
}
-/**
+/*
* cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt
*/
long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg)
@@ -365,7 +365,7 @@ long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg)
0, 0, 0, 0, reg);
}
-/**
+/*
* cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data
* based on an interrupt
* Parameter1 = value to write to the function-wide error interrupt register
@@ -378,7 +378,7 @@ long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value)
NULL);
}
-/**
+/*
* cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of
* an error log
*/
@@ -390,7 +390,7 @@ long cxl_h_get_error_log(u64 unit_address, u64 value)
NULL);
}
-/**
+/*
* cxl_h_collect_int_info - Collect interrupt info about a coherent
* platform function after an interrupt occurred.
*/
@@ -425,7 +425,7 @@ long cxl_h_collect_int_info(u64 unit_address, u64 process_token,
}
}
-/**
+/*
* cxl_h_control_faults - Control the operation of a coherent platform
* function after a fault occurs.
*
@@ -470,7 +470,7 @@ long cxl_h_control_faults(u64 unit_address, u64 process_token,
}
}
-/**
+/*
* cxl_h_control_facility - This H_CONTROL_CA_FACILITY hypervisor call
* allows the partition to manipulate or query
* certain coherent platform facility behaviors.
@@ -509,7 +509,7 @@ static long cxl_h_control_facility(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_reset_adapter - Perform a reset to the coherent platform facility.
*/
long cxl_h_reset_adapter(u64 unit_address)
@@ -520,7 +520,7 @@ long cxl_h_reset_adapter(u64 unit_address)
NULL);
}
-/**
+/*
* cxl_h_collect_vpd - Collect VPD for the coherent platform function.
* Parameter1 = 4K naturally aligned real buffer containing block
* list entries
@@ -536,7 +536,7 @@ long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address,
out);
}
-/**
+/*
* cxl_h_download_facility - This H_DOWNLOAD_CA_FACILITY
* hypervisor call provide platform support for
* downloading a base adapter image to the coherent
@@ -616,7 +616,7 @@ static long cxl_h_download_facility(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_download_adapter_image - Download the base image to the coherent
* platform facility.
*/
@@ -629,7 +629,7 @@ long cxl_h_download_adapter_image(u64 unit_address,
list_address, num, out);
}
-/**
+/*
* cxl_h_validate_adapter_image - Validate the base image in the coherent
* platform facility.
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 28/30] misc: ocxl: config: Provide correct formatting to function headers
[not found] <20200701083118.45744-1-lee.jones@linaro.org>
2020-07-01 8:31 ` [PATCH v2 27/30] misc: cxl: hcalls: Demote half-assed kerneldoc attempt Lee Jones
@ 2020-07-01 8:31 ` Lee Jones
2020-07-01 8:31 ` [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer Lee Jones
2 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2020-07-01 8:31 UTC (permalink / raw)
To: arnd, gregkh
Cc: Frederic Barrat, linuxppc-dev, Lee Jones, linux-kernel,
Andrew Donnellan
A nice attempt was made to provide kerneldoc headers for
read_template_version() and read_afu_lpc_memory_info() however,
the provided formatting does not match what is expected by
kerneldoc.
Fixes the following W=1 warnings:
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'dev' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'fn' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'len' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'version' not described in 'read_template_version'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'dev' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'fn' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'afu' not described in 'read_afu_lpc_memory_info'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/misc/ocxl/config.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
index c8e19bfb5ef90..e3b99a39d207e 100644
--- a/drivers/misc/ocxl/config.c
+++ b/drivers/misc/ocxl/config.c
@@ -273,11 +273,11 @@ static int read_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn,
}
/**
- * Read the template version from the AFU
- * dev: the device for the AFU
- * fn: the AFU offsets
- * len: outputs the template length
- * version: outputs the major<<8,minor version
+ * read_template_version - Read the template version from the AFU
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @len: outputs the template length
+ * @version: outputs the major<<8,minor version
*
* Returns 0 on success, negative on failure
*/
@@ -476,10 +476,10 @@ static int validate_afu(struct pci_dev *dev, struct ocxl_afu_config *afu)
}
/**
- * Populate AFU metadata regarding LPC memory
- * dev: the device for the AFU
- * fn: the AFU offsets
- * afu: the AFU struct to populate the LPC metadata into
+ * read_afu_lpc_memory_info - Populate AFU metadata regarding LPC memory
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @afu: the AFU struct to populate the LPC metadata into
*
* Returns 0 on success, negative on failure
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer
[not found] <20200701083118.45744-1-lee.jones@linaro.org>
2020-07-01 8:31 ` [PATCH v2 27/30] misc: cxl: hcalls: Demote half-assed kerneldoc attempt Lee Jones
2020-07-01 8:31 ` [PATCH v2 28/30] misc: ocxl: config: Provide correct formatting to function headers Lee Jones
@ 2020-07-01 8:31 ` Lee Jones
2020-07-01 13:13 ` Greg KH
2 siblings, 1 reply; 5+ messages in thread
From: Lee Jones @ 2020-07-01 8:31 UTC (permalink / raw)
To: arnd, gregkh
Cc: Frederic Barrat, linuxppc-dev, Lee Jones, linux-kernel,
Andrew Donnellan
The DRC index pointer us updated on an OPCODE_ADD, but never
actually read. Remove the used pointer and shift up OPCODE_ADD
to group with OPCODE_DELETE which also provides a noop.
