[PATCH 0/4] a few KVM patches

[PATCH 0/4] a few KVM patches

[Nicholas Piggin]

These patches are unrelated except touching some of the same code.
The first two fix actual guest exploitable issues, the other two try
to tidy up SLB management slightly.

Thanks,
Nick

Nicholas Piggin (4):
  KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host
    without mixed mode support
  KVM: PPC: Book3S HV: Fix radix guest SLB side channel
  KVM: PPC: Book3S HV: No need to clear radix host SLB before loading
    guest
  KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB

 arch/powerpc/include/asm/kvm_book3s_asm.h |  11 --
 arch/powerpc/kernel/asm-offsets.c         |   3 -
 arch/powerpc/kvm/book3s_hv.c              |  56 ++--------
 arch/powerpc/kvm/book3s_hv_builtin.c      | 108 +-----------------
 arch/powerpc/kvm/book3s_hv_rmhandlers.S   | 129 ++++++++++------------
 5 files changed, 70 insertions(+), 237 deletions(-)

-- 
2.23.0

[PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Nicholas Piggin]

This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
guests on POWER9 radix hosts"), which was required to run HPT guests on
RPT hosts on early POWER9 CPUs without support for "mixed mode", which
meant the host could not run with MMU on while guests were running.

This code has some corner case bugs, e.g., when the guest hits a machine
check or HMI the primary locks up waiting for secondaries to switch LPCR
to host, which they never do. This could all be fixed in software, but
most CPUs in production have mixed mode support, and those that don't
are believed to be all in installations that don't use this capability.
So simplify things and remove support.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/kvm_book3s_asm.h |  11 ---
 arch/powerpc/kernel/asm-offsets.c         |   3 -
 arch/powerpc/kvm/book3s_hv.c              |  56 +++--------
 arch/powerpc/kvm/book3s_hv_builtin.c      | 108 +---------------------
 arch/powerpc/kvm/book3s_hv_rmhandlers.S   |  80 ++++------------
 5 files changed, 32 insertions(+), 226 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index 078f4648ea27..b6d31bff5209 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -74,16 +74,6 @@ struct kvm_split_mode {
 	u8		do_nap;
 	u8		napped[MAX_SMT_THREADS];
 	struct kvmppc_vcore *vc[MAX_SUBCORES];
-	/* Bits for changing lpcr on P9 */
-	unsigned long	lpcr_req;
-	unsigned long	lpidr_req;
-	unsigned long	host_lpcr;
-	u32		do_set;
-	u32		do_restore;
-	union {
-		u32	allphases;
-		u8	phase[4];
-	} lpcr_sync;
 };
 
 /*
@@ -110,7 +100,6 @@ struct kvmppc_host_state {
 	u8 hwthread_state;
 	u8 host_ipi;
 	u8 ptid;		/* thread number within subcore when split */
-	u8 tid;			/* thread number within whole core */
 	u8 fake_suspend;
 	struct kvm_vcpu *kvm_vcpu;
 	struct kvmppc_vcore *kvm_vcore;
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b12d7c049bfe..489a22cf1a92 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -668,7 +668,6 @@ int main(void)
 	HSTATE_FIELD(HSTATE_SAVED_XIRR, saved_xirr);
 	HSTATE_FIELD(HSTATE_HOST_IPI, host_ipi);
 	HSTATE_FIELD(HSTATE_PTID, ptid);
-	HSTATE_FIELD(HSTATE_TID, tid);
 	HSTATE_FIELD(HSTATE_FAKE_SUSPEND, fake_suspend);
 	HSTATE_FIELD(HSTATE_MMCR0, host_mmcr[0]);
 	HSTATE_FIELD(HSTATE_MMCR1, host_mmcr[1]);
@@ -698,8 +697,6 @@ int main(void)
 	OFFSET(KVM_SPLIT_LDBAR, kvm_split_mode, ldbar);
 	OFFSET(KVM_SPLIT_DO_NAP, kvm_split_mode, do_nap);
 	OFFSET(KVM_SPLIT_NAPPED, kvm_split_mode, napped);
-	OFFSET(KVM_SPLIT_DO_SET, kvm_split_mode, do_set);
-	OFFSET(KVM_SPLIT_DO_RESTORE, kvm_split_mode, do_restore);
 #endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
 
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6f612d240392..2d8627dbd9f6 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -134,7 +134,7 @@ static inline bool nesting_enabled(struct kvm *kvm)
 }
 
 /* If set, the threads on each CPU core have to be in the same MMU mode */
-static bool no_mixing_hpt_and_radix;
+static bool no_mixing_hpt_and_radix __read_mostly;
 
 static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu);
 
@@ -2862,11 +2862,6 @@ static bool can_dynamic_split(struct kvmppc_vcore *vc, struct core_info *cip)
 	if (one_vm_per_core && vc->kvm != cip->vc[0]->kvm)
 		return false;
 
-	/* Some POWER9 chips require all threads to be in the same MMU mode */
-	if (no_mixing_hpt_and_radix &&
-	    kvm_is_radix(vc->kvm) != kvm_is_radix(cip->vc[0]->kvm))
-		return false;
-
 	if (n_threads < cip->max_subcore_threads)
 		n_threads = cip->max_subcore_threads;
 	if (!subcore_config_ok(cip->n_subcores + 1, n_threads))
@@ -2905,6 +2900,9 @@ static void prepare_threads(struct kvmppc_vcore *vc)
 	for_each_runnable_thread(i, vcpu, vc) {
 		if (signal_pending(vcpu->arch.run_task))
 			vcpu->arch.ret = -EINTR;
+		else if (no_mixing_hpt_and_radix &&
+			 kvm_is_radix(vc->kvm) != radix_enabled())
+			vcpu->arch.ret = -EINVAL;
 		else if (vcpu->arch.vpa.update_pending ||
 			 vcpu->arch.slb_shadow.update_pending ||
 			 vcpu->arch.dtl.update_pending)
@@ -3110,7 +3108,6 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	int controlled_threads;
 	int trap;
 	bool is_power8;
-	bool hpt_on_radix;
 
 	/*
 	 * Remove from the list any threads that have a signal pending
@@ -3143,11 +3140,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	 * this is a HPT guest on a radix host machine where the
 	 * CPU threads may not be in different MMU modes.
 	 */
-	hpt_on_radix = no_mixing_hpt_and_radix && radix_enabled() &&
-		!kvm_is_radix(vc->kvm);
-	if (((controlled_threads > 1) &&
-	     ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) ||
-	    (hpt_on_radix && vc->kvm->arch.threads_indep)) {
+	if ((controlled_threads > 1) &&
+	    ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
 		for_each_runnable_thread(i, vcpu, vc) {
 			vcpu->arch.ret = -EBUSY;
 			kvmppc_remove_runnable(vc, vcpu);
@@ -3215,7 +3209,7 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	is_power8 = cpu_has_feature(CPU_FTR_ARCH_207S)
 		&& !cpu_has_feature(CPU_FTR_ARCH_300);
 
