From: Nicholas Piggin <npiggin@gmail.com>
To: kvm-ppc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org, Nicholas Piggin <npiggin@gmail.com>
Subject: [RFC PATCH 2/9] KVM: PPC: Book3S 64: Move GUEST_MODE_SKIP test into KVM
Date: Tue, 2 Feb 2021 13:03:06 +1000 [thread overview]
Message-ID: <20210202030313.3509446-3-npiggin@gmail.com> (raw)
In-Reply-To: <20210202030313.3509446-1-npiggin@gmail.com>
Move the GUEST_MODE_SKIP logic into KVM code. This is quite a KVM
internal detail that has no real need to be in common handlers.
(XXX: Need to confirm CBE handlers etc)
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 64 ----------------------------
arch/powerpc/kvm/book3s_64_entry.S | 50 ++++++++++++++++++----
2 files changed, 42 insertions(+), 72 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 65659ea3cec4..e6f7fc7c61a1 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -133,7 +133,6 @@ name:
#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */
-#define IKVM_SKIP .L_IKVM_SKIP_\name\() /* Generate KVM skip handler */
#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */
#define __IKVM_REAL(name) .L_IKVM_REAL_ ## name
#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */
@@ -191,9 +190,6 @@ do_define_int n
.ifndef IMASK
IMASK=0
.endif
- .ifndef IKVM_SKIP
- IKVM_SKIP=0
- .endif
.ifndef IKVM_REAL
IKVM_REAL=0
.endif
@@ -254,15 +250,10 @@ do_define_int n
.balign IFETCH_ALIGN_BYTES
\name\()_kvm:
- .if IKVM_SKIP
- cmpwi r10,KVM_GUEST_MODE_SKIP
- beq 89f
- .else
BEGIN_FTR_SECTION
ld r10,IAREA+EX_CFAR(r13)
std r10,HSTATE_CFAR(r13)
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
- .endif
ld r10,IAREA+EX_CTR(r13)
mtctr r10
@@ -289,27 +280,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ori r12,r12,(IVEC)
.endif
b kvmppc_interrupt
-
- .if IKVM_SKIP
-89: mtocrf 0x80,r9
- ld r10,IAREA+EX_CTR(r13)
- mtctr r10
- ld r9,IAREA+EX_R9(r13)
- ld r10,IAREA+EX_R10(r13)
- ld r11,IAREA+EX_R11(r13)
- ld r12,IAREA+EX_R12(r13)
- .if IHSRR_IF_HVMODE
- BEGIN_FTR_SECTION
- b kvmppc_skip_Hinterrupt
- FTR_SECTION_ELSE
- b kvmppc_skip_interrupt
- ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
- .elseif IHSRR
- b kvmppc_skip_Hinterrupt
- .else
- b kvmppc_skip_interrupt
- .endif
- .endif
.endm
#else
@@ -1128,7 +1098,6 @@ INT_DEFINE_BEGIN(machine_check)
ISET_RI=0
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(machine_check)
@@ -1419,7 +1388,6 @@ INT_DEFINE_BEGIN(data_access)
IVEC=0x300
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(data_access)
@@ -1469,7 +1437,6 @@ INT_DEFINE_BEGIN(data_access_slb)
IAREA=PACA_EXSLB
IRECONCILE=0
IDAR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(data_access_slb)
@@ -2116,7 +2083,6 @@ INT_DEFINE_BEGIN(h_data_storage)
IHSRR=1
IDAR=1
IDSISR=1
- IKVM_SKIP=1
IKVM_REAL=1
IKVM_VIRT=1
INT_DEFINE_END(h_data_storage)
@@ -2573,7 +2539,6 @@ EXC_VIRT_NONE(0x5100, 0x100)
INT_DEFINE_BEGIN(cbe_system_error)
IVEC=0x1200
IHSRR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(cbe_system_error)
@@ -2598,7 +2563,6 @@ EXC_VIRT_NONE(0x5200, 0x100)
INT_DEFINE_BEGIN(instruction_breakpoint)
IVEC=0x1300
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
- IKVM_SKIP=1
IKVM_REAL=1
#endif
INT_DEFINE_END(instruction_breakpoint)
@@ -2744,7 +2708,6 @@ EXC_COMMON_BEGIN(denorm_exception_common)
INT_DEFINE_BEGIN(cbe_maintenance)
IVEC=0x1600
IHSRR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(cbe_maintenance)
@@ -2797,7 +2760,6 @@ EXC_COMMON_BEGIN(altivec_assist_common)
INT_DEFINE_BEGIN(cbe_thermal)
IVEC=0x1800
IHSRR=1
- IKVM_SKIP=1
IKVM_REAL=1
INT_DEFINE_END(cbe_thermal)
@@ -3081,32 +3043,6 @@ EXPORT_SYMBOL(do_uaccess_flush)
MASKED_INTERRUPT
MASKED_INTERRUPT hsrr=1
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-kvmppc_skip_interrupt:
- /*
- * Here all GPRs are unchanged from when the interrupt happened
- * except for r13, which is saved in SPRG_SCRATCH0.
- */
- mfspr r13, SPRN_SRR0
- addi r13, r13, 4
- mtspr SPRN_SRR0, r13
- GET_SCRATCH0(r13)
- RFI_TO_KERNEL
- b .