Fixes the following W=1 kernel build warning:
drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
178 | __be32 *data, drc_index, phandle;
| ^~~~~~~~~
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/misc/cxl/flash.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c
index cb9cca35a2263..24e3dfcc91a74 100644
--- a/drivers/misc/cxl/flash.c
+++ b/drivers/misc/cxl/flash.c
@@ -175,7 +175,7 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
struct update_nodes_workarea *unwa;
u32 action, node_count;
int token, rc, i;
- __be32 *data, drc_index, phandle;
+ __be32 *data, phandle;
char *buf;
token = rtas_token("ibm,update-nodes");
@@ -206,15 +206,12 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
switch (action) {
case OPCODE_DELETE:
+ case OPCODE_ADD:
/* nothing to do */
break;
case OPCODE_UPDATE:
update_node(phandle, scope);
break;
- case OPCODE_ADD:
- /* nothing to do, just move pointer */
- drc_index = *data++;
- break;
}
}
}
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer
2020-07-01 8:31 ` [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer Lee Jones
@ 2020-07-01 13:13 ` Greg KH
2020-07-01 13:31 ` Lee Jones
0 siblings, 1 reply; 5+ messages in thread
From: Greg KH @ 2020-07-01 13:13 UTC (permalink / raw)
To: Lee Jones
Cc: Frederic Barrat, linuxppc-dev, linux-kernel, arnd,
Andrew Donnellan
On Wed, Jul 01, 2020 at 09:31:18AM +0100, Lee Jones wrote:
> The DRC index pointer us updated on an OPCODE_ADD, but never
> actually read. Remove the used pointer and shift up OPCODE_ADD
> to group with OPCODE_DELETE which also provides a noop.
>
> Fixes the following W=1 kernel build warning:
>
> drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
> drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
> 178 | __be32 *data, drc_index, phandle;
> | ^~~~~~~~~
>
> Cc: Frederic Barrat <fbarrat@linux.ibm.com>
> Cc: Andrew Donnellan <ajd@linux.ibm.com>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/misc/cxl/flash.c | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c
> index cb9cca35a2263..24e3dfcc91a74 100644
> --- a/drivers/misc/cxl/flash.c
> +++ b/drivers/misc/cxl/flash.c
> @@ -175,7 +175,7 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
> struct update_nodes_workarea *unwa;
> u32 action, node_count;
> int token, rc, i;
> - __be32 *data, drc_index, phandle;
> + __be32 *data, phandle;
> char *buf;
>
> token = rtas_token("ibm,update-nodes");
> @@ -206,15 +206,12 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
>
> switch (action) {
> case OPCODE_DELETE:
> + case OPCODE_ADD:
> /* nothing to do */
> break;
> case OPCODE_UPDATE:
> update_node(phandle, scope);
> break;
> - case OPCODE_ADD:
> - /* nothing to do, just move pointer */
> - drc_index = *data++;
> - break;
I think this is not correct, as *data++ changes the value there, and so
this changes the logic of the code.
Dropping this one from my queue.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer
2020-07-01 13:13 ` Greg KH
@ 2020-07-01 13:31 ` Lee Jones
0 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2020-07-01 13:31 UTC (permalink / raw)
To: Greg KH; +Cc: Frederic Barrat, linuxppc-dev, linux-kernel, arnd,
Andrew Donnellan
On Wed, 01 Jul 2020, Greg KH wrote:
> On Wed, Jul 01, 2020 at 09:31:18AM +0100, Lee Jones wrote:
> > The DRC index pointer us updated on an OPCODE_ADD, but never
> > actually read. Remove the used pointer and shift up OPCODE_ADD
> > to group with OPCODE_DELETE which also provides a noop.
> >
> > Fixes the following W=1 kernel build warning:
> >
> > drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
> > drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
> > 178 | __be32 *data, drc_index, phandle;
> > | ^~~~~~~~~
> >
> > Cc: Frederic Barrat <fbarrat@linux.ibm.com>
> > Cc: Andrew Donnellan <ajd@linux.ibm.com>
> > Cc: linuxppc-dev@lists.ozlabs.org
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> > drivers/misc/cxl/flash.c | 7 ++-----
> > 1 file changed, 2 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c
> > index cb9cca35a2263..24e3dfcc91a74 100644
> > --- a/drivers/misc/cxl/flash.c
> > +++ b/drivers/misc/cxl/flash.c
> > @@ -175,7 +175,7 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
> > struct update_nodes_workarea *unwa;
> > u32 action, node_count;
> > int token, rc, i;
> > - __be32 *data, drc_index, phandle;
> > + __be32 *data, phandle;
> > char *buf;
> >
> > token = rtas_token("ibm,update-nodes");
> > @@ -206,15 +206,12 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
> >
> > switch (action) {
> > case OPCODE_DELETE:
> > + case OPCODE_ADD:
> > /* nothing to do */
> > break;
> > case OPCODE_UPDATE:
> > update_node(phandle, scope);
> > break;
> > - case OPCODE_ADD:
> > - /* nothing to do, just move pointer */
> > - drc_index = *data++;
> > - break;
>
> I think this is not correct, as *data++ changes the value there, and so
> this changes the logic of the code.
Great spot.
Looks like I overlooked that the pointer itself is being incremented.
> Dropping this one from my queue.
Sounds good.
I'll fix-up and send this separately at a later date.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-01 13:34 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20200701083118.45744-1-lee.jones@linaro.org>
2020-07-01 8:31 ` [PATCH v2 27/30] misc: cxl: hcalls: Demote half-assed kerneldoc attempt Lee Jones
2020-07-01 8:31 ` [PATCH v2 28/30] misc: ocxl: config: Provide correct formatting to function headers Lee Jones
2020-07-01 8:31 ` [PATCH v2 30/30] misc: cxl: flash: Remove unused pointer Lee Jones
2020-07-01 13:13 ` Greg KH
2020-07-01 13:31 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).