-	if (split > 1 || hpt_on_radix) {
+	if (split > 1) {
 		sip = &split_info;
 		memset(&split_info, 0, sizeof(split_info));
 		for (sub = 0; sub < core_info.n_subcores; ++sub)
@@ -3237,13 +3231,6 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 			split_info.subcore_size = subcore_size;
 		} else {
 			split_info.subcore_size = 1;
-			if (hpt_on_radix) {
-				/* Use the split_info for LPCR/LPIDR changes */
-				split_info.lpcr_req = vc->lpcr;
-				split_info.lpidr_req = vc->kvm->arch.lpid;
-				split_info.host_lpcr = vc->kvm->arch.host_lpcr;
-				split_info.do_set = 1;
-			}
 		}
 
 		/* order writes to split_info before kvm_split_mode pointer */
@@ -3253,7 +3240,6 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	for (thr = 0; thr < controlled_threads; ++thr) {
 		struct paca_struct *paca = paca_ptrs[pcpu + thr];
 
-		paca->kvm_hstate.tid = thr;
 		paca->kvm_hstate.napping = 0;
 		paca->kvm_hstate.kvm_split_mode = sip;
 	}
@@ -3327,10 +3313,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	 * When doing micro-threading, poke the inactive threads as well.
 	 * This gets them to the nap instruction after kvm_do_nap,
 	 * which reduces the time taken to unsplit later.
-	 * For POWER9 HPT guest on radix host, we need all the secondary
-	 * threads woken up so they can do the LPCR/LPIDR change.
 	 */
-	if (cmd_bit || hpt_on_radix) {
+	if (cmd_bit) {
 		split_info.do_nap = 1;	/* ask secondaries to nap when done */
 		for (thr = 1; thr < threads_per_subcore; ++thr)
 			if (!(active & (1 << thr)))
@@ -3391,19 +3375,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 			cpu_relax();
 			++loops;
 		}
-	} else if (hpt_on_radix) {
-		/* Wait for all threads to have seen final sync */
-		for (thr = 1; thr < controlled_threads; ++thr) {
-			struct paca_struct *paca = paca_ptrs[pcpu + thr];
-
-			while (paca->kvm_hstate.kvm_split_mode) {
-				HMT_low();
-				barrier();
-			}
-			HMT_medium();
-		}
+		split_info.do_nap = 0;
 	}
-	split_info.do_nap = 0;
 
 	kvmppc_set_host_core(pcpu);
 
@@ -4173,7 +4146,6 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 
 	kvmppc_clear_host_core(pcpu);
 
-	local_paca->kvm_hstate.tid = 0;
 	local_paca->kvm_hstate.napping = 0;
 	local_paca->kvm_hstate.kvm_split_mode = NULL;
 	kvmppc_start_thread(vcpu, vc);
@@ -4358,15 +4330,11 @@ static int kvmppc_vcpu_run_hv(struct kvm_vcpu *vcpu)
 
 	do {
 		/*
-		 * The early POWER9 chips that can't mix radix and HPT threads
-		 * on the same core also need the workaround for the problem
-		 * where the TLB would prefetch entries in the guest exit path
-		 * for radix guests using the guest PIDR value and LPID 0.
-		 * The workaround is in the old path (kvmppc_run_vcpu())
-		 * but not the new path (kvmhv_run_single_vcpu()).
+		 * The TLB prefetch bug fixup is only in the kvmppc_run_vcpu
+		 * path, which also handles hash and dependent threads mode.
 		 */
 		if (kvm->arch.threads_indep && kvm_is_radix(kvm) &&
-		    !no_mixing_hpt_and_radix)
+		    !cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG))
 			r = kvmhv_run_single_vcpu(vcpu, ~(u64)0,
 						  vcpu->arch.vcore->lpcr);
 		else
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 8053efdf7ea7..f3d3183249fe 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -277,8 +277,7 @@ void kvmhv_commence_exit(int trap)
 	struct kvmppc_vcore *vc = local_paca->kvm_hstate.kvm_vcore;
 	int ptid = local_paca->kvm_hstate.ptid;
 	struct kvm_split_mode *sip = local_paca->kvm_hstate.kvm_split_mode;
-	int me, ee, i, t;
-	int cpu0;
+	int me, ee, i;
 
 	/* Set our bit in the threads-exiting-guest map in the 0xff00
 	   bits of vcore->entry_exit_map */
@@ -320,22 +319,6 @@ void kvmhv_commence_exit(int trap)
 		if ((ee >> 8) == 0)
 			kvmhv_interrupt_vcore(vc, ee);
 	}
-
-	/*
-	 * On POWER9 when running a HPT guest on a radix host (sip != NULL),
-	 * we have to interrupt inactive CPU threads to get them to
-	 * restore the host LPCR value.
-	 */
-	if (sip->lpcr_req) {
-		if (cmpxchg(&sip->do_restore, 0, 1) == 0) {
-			vc = local_paca->kvm_hstate.kvm_vcore;
-			cpu0 = vc->pcpu + ptid - local_paca->kvm_hstate.tid;
-			for (t = 1; t < threads_per_core; ++t) {
-				if (sip->napped[t])
-					kvmhv_rm_send_ipi(cpu0 + t);
-			}
-		}
-	}
 }
 
 struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv;
@@ -667,95 +650,6 @@ void kvmppc_bad_interrupt(struct pt_regs *regs)
 	panic("Bad KVM trap");
 }
 
-/*
- * Functions used to switch LPCR HR and UPRT bits on all threads
- * when entering and exiting HPT guests on a radix host.
- */
-
-#define PHASE_REALMODE		1	/* in real mode */
-#define PHASE_SET_LPCR		2	/* have set LPCR */
-#define PHASE_OUT_OF_GUEST	4	/* have finished executing in guest */
-#define PHASE_RESET_LPCR	8	/* have reset LPCR to host value */
-
-#define ALL(p)		(((p) << 24) | ((p) << 16) | ((p) << 8) | (p))
-
-static void wait_for_sync(struct kvm_split_mode *sip, int phase)
-{
-	int thr = local_paca->kvm_hstate.tid;
-
-	sip->lpcr_sync.phase[thr] |= phase;
-	phase = ALL(phase);
-	while ((sip->lpcr_sync.allphases & phase) != phase) {
-		HMT_low();
-		barrier();
-	}
-	HMT_medium();
-}
-
-void kvmhv_p9_set_lpcr(struct kvm_split_mode *sip)
-{
-	int num_sets;
-	unsigned long rb, set;
-
-	/* wait for every other thread to get to real mode */
-	wait_for_sync(sip, PHASE_REALMODE);
-
-	/* Set LPCR and LPIDR */
-	mtspr(SPRN_LPCR, sip->lpcr_req);
-	mtspr(SPRN_LPID, sip->lpidr_req);
-	isync();
-
-	/*
-	 * P10 will flush all the congruence class with a single tlbiel
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_31))
-		num_sets =  1;
-	else
-		num_sets = POWER9_TLB_SETS_RADIX;
-
-	/* Invalidate the TLB on thread 0 */
-	if (local_paca->kvm_hstate.tid == 0) {
-		sip->do_set = 0;
-		asm volatile("ptesync" : : : "memory");
-		for (set = 0; set < num_sets; ++set) {
-			rb = TLBIEL_INVAL_SET_LPID +
-				(set << TLBIEL_INVAL_SET_SHIFT);
-			asm volatile(PPC_TLBIEL(%0, %1, 0, 0, 0) : :
-				     "r" (rb), "r" (0));
-		}
-		asm volatile("ptesync" : : : "memory");
-	}
-
-	/* indicate that we have done so and wait for others */
-	wait_for_sync(sip, PHASE_SET_LPCR);
-	/* order read of sip->lpcr_sync.allphases vs. sip->do_set */
-	smp_rmb();
-}
-
-/*
- * Called when a thread that has been in the guest needs
- * to reload the host LPCR value - but only on POWER9 when
- * running a HPT guest on a radix host.
- */
-void kvmhv_p9_restore_lpcr(struct kvm_split_mode *sip)
-{
-	/* we're out of the guest... */
-	wait_for_sync(sip, PHASE_OUT_OF_GUEST);
-
-	mtspr(SPRN_LPID, 0);
-	mtspr(SPRN_LPCR, sip->host_lpcr);
-	isync();
-
-	if (local_paca->kvm_hstate.tid == 0) {
-		sip->do_restore = 0;
-		smp_wmb();	/* order store of do_restore vs. phase */
-	}
-
-	wait_for_sync(sip, PHASE_RESET_LPCR);
-	smp_mb();
-	local_paca->kvm_hstate.kvm_split_mode = NULL;
-}
-
 static void kvmppc_end_cede(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.ceded = 0;
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index cd9995ee8441..d5a9b57ec129 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -85,19 +85,6 @@ _GLOBAL_TOC(kvmppc_hv_entry_trampoline)
 	RFI_TO_KERNEL
 
