linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>,
	Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v7 30/42] powerpc/64: context tracking remove _TIF_NOHZ
Date: Sat, 30 Jan 2021 23:08:40 +1000	[thread overview]
Message-ID: <20210130130852.2952424-31-npiggin@gmail.com> (raw)
In-Reply-To: <20210130130852.2952424-1-npiggin@gmail.com>

Add context tracking to the system call handler explicitly, and remove
_TIF_NOHZ.

This improves system call performance when nohz_full is enabled. On a
POWER9, gettid scv system call cost on a nohz_full CPU improves from
1129 cycles to 1004 cycles and on a housekeeping CPU from 550 cycles
to 430 cycles.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/Kconfig                   |  1 -
 arch/powerpc/include/asm/thread_info.h |  4 +-
 arch/powerpc/kernel/ptrace/ptrace.c    |  4 --
 arch/powerpc/kernel/signal.c           |  4 --
 arch/powerpc/kernel/syscall_64.c       | 72 ++++++++++++++++----------
 5 files changed, 47 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 107bb4319e0e..28d5a1b1510f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -196,7 +196,6 @@ config PPC
 	select HAVE_STACKPROTECTOR		if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_CONTEXT_TRACKING		if PPC64
-	select HAVE_TIF_NOHZ			if PPC64
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DYNAMIC_FTRACE
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 3d8a47af7a25..386d576673a1 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -94,7 +94,6 @@ void arch_setup_new_exec(void);
 #define TIF_PATCH_PENDING	6	/* pending live patching update */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_NOHZ		9	/* in adaptive nohz mode */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
@@ -128,11 +127,10 @@ void arch_setup_new_exec(void);
 #define _TIF_UPROBE		(1<<TIF_UPROBE)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_EMULATE_STACK_STORE	(1<<TIF_EMULATE_STACK_STORE)
-#define _TIF_NOHZ		(1<<TIF_NOHZ)
 #define _TIF_SYSCALL_EMU	(1<<TIF_SYSCALL_EMU)
 #define _TIF_SYSCALL_DOTRACE	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT | \
-				 _TIF_NOHZ | _TIF_SYSCALL_EMU)
+				 _TIF_SYSCALL_EMU)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
 				 _TIF_NOTIFY_RESUME | _TIF_UPROBE | \
diff --git a/arch/powerpc/kernel/ptrace/ptrace.c b/arch/powerpc/kernel/ptrace/ptrace.c
index 3d44b73adb83..4f3d4ff3728c 100644
--- a/arch/powerpc/kernel/ptrace/ptrace.c
+++ b/arch/powerpc/kernel/ptrace/ptrace.c
@@ -262,8 +262,6 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	u32 flags;
 
-	user_exit();
-
 	flags = READ_ONCE(current_thread_info()->flags) &
 		(_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE);
 
@@ -340,8 +338,6 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, step);
-
-	user_enter();
 }
 
 void __init pt_regs_check(void);
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 53782aa60ade..9ded046edb0e 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -282,8 +282,6 @@ static void do_signal(struct task_struct *tsk)
 
 void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	user_exit();
-
 	if (thread_info_flags & _TIF_UPROBE)
 		uprobe_notify_resume(regs);
 
@@ -299,8 +297,6 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 		tracehook_notify_resume(regs);
 		rseq_handle_notify_resume(NULL, regs);
 	}
-
-	user_enter();
 }
 
 static unsigned long get_tm_stackpointer(struct task_struct *tsk)
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index 316c3ba16554..45c4420fe339 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -1,9 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <linux/context_tracking.h>
 #include <linux/err.h>
 #include <asm/asm-prototypes.h>
 #include <asm/kup.h>
 #include <asm/cputime.h>
+#include <asm/interrupt.h>
 #include <asm/hw_irq.h>
 #include <asm/interrupt.h>
 #include <asm/kprobes.h>
@@ -28,6 +30,9 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
 		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
 
+	CT_WARN_ON(ct_state() == CONTEXT_KERNEL);
+	user_exit_irqoff();
+
 	trace_hardirqs_off(); /* finish reconciling */
 