-
-kvmppc_skip_Hinterrupt:
- /*
- * Here all GPRs are unchanged from when the interrupt happened
- * except for r13, which is saved in SPRG_SCRATCH0.
- */
- mfspr r13, SPRN_HSRR0
- addi r13, r13, 4
- mtspr SPRN_HSRR0, r13
- GET_SCRATCH0(r13)
- HRFI_TO_KERNEL
- b .
-#endif
-
/*
* Relocation-on interrupts: A subset of the interrupts can be delivered
* with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
diff --git a/arch/powerpc/kvm/book3s_64_entry.S b/arch/powerpc/kvm/book3s_64_entry.S
index 22e34b95f478..8e7216f3c3ee 100644
--- a/arch/powerpc/kvm/book3s_64_entry.S
+++ b/arch/powerpc/kvm/book3s_64_entry.S
@@ -1,9 +1,10 @@
+#include <asm/asm-offsets.h>
#include <asm/cache.h>
-#include <asm/ppc_asm.h>
+#include <asm/exception-64s.h>
#include <asm/kvm_asm.h>
-#include <asm/reg.h>
-#include <asm/asm-offsets.h>
#include <asm/kvm_book3s_asm.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
/*
* We come here from the first-level interrupt handlers.
@@ -18,17 +19,50 @@ kvmppc_interrupt:
* guest R12 saved in shadow VCPU SCRATCH0
* guest R13 saved in SPRN_SCRATCH0
*/
+ std r9,HSTATE_SCRATCH2(r13)
+ lbz r9,HSTATE_IN_GUEST(r13)
+ cmpwi r9,KVM_GUEST_MODE_SKIP
+ beq maybe_skip
+no_skip:
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
- std r9, HSTATE_SCRATCH2(r13)
- lbz r9, HSTATE_IN_GUEST(r13)
- cmpwi r9, KVM_GUEST_MODE_HOST_HV
+ cmpwi r9,KVM_GUEST_MODE_HOST_HV
beq kvmppc_bad_host_intr
#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
- cmpwi r9, KVM_GUEST_MODE_GUEST
- ld r9, HSTATE_SCRATCH2(r13)
+ cmpwi r9,KVM_GUEST_MODE_GUEST
+ ld r9,HSTATE_SCRATCH2(r13)
beq kvmppc_interrupt_pr
#endif
b kvmppc_interrupt_hv
#else
b kvmppc_interrupt_pr
#endif
+
+maybe_skip:
+ cmpwi r12,0x200
+ beq 1f
+ cmpwi r12,0x300
+ beq 1f
+ cmpwi r12,0x380
+ beq 1f
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ /* XXX: cbe stuff? instruction breakpoint? */
+ cmpwi r12,0xe02
+ beq 2f
+#endif
+ b no_skip
+1: mfspr r9,SPRN_SRR0
+ addi r9,r9,4
+ mtspr SPRN_SRR0,r9
+ ld r12,HSTATE_SCRATCH0(r13)
+ ld r9,HSTATE_SCRATCH2(r13)
+ GET_SCRATCH0(r13)
+ RFI_TO_KERNEL
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+2: mfspr r9,SPRN_HSRR0
+ addi r9,r9,4
+ mtspr SPRN_HSRR0,r9
+ ld r12,HSTATE_SCRATCH0(r13)
+ ld r9,HSTATE_SCRATCH2(r13)
+ GET_SCRATCH0(r13)
+ HRFI_TO_KERNEL
+#endif
--
2.23.0
next prev parent reply other threads:[~2021-02-02 3:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 3:03 [RFC PATCH 0/9] KVM: PPC: Book3S: C-ify the P9 entry/exit code Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 1/9] KVM: PPC: Book3S 64: move KVM interrupt entry to a common entry point Nicholas Piggin
2021-02-05 21:28 ` Fabiano Rosas
2021-02-19 5:18 ` Daniel Axtens
2021-02-19 8:03 ` Nicholas Piggin
2021-02-02 3:03 ` Nicholas Piggin [this message]
2021-02-12 20:33 ` [RFC PATCH 2/9] KVM: PPC: Book3S 64: Move GUEST_MODE_SKIP test into KVM Fabiano Rosas
2021-02-19 7:53 ` Nicholas Piggin
2021-02-19 6:03 ` Daniel Axtens
2021-02-19 7:56 ` Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 3/9] KVM: PPC: Book3S 64: add hcall interrupt handler Nicholas Piggin
2021-02-12 20:33 ` Fabiano Rosas
2021-02-02 3:03 ` [RFC PATCH 4/9] KVM: PPC: Book3S HV: Move hcall early register setup to KVM Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 5/9] powerpc/64s: Remove EXSLB interrupt save area Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 6/9] KVM: PPC: Book3S HV: Move interrupt early register setup to KVM Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 7/9] KVM: PPC: Book3S HV: move bad_host_intr check to HV handler Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 8/9] KVM: PPC: Book3S HV: Minimise hcall handler calling convention differences Nicholas Piggin
2021-02-02 3:03 ` [RFC PATCH 9/9] KVM: PPC: Book3S HV: Implement the rest of the P9 entry/exit handling in C Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202030313.3509446-3-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).