 kvmppc_call_hv_entry:
-BEGIN_FTR_SECTION
-	/* On P9, do LPCR setting, if necessary */
-	ld	r3, HSTATE_SPLIT_MODE(r13)
-	cmpdi	r3, 0
-	beq	46f
-	lwz	r4, KVM_SPLIT_DO_SET(r3)
-	cmpwi	r4, 0
-	beq	46f
-	bl	kvmhv_p9_set_lpcr
-	nop
-46:
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
-
 	ld	r4, HSTATE_KVM_VCPU(r13)
 	bl	kvmppc_hv_entry
 
@@ -361,11 +348,11 @@ kvm_secondary_got_guest:
 	LOAD_REG_ADDR(r6, decrementer_max)
 	ld	r6, 0(r6)
 	mtspr	SPRN_HDEC, r6
+BEGIN_FTR_SECTION
 	/* and set per-LPAR registers, if doing dynamic micro-threading */
 	ld	r6, HSTATE_SPLIT_MODE(r13)
 	cmpdi	r6, 0
 	beq	63f
-BEGIN_FTR_SECTION
 	ld	r0, KVM_SPLIT_RPR(r6)
 	mtspr	SPRN_RPR, r0
 	ld	r0, KVM_SPLIT_PMMAR(r6)
@@ -373,16 +360,7 @@ BEGIN_FTR_SECTION
 	ld	r0, KVM_SPLIT_LDBAR(r6)
 	mtspr	SPRN_LDBAR, r0
 	isync
-FTR_SECTION_ELSE
-	/* On P9 we use the split_info for coordinating LPCR changes */
-	lwz	r4, KVM_SPLIT_DO_SET(r6)
-	cmpwi	r4, 0
-	beq	1f
-	mr	r3, r6
-	bl	kvmhv_p9_set_lpcr
-	nop
-1:
-ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 63:
 	/* Order load of vcpu after load of vcore */
 	lwsync
@@ -452,19 +430,15 @@ kvm_no_guest:
 	mtcr	r5
 	blr
 
-53:	HMT_LOW
+53:
+BEGIN_FTR_SECTION
+	HMT_LOW
 	ld	r5, HSTATE_KVM_VCORE(r13)
 	cmpdi	r5, 0
 	bne	60f
 	ld	r3, HSTATE_SPLIT_MODE(r13)
 	cmpdi	r3, 0
 	beq	kvm_no_guest
-	lwz	r0, KVM_SPLIT_DO_SET(r3)
-	cmpwi	r0, 0
-	bne	kvmhv_do_set
-	lwz	r0, KVM_SPLIT_DO_RESTORE(r3)
-	cmpwi	r0, 0
-	bne	kvmhv_do_restore
 	lbz	r0, KVM_SPLIT_DO_NAP(r3)
 	cmpwi	r0, 0
 	beq	kvm_no_guest
@@ -472,24 +446,19 @@ kvm_no_guest:
 	b	kvm_unsplit_nap
 60:	HMT_MEDIUM
 	b	kvm_secondary_got_guest
+FTR_SECTION_ELSE
+	HMT_LOW
+	ld	r5, HSTATE_KVM_VCORE(r13)
+	cmpdi	r5, 0
+	beq	kvm_no_guest
+	HMT_MEDIUM
+	b	kvm_secondary_got_guest
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
 
 54:	li	r0, KVM_HWTHREAD_IN_KVM
 	stb	r0, HSTATE_HWTHREAD_STATE(r13)
 	b	kvm_no_guest
 
-kvmhv_do_set:
-	/* Set LPCR, LPIDR etc. on P9 */
-	HMT_MEDIUM
-	bl	kvmhv_p9_set_lpcr
-	nop
-	b	kvm_no_guest
-
-kvmhv_do_restore:
-	HMT_MEDIUM
-	bl	kvmhv_p9_restore_lpcr
-	nop
-	b	kvm_no_guest
-
 /*
  * Here the primary thread is trying to return the core to
  * whole-core mode, so we need to nap.
@@ -527,7 +496,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	/* Set kvm_split_mode.napped[tid] = 1 */
 	ld	r3, HSTATE_SPLIT_MODE(r13)
 	li	r0, 1
-	lbz	r4, HSTATE_TID(r13)
+	lhz	r4, PACAPACAINDEX(r13)
+	clrldi	r4, r4, 61	/* micro-threading => P8 => 8 threads/core */
 	addi	r4, r4, KVM_SPLIT_NAPPED
 	stbx	r0, r3, r4
 	/* Check the do_nap flag again after setting napped[] */
@@ -1938,24 +1908,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 19:	lis	r8,0x7fff		/* MAX_INT@h */
 	mtspr	SPRN_HDEC,r8
 
-16:
-BEGIN_FTR_SECTION
-	/* On POWER9 with HPT-on-radix we need to wait for all other threads */
-	ld	r3, HSTATE_SPLIT_MODE(r13)
-	cmpdi	r3, 0
-	beq	47f
-	lwz	r8, KVM_SPLIT_DO_RESTORE(r3)
-	cmpwi	r8, 0
-	beq	47f
-	bl	kvmhv_p9_restore_lpcr
-	nop
-	b	48f
-47:
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
-	ld	r8,KVM_HOST_LPCR(r4)
+16:	ld	r8,KVM_HOST_LPCR(r4)
 	mtspr	SPRN_LPCR,r8
 	isync
-48:
+
 #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
 	/* Finish timing, if we have a vcpu */
 	ld	r4, HSTATE_KVM_VCPU(r13)
@@ -2779,8 +2735,10 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 	beq	kvm_end_cede
 	cmpwi	r0, NAPPING_NOVCPU
 	beq	kvm_novcpu_wakeup
+BEGIN_FTR_SECTION
 	cmpwi	r0, NAPPING_UNSPLIT
 	beq	kvm_unsplit_wakeup
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 	twi	31,0,0 /* Nap state must not be zero */
 
 33:	mr	r4, r3
-- 
2.23.0

Re: [PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Fabiano Rosas]

Resending because the previous got spam-filtered:

Nicholas Piggin <npiggin@gmail.com> writes:

> This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
> guests on POWER9 radix hosts"), which was required to run HPT guests on
> RPT hosts on early POWER9 CPUs without support for "mixed mode", which
> meant the host could not run with MMU on while guests were running.
>
> This code has some corner case bugs, e.g., when the guest hits a machine
> check or HMI the primary locks up waiting for secondaries to switch LPCR
> to host, which they never do. This could all be fixed in software, but
> most CPUs in production have mixed mode support, and those that don't
> are believed to be all in installations that don't use this capability.
> So simplify things and remove support.