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
@@ -144,7 +149,7 @@ notrace long system_call_exception(long r3, long r4, long r5,
  * enabled when the interrupt handler returns (indicating a process-context /
  * synchronous interrupt) then irqs_enabled should be true.
  */
-static notrace inline bool prep_irq_for_enabled_exit(bool clear_ri, bool irqs_enabled)
+static notrace inline bool __prep_irq_for_enabled_exit(bool clear_ri)
 {
 	/* This must be done with RI=1 because tracing may touch vmaps */
 	trace_hardirqs_on();
@@ -161,29 +166,6 @@ static notrace inline bool prep_irq_for_enabled_exit(bool clear_ri, bool irqs_en
 		trace_hardirqs_off();
 		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 
-		/*
-		 * Must replay pending soft-masked interrupts now. Don't just
-		 * local_irq_enabe(); local_irq_disable(); because if we are
-		 * returning from an asynchronous interrupt here, another one
-		 * might hit after irqs are enabled, and it would exit via this
-		 * same path allowing another to fire, and so on unbounded.
-		 *
-		 * If interrupts were enabled when this interrupt exited,
-		 * indicating a process context (synchronous) interrupt,
-		 * local_irq_enable/disable can be used, which will enable
-		 * interrupts rather than keeping them masked (unclear how
-		 * much benefit this is over just replaying for all cases,
-		 * because we immediately disable again, so all we're really
-		 * doing is allowing hard interrupts to execute directly for
-		 * a very small time, rather than being masked and replayed).
-		 */
-		if (irqs_enabled) {
-			local_irq_enable();
-			local_irq_disable();
-		} else {
-			replay_soft_interrupts();
-		}
-
 		return false;
 	}
 	local_paca->irq_happened = 0;
@@ -192,6 +174,37 @@ static notrace inline bool prep_irq_for_enabled_exit(bool clear_ri, bool irqs_en
 	return true;
 }
 
+static notrace inline bool prep_irq_for_enabled_exit(bool clear_ri, bool irqs_enabled)
+{
+	if (__prep_irq_for_enabled_exit(clear_ri))
+		return true;
+
+	/*
+	 * Must replay pending soft-masked interrupts now. Don't just
+	 * local_irq_enabe(); local_irq_disable(); because if we are
+	 * returning from an asynchronous interrupt here, another one
+	 * might hit after irqs are enabled, and it would exit via this
+	 * same path allowing another to fire, and so on unbounded.
+	 *
+	 * If interrupts were enabled when this interrupt exited,
+	 * indicating a process context (synchronous) interrupt,
+	 * local_irq_enable/disable can be used, which will enable
+	 * interrupts rather than keeping them masked (unclear how
+	 * much benefit this is over just replaying for all cases,
+	 * because we immediately disable again, so all we're really
+	 * doing is allowing hard interrupts to execute directly for
+	 * a very small time, rather than being masked and replayed).
+	 */
+	if (irqs_enabled) {
+		local_irq_enable();
+		local_irq_disable();
+	} else {
+		replay_soft_interrupts();
+	}
+
+	return false;
+}
+
 /*
  * This should be called after a syscall returns, with r3 the return value
  * from the syscall. If this function returns non-zero, the system call
@@ -209,6 +222,8 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 	unsigned long ti_flags;
 	unsigned long ret = 0;
 
+	CT_WARN_ON(ct_state() == CONTEXT_USER);
+
 	kuap_check_amr();
 
 	regs->result = r3;
@@ -240,9 +255,9 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 		ret |= _TIF_RESTOREALL;
 	}
 
+again:
 	local_irq_disable();
 
-again:
 	ti_flags = READ_ONCE(*ti_flagsp);
 	while (unlikely(ti_flags & (_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM))) {
 		local_irq_enable();
@@ -286,9 +301,14 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
 		}
 	}
 
