From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 1/8] powerpc/uaccess: Add unsafe_copy_from_user
Date: Fri, 8 Jan 2021 21:25:50 -0600 [thread overview]
Message-ID: <20210109032557.13831-2-cmr@codefail.de> (raw)
In-Reply-To: <20210109032557.13831-1-cmr@codefail.de>
Implement raw_copy_from_user_allowed() which assumes that userspace read
access is open. Use this new function to implement raw_copy_from_user().
Finally, wrap the new function to follow the usual "unsafe_" convention
of taking a label argument.
The new raw_copy_from_user_allowed() calls non-inline __copy_tofrom_user()
internally. This is still safe to call inside user access blocks formed
with user_*_access_begin()/user_*_access_end() since asm functions are not
instrumented for tracing.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
arch/powerpc/include/asm/uaccess.h | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 501c9a79038c..698f3a6d6ae5 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -403,38 +403,45 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
}
#endif /* __powerpc64__ */
-static inline unsigned long raw_copy_from_user(void *to,
- const void __user *from, unsigned long n)
+static inline unsigned long
+raw_copy_from_user_allowed(void *to, const void __user *from, unsigned long n)
{
- unsigned long ret;
if (__builtin_constant_p(n) && (n <= 8)) {
- ret = 1;
+ unsigned long ret = 1;
switch (n) {
case 1:
barrier_nospec();
- __get_user_size(*(u8 *)to, from, 1, ret);
+ __get_user_size_allowed(*(u8 *)to, from, 1, ret);
break;
case 2:
barrier_nospec();
- __get_user_size(*(u16 *)to, from, 2, ret);
+ __get_user_size_allowed(*(u16 *)to, from, 2, ret);
break;
case 4:
barrier_nospec();
- __get_user_size(*(u32 *)to, from, 4, ret);
+ __get_user_size_allowed(*(u32 *)to, from, 4, ret);
break;
case 8:
barrier_nospec();
- __get_user_size(*(u64 *)to, from, 8, ret);
+ __get_user_size_allowed(*(u64 *)to, from, 8, ret);
break;
}
if (ret == 0)
return 0;
}
+ return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long ret;
+
barrier_nospec();
allow_read_from_user(from, n);
- ret = __copy_tofrom_user((__force void __user *)to, from, n);
+ ret = raw_copy_from_user_allowed(to, from, n);
prevent_read_from_user(from, n);
return ret;
}
@@ -542,6 +549,9 @@ user_write_access_begin(const void __user *ptr, size_t len)
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
#define unsafe_put_user(x, p, e) __put_user_goto(x, p, e)
+#define unsafe_copy_from_user(d, s, l, e) \
+ unsafe_op_wrap(raw_copy_from_user_allowed(d, s, l), e)
+
#define unsafe_copy_to_user(d, s, l, e) \
do { \
u8 __user *_dst = (u8 __user *)(d); \
--
2.26.1
next prev parent reply other threads:[~2021-01-09 3:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-09 3:25 [PATCH v3 0/8] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-01-09 3:25 ` Christopher M. Riedl [this message]
2021-01-11 13:22 ` [PATCH v3 1/8] powerpc/uaccess: Add unsafe_copy_from_user Christophe Leroy
2021-01-17 17:19 ` Christopher M. Riedl
2021-01-19 2:11 ` Michael Ellerman
2021-01-19 12:33 ` Christophe Leroy
2021-01-19 17:02 ` Christopher M. Riedl
2021-01-19 17:27 ` Christophe Leroy
2021-01-20 5:08 ` Christopher M. Riedl
2021-02-09 14:09 ` Christophe Leroy
2021-01-19 7:29 ` Christophe Leroy
2021-01-09 3:25 ` [PATCH v3 2/8] powerpc/signal: Add unsafe_copy_{vsx,fpr}_from_user() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 3/8] powerpc/signal64: Move non-inline functions out of setup_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 4/8] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-01-11 13:29 ` Christophe Leroy
2021-01-17 17:16 ` Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 5/8] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 6/8] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 7/8] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches Christopher M. Riedl
2021-01-09 3:25 ` [PATCH v3 8/8] powerpc/signal64: Rewrite rt_sigreturn() " Christopher M. Riedl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210109032557.13831-2-cmr@codefail.de \
--to=cmr@codefail.de \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).