With this patch in a DD2.1 machine + indep_threads_mode=N +
disable_radix, QEMU aborts and dumps registers, is that intended?

Could we use the 'no_mixing_hpt_and_radix' logic in check_extension to
advertise only KVM_CAP_PPC_MMU_RADIX to the guest via OV5 so it doesn't
try to run hash?

For instance, if I hack QEMU's 'spapr_dt_ov5_platform_support' from
OV5_MMU_BOTH to OV5_MMU_RADIX_300 then it boots succesfuly, but the
guest turns into radix, due to this code in prom_init:

prom_parse_mmu_model:

case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
	prom_debug("MMU - radix only\n");
	if (prom_radix_disable) {
		/*
		 * If we __have__ to do radix, we're better off ignoring
		 * the command line rather than not booting.
		 */
		prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
	}
	support->radix_mmu = true;
	break;

It seems we could explicitly say that the host does not support hash and
that would align with the above code.

>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---

Re: [PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Nicholas Piggin]

Excerpts from Fabiano Rosas's message of January 19, 2021 11:46 am:
> Resending because the previous got spam-filtered:
> 
> Nicholas Piggin <npiggin@gmail.com> writes:
> 
>> This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
>> guests on POWER9 radix hosts"), which was required to run HPT guests on
>> RPT hosts on early POWER9 CPUs without support for "mixed mode", which
>> meant the host could not run with MMU on while guests were running.
>>
>> This code has some corner case bugs, e.g., when the guest hits a machine
>> check or HMI the primary locks up waiting for secondaries to switch LPCR
>> to host, which they never do. This could all be fixed in software, but
>> most CPUs in production have mixed mode support, and those that don't
>> are believed to be all in installations that don't use this capability.
>> So simplify things and remove support.
> 
> With this patch in a DD2.1 machine + indep_threads_mode=N +
> disable_radix, QEMU aborts and dumps registers, is that intended?

Yes. That configuration is hanging handling MCEs in the guest with some 
threads waiting forever to synchronize. Paul suggested it was never a
supported configuration so we might just remove it.

> Could we use the 'no_mixing_hpt_and_radix' logic in check_extension to
> advertise only KVM_CAP_PPC_MMU_RADIX to the guest via OV5 so it doesn't
> try to run hash?
> 
> For instance, if I hack QEMU's 'spapr_dt_ov5_platform_support' from
> OV5_MMU_BOTH to OV5_MMU_RADIX_300 then it boots succesfuly, but the
> guest turns into radix, due to this code in prom_init:
> 
> prom_parse_mmu_model:
> 
> case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
> 	prom_debug("MMU - radix only\n");
> 	if (prom_radix_disable) {
> 		/*
> 		 * If we __have__ to do radix, we're better off ignoring
> 		 * the command line rather than not booting.
> 		 */
> 		prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
> 	}
> 	support->radix_mmu = true;
> 	break;
> 
> It seems we could explicitly say that the host does not support hash and
> that would align with the above code.

I'm not sure, sounds like you could, on the other hand these aborts seem 
like the prefered failure mode for these kinds of configuration issues, 
I don't know what the policy is, is reverting back to radix acceptable?

Thanks,
Nick

Re: [PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Fabiano Rosas]

Nicholas Piggin <npiggin@gmail.com> writes:

> Excerpts from Fabiano Rosas's message of January 19, 2021 11:46 am:
>> Resending because the previous got spam-filtered:
>> 
>> Nicholas Piggin <npiggin@gmail.com> writes:
>> 
>>> This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
>>> guests on POWER9 radix hosts"), which was required to run HPT guests on
>>> RPT hosts on early POWER9 CPUs without support for "mixed mode", which
>>> meant the host could not run with MMU on while guests were running.
>>>
>>> This code has some corner case bugs, e.g., when the guest hits a machine
>>> check or HMI the primary locks up waiting for secondaries to switch LPCR
>>> to host, which they never do. This could all be fixed in software, but
>>> most CPUs in production have mixed mode support, and those that don't
>>> are believed to be all in installations that don't use this capability.
>>> So simplify things and remove support.
>> 
>> With this patch in a DD2.1 machine + indep_threads_mode=N +
>> disable_radix, QEMU aborts and dumps registers, is that intended?
>
> Yes. That configuration is hanging handling MCEs in the guest with some 
> threads waiting forever to synchronize. Paul suggested it was never a
> supported configuration so we might just remove it.
>

OK, so:

Tested-by: Fabiano Rosas <farosas@linux.ibm.com>

>> Could we use the 'no_mixing_hpt_and_radix' logic in check_extension to
>> advertise only KVM_CAP_PPC_MMU_RADIX to the guest via OV5 so it doesn't
>> try to run hash?
>> 
>> For instance, if I hack QEMU's 'spapr_dt_ov5_platform_support' from
>> OV5_MMU_BOTH to OV5_MMU_RADIX_300 then it boots succesfuly, but the
>> guest turns into radix, due to this code in prom_init:
>> 
>> prom_parse_mmu_model:
>> 
>> case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
>> 	prom_debug("MMU - radix only\n");
>> 	if (prom_radix_disable) {
>> 		/*
>> 		 * If we __have__ to do radix, we're better off ignoring
>> 		 * the command line rather than not booting.
>> 		 */
>> 		prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
>> 	}
>> 	support->radix_mmu = true;
>> 	break;
>> 
>> It seems we could explicitly say that the host does not support hash and
>> that would align with the above code.
>
> I'm not sure, sounds like you could, on the other hand these aborts seem 
> like the prefered failure mode for these kinds of configuration issues, 
> I don't know what the policy is, is reverting back to radix acceptable?
>

Yeah, I couldn't find documentation about why we're reverting back to
radix. I personally dislike it, but there is already a precedent so I'm
not sure. A radix guest on a hash host does the same transparent
conversion AFAICT.

But despite that, this patch removes support for hash MMU in this
particular scenario. I don't see why continuing to tell the guest we
support hash.