+	user_enter_irqoff();
+
 	/* scv need not set RI=0 because SRRs are not used */
-	if (unlikely(!prep_irq_for_enabled_exit(!scv, true)))
+	if (unlikely(!__prep_irq_for_enabled_exit(!scv))) {
+		user_exit_irqoff();
+		local_irq_enable();
 		goto again;
+	}
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 	local_paca->tm_scratch = regs->msr;
-- 
2.23.0


  parent reply	other threads:[~2021-01-30 14:29 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-30 13:08 [PATCH v7 00/42] powerpc: interrupt wrappers Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 01/42] powerpc/64s: interrupt exit improve bounding of interrupt recursion Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 02/42] KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 03/42] powerpc/32s: move DABR match out of handle_page_fault Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 04/42] powerpc/64s: " Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 05/42] powerpc/64s: move the hash fault handling logic to C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 06/42] powerpc: remove arguments from fault handler functions Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 07/42] powerpc/fsl_booke/32: CacheLockingException remove args Nicholas Piggin
2021-02-08 10:04   ` Gautham R Shenoy
2021-02-08 11:54     ` Michael Ellerman
2021-01-30 13:08 ` [PATCH v7 08/42] powerpc: do_break get registers from regs Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 09/42] powerpc: DebugException remove args Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 10/42] powerpc/32: transfer can avoid saving r4/r5 over trace call Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 11/42] powerpc: bad_page_fault get registers from regs Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 12/42] powerpc/64s: add do_bad_page_fault_segv handler Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 13/42] powerpc: rearrange do_page_fault error case to be inside exception_enter Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 14/42] powerpc/64s: move bad_page_fault handling to C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 15/42] powerpc/64s: split do_hash_fault Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 16/42] powerpc/mm: Remove stale do_page_fault comment referring to SLB faults Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 17/42] powerpc/64s: slb comment update Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 18/42] powerpc/traps: add NOKPROBE_SYMBOL for sreset and mce Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 19/42] powerpc/perf: move perf irq/nmi handling details into traps.c Nicholas Piggin
2021-01-31 12:30   ` Athira Rajeev
2021-01-30 13:08 ` [PATCH v7 20/42] powerpc/time: move timer_broadcast_interrupt prototype to asm/time.h Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 21/42] powerpc: add and use unknown_async_exception Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 22/42] powerpc/cell: tidy up pervasive declarations Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 23/42] powerpc: introduce die_mce Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 24/42] powerpc/mce: ensure machine check handler always tests RI Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 25/42] powerpc: improve handling of unrecoverable system reset Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 26/42] powerpc: interrupt handler wrapper functions Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 27/42] powerpc: add interrupt wrapper entry / exit stub functions Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 28/42] powerpc: convert interrupt handlers to use wrappers Nicholas Piggin
2021-02-03  1:54   ` Nicholas Piggin
2021-02-05  8:09   ` Christophe Leroy
2021-02-06  2:43     ` Nicholas Piggin
2021-02-07 12:56     ` Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 29/42] powerpc: add interrupt_cond_local_irq_enable helper Nicholas Piggin
2021-01-30 13:08 ` Nicholas Piggin [this message]
2021-01-30 13:08 ` [PATCH v7 31/42] powerpc/64s/hash: improve context tracking of hash faults Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 32/42] powerpc/64: context tracking move to interrupt wrappers Nicholas Piggin
2021-02-09  5:49   ` Christophe Leroy
2021-02-09  7:45     ` Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 33/42] powerpc/64: add context tracking to asynchronous interrupts Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 34/42] powerpc: handle irq_enter/irq_exit in interrupt handler wrappers Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 35/42] powerpc/64s: move context tracking exit to interrupt exit path Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 36/42] powerpc/64s: reconcile interrupts in C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 37/42] powerpc/64: move account_stolen_time into its own function Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 38/42] powerpc/64: entry cpu time accounting in C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 39/42] powerpc: move NMI entry/exit code into wrapper Nicholas Piggin
2021-02-04 10:15   ` Michael Ellerman
2021-02-04 11:31     ` Nicholas Piggin
2021-02-05 23:38       ` Michael Ellerman
2021-02-06  2:46         ` Nicholas Piggin
2021-02-07 12:54           ` Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 40/42] powerpc/64s: move NMI soft-mask handling to C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 41/42] powerpc/64s: runlatch interrupt handling in C Nicholas Piggin
2021-01-30 13:08 ` [PATCH v7 42/42] powerpc/64s: power4 nap fixup " Nicholas Piggin
2021-02-02 10:31   ` Michael Ellerman
2021-02-03  0:35     ` Nicholas Piggin
2021-02-07 12:58     ` Nicholas Piggin
2021-02-02  5:57 ` [PATCH v7 00/42] powerpc: interrupt wrappers Christophe Leroy
2021-02-10 12:57 ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210130130852.2952424-31-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=atrajeev@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).