Anyway, here's a patch if you decide to go that way (tested w/ DD2.1 &
2.3 machines):

---
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 0a056c64c317b..53743555676d6 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -314,6 +314,7 @@ struct kvmppc_ops {
 			      int size);
 	int (*enable_svm)(struct kvm *kvm);
 	int (*svm_off)(struct kvm *kvm);
+	bool (*hash_possible)(void);
 };
 
 extern struct kvmppc_ops *kvmppc_hv_ops;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6f612d240392f..2d1e8aba22b85 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5599,6 +5599,15 @@ static int kvmhv_svm_off(struct kvm *kvm)
 	return ret;
 }
 
+static bool kvmppc_hash_possible(void)
+{
+	if (radix_enabled() && no_mixing_hpt_and_radix)
+		return false;
+
+	return cpu_has_feature(CPU_FTR_ARCH_300) &&
+		cpu_has_feature(CPU_FTR_HVMODE);
+}
+
 static struct kvmppc_ops kvm_ops_hv = {
 	.get_sregs = kvm_arch_vcpu_ioctl_get_sregs_hv,
 	.set_sregs = kvm_arch_vcpu_ioctl_set_sregs_hv,
@@ -5642,6 +5651,7 @@ static struct kvmppc_ops kvm_ops_hv = {
 	.store_to_eaddr = kvmhv_store_to_eaddr,
 	.enable_svm = kvmhv_enable_svm,
 	.svm_off = kvmhv_svm_off,
+	.hash_possible = kvmppc_hash_possible,
 };
 
 static int kvm_init_subcore_bitmap(void)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index cf52d26f49cd7..99ced6c570e74 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -611,8 +611,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = !!(hv_enabled && radix_enabled());
 		break;
 	case KVM_CAP_PPC_MMU_HASH_V3:
-		r = !!(hv_enabled && cpu_has_feature(CPU_FTR_ARCH_300) &&
-		       cpu_has_feature(CPU_FTR_HVMODE));
+		r = !!(hv_enabled && kvmppc_hv_ops->hash_possible());
 		break;
 	case KVM_CAP_PPC_NESTED_HV:
 		r = !!(hv_enabled && kvmppc_hv_ops->enable_nested &&
---

https://github.com/farosas/linux/commit/0ae6c65ba9592c23215899c473acf392bd6e36d5.patch


> Thanks,
> Nick

Re: [PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Nicholas Piggin]

Excerpts from Fabiano Rosas's message of January 20, 2021 7:07 am:
> Nicholas Piggin <npiggin@gmail.com> writes:
> 
>> Excerpts from Fabiano Rosas's message of January 19, 2021 11:46 am:
>>> Resending because the previous got spam-filtered:
>>> 
>>> Nicholas Piggin <npiggin@gmail.com> writes:
>>> 
>>>> This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
>>>> guests on POWER9 radix hosts"), which was required to run HPT guests on
>>>> RPT hosts on early POWER9 CPUs without support for "mixed mode", which
>>>> meant the host could not run with MMU on while guests were running.
>>>>
>>>> This code has some corner case bugs, e.g., when the guest hits a machine
>>>> check or HMI the primary locks up waiting for secondaries to switch LPCR
>>>> to host, which they never do. This could all be fixed in software, but
>>>> most CPUs in production have mixed mode support, and those that don't
>>>> are believed to be all in installations that don't use this capability.
>>>> So simplify things and remove support.
>>> 
>>> With this patch in a DD2.1 machine + indep_threads_mode=N +
>>> disable_radix, QEMU aborts and dumps registers, is that intended?
>>
>> Yes. That configuration is hanging handling MCEs in the guest with some 
>> threads waiting forever to synchronize. Paul suggested it was never a
>> supported configuration so we might just remove it.
>>
> 
> OK, so:
> 
> Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
> 
>>> Could we use the 'no_mixing_hpt_and_radix' logic in check_extension to
>>> advertise only KVM_CAP_PPC_MMU_RADIX to the guest via OV5 so it doesn't
>>> try to run hash?
>>> 
>>> For instance, if I hack QEMU's 'spapr_dt_ov5_platform_support' from
>>> OV5_MMU_BOTH to OV5_MMU_RADIX_300 then it boots succesfuly, but the
>>> guest turns into radix, due to this code in prom_init:
>>> 
>>> prom_parse_mmu_model:
>>> 
>>> case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
>>> 	prom_debug("MMU - radix only\n");
>>> 	if (prom_radix_disable) {
>>> 		/*
>>> 		 * If we __have__ to do radix, we're better off ignoring
>>> 		 * the command line rather than not booting.
>>> 		 */
>>> 		prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
>>> 	}
>>> 	support->radix_mmu = true;
>>> 	break;
>>> 
>>> It seems we could explicitly say that the host does not support hash and
>>> that would align with the above code.
>>
>> I'm not sure, sounds like you could, on the other hand these aborts seem 
>> like the prefered failure mode for these kinds of configuration issues, 
>> I don't know what the policy is, is reverting back to radix acceptable?
>>
> 
> Yeah, I couldn't find documentation about why we're reverting back to
> radix. I personally dislike it, but there is already a precedent so I'm
> not sure. A radix guest on a hash host does the same transparent
> conversion AFAICT.
> 
> But despite that, this patch removes support for hash MMU in this
> particular scenario. I don't see why continuing to tell the guest we
> support hash.
> 
> Anyway, here's a patch if you decide to go that way (tested w/ DD2.1 &
> 2.3 machines):

Thanks, I don't mind it, have to see if the maintainer will take it :)

You could add a small changelog / SOB and I could putit after my patch?

> 
> ---
> diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
> index 0a056c64c317b..53743555676d6 100644
> --- a/arch/powerpc/include/asm/kvm_ppc.h
> +++ b/arch/powerpc/include/asm/kvm_ppc.h
> @@ -314,6 +314,7 @@ struct kvmppc_ops {
>  			      int size);
>  	int (*enable_svm)(struct kvm *kvm);
>  	int (*svm_off)(struct kvm *kvm);
> +	bool (*hash_possible)(void);
>  };
>  
>  extern struct kvmppc_ops *kvmppc_hv_ops;
> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
> index 6f612d240392f..2d1e8aba22b85 100644
> --- a/arch/powerpc/kvm/book3s_hv.c
> +++ b/arch/powerpc/kvm/book3s_hv.c
> @@ -5599,6 +5599,15 @@ static int kvmhv_svm_off(struct kvm *kvm)
>  	return ret;
>  }
>  
> +static bool kvmppc_hash_possible(void)
> +{
> +	if (radix_enabled() && no_mixing_hpt_and_radix)
> +		return false;
> +
> +	return cpu_has_feature(CPU_FTR_ARCH_300) &&
> +		cpu_has_feature(CPU_FTR_HVMODE);
> +}

Just be careful, it's hash_v3 specifically. Either make this return true 
for arch < 300 add the ARCH_300 check in the ioctl, or rename to include
v3.

> +
>  static struct kvmppc_ops kvm_ops_hv = {
>  	.get_sregs = kvm_arch_vcpu_ioctl_get_sregs_hv,
>  	.set_sregs = kvm_arch_vcpu_ioctl_set_sregs_hv,
> @@ -5642,6 +5651,7 @@ static struct kvmppc_ops kvm_ops_hv = {
>  	.store_to_eaddr = kvmhv_store_to_eaddr,
>  	.enable_svm = kvmhv_enable_svm,
>  	.svm_off = kvmhv_svm_off,
> +	.hash_possible = kvmppc_hash_possible,
>  };
>  

How about adding an op which can check extensions? It could return false
if it wasn't checked and so default to the generic checks in 
kvm_vm_ioctl_check_extension, and take a pointer to 'r' to set.

>  static int kvm_init_subcore_bitmap(void)
> diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
> index cf52d26f49cd7..99ced6c570e74 100644
> --- a/arch/powerpc/kvm/powerpc.c
> +++ b/arch/powerpc/kvm/powerpc.c
> @@ -611,8 +611,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>  		r = !!(hv_enabled && radix_enabled());
>  		break;
>  	case KVM_CAP_PPC_MMU_HASH_V3:
> -		r = !!(hv_enabled && cpu_has_feature(CPU_FTR_ARCH_300) &&
> -		       cpu_has_feature(CPU_FTR_HVMODE));
> +		r = !!(hv_enabled && kvmppc_hv_ops->hash_possible());
>  		break;
>  	case KVM_CAP_PPC_NESTED_HV:
>  		r = !!(hv_enabled && kvmppc_hv_ops->enable_nested &&

Thanks,
Nick

Re: [PATCH 1/4] KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support

[Fabiano Rosas]

Nicholas Piggin <npiggin@gmail.com> writes:

> Excerpts from Fabiano Rosas's message of January 20, 2021 7:07 am:
>> Nicholas Piggin <npiggin@gmail.com> writes:
>> 
>>> Excerpts from Fabiano Rosas's message of January 19, 2021 11:46 am:
>>>> Resending because the previous got spam-filtered:
>>>> 
>>>> Nicholas Piggin <npiggin@gmail.com> writes:
>>>> 
>>>>> This reverts much of commit c01015091a770 ("KVM: PPC: Book3S HV: Run HPT
>>>>> guests on POWER9 radix hosts"), which was required to run HPT guests on
>>>>> RPT hosts on early POWER9 CPUs without support for "mixed mode", which
>>>>> meant the host could not run with MMU on while guests were running.
>>>>>
>>>>> This code has some corner case bugs, e.g., when the guest hits a machine
>>>>> check or HMI the primary locks up waiting for secondaries to switch LPCR
>>>>> to host, which they never do. This could all be fixed in software, but
>>>>> most CPUs in production have mixed mode support, and those that don't
>>>>> are believed to be all in installations that don't use this capability.
>>>>> So simplify things and remove support.
>>>> 
>>>> With this patch in a DD2.1 machine + indep_threads_mode=N +
>>>> disable_radix, QEMU aborts and dumps registers, is that intended?
>>>
>>> Yes. That configuration is hanging handling MCEs in the guest with some 
>>> threads waiting forever to synchronize. Paul suggested it was never a
>>> supported configuration so we might just remove it.
>>>
>> 
>> OK, so:
>> 
>> Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
>> 
>>>> Could we use the 'no_mixing_hpt_and_radix' logic in check_extension to
>>>> advertise only KVM_CAP_PPC_MMU_RADIX to the guest via OV5 so it doesn't
>>>> try to run hash?
>>>> 
>>>> For instance, if I hack QEMU's 'spapr_dt_ov5_platform_support' from
>>>> OV5_MMU_BOTH to OV5_MMU_RADIX_300 then it boots succesfuly, but the
>>>> guest turns into radix, due to this code in prom_init:
>>>> 
>>>> prom_parse_mmu_model:
>>>> 
>>>> case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
>>>> 	prom_debug("MMU - radix only\n");
>>>> 	if (prom_radix_disable) {
>>>> 		/*
>>>> 		 * If we __have__ to do radix, we're better off ignoring
>>>> 		 * the command line rather than not booting.
>>>> 		 */
>>>> 		prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
>>>> 	}
>>>> 	support->radix_mmu = true;
>>>> 	break;
>>>> 
>>>> It seems we could explicitly say that the host does not support hash and
>>>> that would align with the above code.
>>>
>>> I'm not sure, sounds like you could, on the other hand these aborts seem 
>>> like the prefered failure mode for these kinds of configuration issues, 
>>> I don't know what the policy is, is reverting back to radix acceptable?
>>>
>> 
>> Yeah, I couldn't find documentation about why we're reverting back to
>> radix. I personally dislike it, but there is already a precedent so I'm
>> not sure. A radix guest on a hash host does the same transparent
>> conversion AFAICT.
>> 
>> But despite that, this patch removes support for hash MMU in this
>> particular scenario. I don't see why continuing to tell the guest we
>> support hash.
>> 
>> Anyway, here's a patch if you decide to go that way (tested w/ DD2.1 &
>> 2.3 machines):
>
> Thanks, I don't mind it, have to see if the maintainer will take it :)
>
> You could add a small changelog / SOB and I could putit after my patch?
>

Sure, I'll reply to this thread with a proper patch.

>> 
>> ---
>> diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
>> index 0a056c64c317b..53743555676d6 100644
>> --- a/arch/powerpc/include/asm/kvm_ppc.h
>> +++ b/arch/powerpc/include/asm/kvm_ppc.h
>> @@ -314,6 +314,7 @@ struct kvmppc_ops {
>>  			      int size);
>>  	int (*enable_svm)(struct kvm *kvm);
>>  	int (*svm_off)(struct kvm *kvm);
>> +	bool (*hash_possible)(void);
>>  };
>>  
>>  extern struct kvmppc_ops *kvmppc_hv_ops;
>> diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
>> index 6f612d240392f..2d1e8aba22b85 100644
>> --- a/arch/powerpc/kvm/book3s_hv.c
>> +++ b/arch/powerpc/kvm/book3s_hv.c
>> @@ -5599,6 +5599,15 @@ static int kvmhv_svm_off(struct kvm *kvm)
>>  	return ret;
>>  }
>>  
>> +static bool kvmppc_hash_possible(void)
>> +{
>> +	if (radix_enabled() && no_mixing_hpt_and_radix)
>> +		return false;
>> +
>> +	return cpu_has_feature(CPU_FTR_ARCH_300) &&
>> +		cpu_has_feature(CPU_FTR_HVMODE);
>> +}
>
> Just be careful, it's hash_v3 specifically. Either make this return true 
> for arch < 300 add the ARCH_300 check in the ioctl, or rename to include
> v3.
>
>> +
>>  static struct kvmppc_ops kvm_ops_hv = {
>>  	.get_sregs = kvm_arch_vcpu_ioctl_get_sregs_hv,
>>  	.set_sregs = kvm_arch_vcpu_ioctl_set_sregs_hv,
>> @@ -5642,6 +5651,7 @@ static struct kvmppc_ops kvm_ops_hv = {
>>  	.store_to_eaddr = kvmhv_store_to_eaddr,
>>  	.enable_svm = kvmhv_enable_svm,
>>  	.svm_off = kvmhv_svm_off,
>> +	.hash_possible = kvmppc_hash_possible,
>>  };
>>  
>
> How about adding an op which can check extensions? It could return false
> if it wasn't checked and so default to the generic checks in 
> kvm_vm_ioctl_check_extension, and take a pointer to 'r' to set.
>

I'm not sure I get the part about "return false if it wasn't
checked". Do you mean like this?

static bool kvmhv_check_extension(long ext, int *r)
{
	switch (ext) {
	case KVM_CAP_PPC_MMU_HASH_V3:
		r = kvmppc_hash_v3_possible();
		break;
	default:
		return false;
	}
	return true;
}

And then we could move all of the #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
cases into it and early in kvm_vm_ioctl_check_extension have something
like:

if (hv_enabled && kvmppc_hv_ops->check_extension(ext, &r))
	return r;

>>  static int kvm_init_subcore_bitmap(void)
>> diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
>> index cf52d26f49cd7..99ced6c570e74 100644
>> --- a/arch/powerpc/kvm/powerpc.c
>> +++ b/arch/powerpc/kvm/powerpc.c
>> @@ -611,8 +611,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>>  		r = !!(hv_enabled && radix_enabled());
>>  		break;
>>  	case KVM_CAP_PPC_MMU_HASH_V3:
>> -		r = !!(hv_enabled && cpu_has_feature(CPU_FTR_ARCH_300) &&
>> -		       cpu_has_feature(CPU_FTR_HVMODE));
>> +		r = !!(hv_enabled && kvmppc_hv_ops->hash_possible());
>>  		break;
>>  	case KVM_CAP_PPC_NESTED_HV:
>>  		r = !!(hv_enabled && kvmppc_hv_ops->enable_nested &&
>
> Thanks,
> Nick

[PATCH] KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2

[Fabiano Rosas]

These machines don't support running both MMU types at the same time,
so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is
using Radix MMU.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
---
 arch/powerpc/include/asm/kvm_ppc.h |  1 +
 arch/powerpc/kvm/book3s_hv.c       | 10 ++++++++++
 arch/powerpc/kvm/powerpc.c         |  3 +--
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 0a056c64c317..b36abc89baf3 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -314,6 +314,7 @@ struct kvmppc_ops {
 			      int size);
 	int (*enable_svm)(struct kvm *kvm);
 	int (*svm_off)(struct kvm *kvm);
+	bool (*hash_v3_possible)(void);
 };
 
 extern struct kvmppc_ops *kvmppc_hv_ops;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6f612d240392..d20c0682cae5 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5599,6 +5599,15 @@ static int kvmhv_svm_off(struct kvm *kvm)
 	return ret;
 }
 
+static bool kvmppc_hash_v3_possible(void)
+{
+	if (radix_enabled() && no_mixing_hpt_and_radix)
+		return false;
+
+	return cpu_has_feature(CPU_FTR_ARCH_300) &&
+		cpu_has_feature(CPU_FTR_HVMODE);
+}
+
 static struct kvmppc_ops kvm_ops_hv = {
 	.get_sregs = kvm_arch_vcpu_ioctl_get_sregs_hv,
 	.set_sregs = kvm_arch_vcpu_ioctl_set_sregs_hv,
@@ -5642,6 +5651,7 @@ static struct kvmppc_ops kvm_ops_hv = {
 	.store_to_eaddr = kvmhv_store_to_eaddr,
 	.enable_svm = kvmhv_enable_svm,
 	.svm_off = kvmhv_svm_off,
+	.hash_v3_possible = kvmppc_hash_v3_possible,
 };
 
 static int kvm_init_subcore_bitmap(void)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index cf52d26f49cd..b9fb2f20f879 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -611,8 +611,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = !!(hv_enabled && radix_enabled());
 		break;
 	case KVM_CAP_PPC_MMU_HASH_V3:
-		r = !!(hv_enabled && cpu_has_feature(CPU_FTR_ARCH_300) &&
-		       cpu_has_feature(CPU_FTR_HVMODE));
+		r = !!(hv_enabled && kvmppc_hv_ops->hash_v3_possible());
 		break;
 	case KVM_CAP_PPC_NESTED_HV:
 		r = !!(hv_enabled && kvmppc_hv_ops->enable_nested &&
-- 
2.29.2

[PATCH 2/4] KVM: PPC: Book3S HV: Fix radix guest SLB side channel

[Nicholas Piggin]

The slbmte instruction is legal in radix mode, including radix guest
mode. This means radix guests can load the SLB with arbitrary data.

KVM host does not clear the SLB when exiting a guest if it was a
radix guest, which would allow a rogue radix guest to use the SLB as
a side channel to communicate with other guests.

Fix this by ensuring the SLB is cleared when coming out of a radix
guest. Only the first 4 entries are a concern, because radix guests
always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia
is not used (except in a non-performance-critical path) because it
can clear cached translations.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 39 ++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index d5a9b57ec129..0e1f5bf168a1 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1157,6 +1157,20 @@ EXPORT_SYMBOL_GPL(__kvmhv_vcpu_entry_p9)
 	mr	r4, r3
 	b	fast_guest_entry_c
 guest_exit_short_path:
+	/*
+	 * Malicious or buggy radix guests may have inserted SLB entries
+	 * (only 0..3 because radix always runs with UPRT=1), so these must
+	 * be cleared here to avoid side-channels. slbmte is used rather
+	 * than slbia, as it won't clear cached translations.
+	 */
+	li	r0,0
+	slbmte	r0,r0
+	li	r4,1
+	slbmte	r0,r4
+	li	r4,2
+	slbmte	r0,r4
+	li	r4,3
+	slbmte	r0,r4
 
 	li	r0, KVM_GUEST_MODE_NONE
 	stb	r0, HSTATE_IN_GUEST(r13)
@@ -1469,7 +1483,7 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	lbz	r0, KVM_RADIX(r5)
 	li	r5, 0
 	cmpwi	r0, 0
-	bne	3f			/* for radix, save 0 entries */
+	bne	0f			/* for radix, save 0 entries */
 	lwz	r0,VCPU_SLB_NR(r9)	/* number of entries in SLB */
 	mtctr	r0
 	li	r6,0
@@ -1490,12 +1504,9 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	slbmte	r0,r0
 	slbia
 	ptesync
-3:	stw	r5,VCPU_SLB_MAX(r9)
+	stw	r5,VCPU_SLB_MAX(r9)
 
 	/* load host SLB entries */
-BEGIN_MMU_FTR_SECTION
-	b	0f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 	ld	r8,PACA_SLBSHADOWPTR(r13)
 
 	.rept	SLB_NUM_BOLTED
@@ -1508,7 +1519,17 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 	slbmte	r6,r5
 1:	addi	r8,r8,16
 	.endr
-0:
+	b	guest_bypass
+
+0:	/* Sanitise radix guest SLB, see guest_exit_short_path comment. */
+	li	r0,0
+	slbmte	r0,r0
+	li	r4,1
+	slbmte	r0,r4
+	li	r4,2
+	slbmte	r0,r4
+	li	r4,3
+	slbmte	r0,r4
 
 guest_bypass:
 	stw	r12, STACK_SLOT_TRAP(r1)
@@ -3302,12 +3323,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 	mtspr	SPRN_CIABR, r0
 	mtspr	SPRN_DAWRX0, r0
 
+	/* Clear hash and radix guest SLB, see guest_exit_short_path comment. */
+	slbmte	r0, r0
+	slbia
+
 BEGIN_MMU_FTR_SECTION
 	b	4f
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 
-	slbmte	r0, r0
-	slbia
 	ptesync
 	ld	r8, PACA_SLBSHADOWPTR(r13)
 	.rept	SLB_NUM_BOLTED
-- 
2.23.0

Re: [PATCH 2/4] KVM: PPC: Book3S HV: Fix radix guest SLB side channel

[Fabiano Rosas]

Nicholas Piggin <npiggin@gmail.com> writes:

> The slbmte instruction is legal in radix mode, including radix guest
> mode. This means radix guests can load the SLB with arbitrary data.
>
> KVM host does not clear the SLB when exiting a guest if it was a
> radix guest, which would allow a rogue radix guest to use the SLB as
> a side channel to communicate with other guests.
>
> Fix this by ensuring the SLB is cleared when coming out of a radix
> guest. Only the first 4 entries are a concern, because radix guests
> always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia
> is not used (except in a non-performance-critical path) because it
> can clear cached translations.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>

> ---
>  arch/powerpc/kvm/book3s_hv_rmhandlers.S | 39 ++++++++++++++++++++-----
>  1 file changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index d5a9b57ec129..0e1f5bf168a1 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -1157,6 +1157,20 @@ EXPORT_SYMBOL_GPL(__kvmhv_vcpu_entry_p9)
>  	mr	r4, r3
>  	b	fast_guest_entry_c
>  guest_exit_short_path:
> +	/*
> +	 * Malicious or buggy radix guests may have inserted SLB entries
> +	 * (only 0..3 because radix always runs with UPRT=1), so these must
> +	 * be cleared here to avoid side-channels. slbmte is used rather
> +	 * than slbia, as it won't clear cached translations.
> +	 */
> +	li	r0,0
> +	slbmte	r0,r0
> +	li	r4,1
> +	slbmte	r0,r4
> +	li	r4,2
> +	slbmte	r0,r4
> +	li	r4,3
> +	slbmte	r0,r4
>
>  	li	r0, KVM_GUEST_MODE_NONE
>  	stb	r0, HSTATE_IN_GUEST(r13)
> @@ -1469,7 +1483,7 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
>  	lbz	r0, KVM_RADIX(r5)
>  	li	r5, 0
>  	cmpwi	r0, 0
> -	bne	3f			/* for radix, save 0 entries */
> +	bne	0f			/* for radix, save 0 entries */
>  	lwz	r0,VCPU_SLB_NR(r9)	/* number of entries in SLB */
>  	mtctr	r0
>  	li	r6,0
> @@ -1490,12 +1504,9 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
>  	slbmte	r0,r0
>  	slbia
>  	ptesync
> -3:	stw	r5,VCPU_SLB_MAX(r9)
> +	stw	r5,VCPU_SLB_MAX(r9)
>
>  	/* load host SLB entries */
> -BEGIN_MMU_FTR_SECTION
> -	b	0f
> -END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
>  	ld	r8,PACA_SLBSHADOWPTR(r13)
>
>  	.rept	SLB_NUM_BOLTED
> @@ -1508,7 +1519,17 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
>  	slbmte	r6,r5
>  1:	addi	r8,r8,16
>  	.endr
> -0:
> +	b	guest_bypass
> +
> +0:	/* Sanitise radix guest SLB, see guest_exit_short_path comment. */
> +	li	r0,0
> +	slbmte	r0,r0
> +	li	r4,1
> +	slbmte	r0,r4
> +	li	r4,2
> +	slbmte	r0,r4
> +	li	r4,3
> +	slbmte	r0,r4
>
>  guest_bypass:
>  	stw	r12, STACK_SLOT_TRAP(r1)
> @@ -3302,12 +3323,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
>  	mtspr	SPRN_CIABR, r0
>  	mtspr	SPRN_DAWRX0, r0
>
> +	/* Clear hash and radix guest SLB, see guest_exit_short_path comment. */
> +	slbmte	r0, r0
> +	slbia
> +
>  BEGIN_MMU_FTR_SECTION
>  	b	4f
>  END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
>
> -	slbmte	r0, r0
> -	slbia
>  	ptesync
>  	ld	r8, PACA_SLBSHADOWPTR(r13)
>  	.rept	SLB_NUM_BOLTED

Re: [PATCH 2/4] KVM: PPC: Book3S HV: Fix radix guest SLB side channel

[Paul Mackerras]

On Mon, Jan 18, 2021 at 04:28:07PM +1000, Nicholas Piggin wrote:
> The slbmte instruction is legal in radix mode, including radix guest
> mode. This means radix guests can load the SLB with arbitrary data.
> 
> KVM host does not clear the SLB when exiting a guest if it was a
> radix guest, which would allow a rogue radix guest to use the SLB as
> a side channel to communicate with other guests.

No, because the code currently clears the SLB when entering a radix
guest, which you remove in the next patch.  I'm OK with moving the SLB
clearing from guest entry to guest exit, I guess, but I don't see that
you are in fact fixing anything by doing so.

Paul.

Re: [PATCH 2/4] KVM: PPC: Book3S HV: Fix radix guest SLB side channel

[Nicholas Piggin]

Excerpts from Paul Mackerras's message of February 10, 2021 11:28 am:
> On Mon, Jan 18, 2021 at 04:28:07PM +1000, Nicholas Piggin wrote:
>> The slbmte instruction is legal in radix mode, including radix guest
>> mode. This means radix guests can load the SLB with arbitrary data.
>> 
>> KVM host does not clear the SLB when exiting a guest if it was a
>> radix guest, which would allow a rogue radix guest to use the SLB as
>> a side channel to communicate with other guests.
> 
> No, because the code currently clears the SLB when entering a radix
> guest,

Not AFAIKS.

> which you remove in the next patch.

The next patch avoids clearing host SLB entries when a hash guest is 
entered from a radix host, it doesn't apply to radix guests. Not sure
where the changelog for it went but it should have "HPT guests" in the
title at least, I guess.

> I'm OK with moving the SLB
> clearing from guest entry to guest exit, I guess, but I don't see that
> you are in fact fixing anything by doing so.

I can set slb entries in a radix guest in simulator and observe they 
stay around over host<->guest transitions, and they don't after this
patch.

Thanks,
Nick

[PATCH 3/4] KVM: PPC: Book3S HV: No need to clear radix host SLB before loading guest

[Nicholas Piggin]

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 0e1f5bf168a1..9f0fdbae4b44 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -888,15 +888,19 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_300)
 	cmpdi	r3, 512		/* 1 microsecond */
 	blt	hdec_soon
 
-	/* For hash guest, clear out and reload the SLB */
 	ld	r6, VCPU_KVM(r4)
 	lbz	r0, KVM_RADIX(r6)
 	cmpwi	r0, 0
 	bne	9f
+
+	/* For hash guest, clear out and reload the SLB */
+BEGIN_MMU_FTR_SECTION
+	/* Radix host won't have populated the SLB, so no need to clear */
 	li	r6, 0
 	slbmte	r6, r6
 	slbia
 	ptesync
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
 
 	/* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */
 	lwz	r5,VCPU_SLB_MAX(r4)
-- 
2.23.0

[PATCH 4/4] KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB

[Nicholas Piggin]

IH=6 may preserve hypervisor real-mode ERAT entries and is the
recommended SLBIA hint for switching partitions.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 9f0fdbae4b44..8cf1f69f442e 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -898,7 +898,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Radix host won't have populated the SLB, so no need to clear */
 	li	r6, 0
 	slbmte	r6, r6
-	slbia
+	PPC_SLBIA(6)
 	ptesync
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
 
@@ -1506,7 +1506,7 @@ guest_exit_cont:		/* r9 = vcpu, r12 = trap, r13 = paca */
 	/* Finally clear out the SLB */
 	li	r0,0
 	slbmte	r0,r0
-	slbia
+	PPC_SLBIA(6)
 	ptesync
 	stw	r5,VCPU_SLB_MAX(r9)
 
@@ -3329,7 +3329,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 
 	/* Clear hash and radix guest SLB, see guest_exit_short_path comment. */
 	slbmte	r0, r0
-	slbia
+	PPC_SLBIA(6)
 
 BEGIN_MMU_FTR_SECTION
 	b	4f
-- 
2.23.0