linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Christopher M. Riedl" <cmr@codefail.de>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v5 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext()
Date: Wed,  3 Feb 2021 12:43:19 -0600	[thread overview]
Message-ID: <20210203184323.20792-7-cmr@codefail.de> (raw)
In-Reply-To: <20210203184323.20792-1-cmr@codefail.de>

Previously setup_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.

Rewrite setup_sigcontext() to assume that a userspace write access window
is open. Replace all uaccess functions with their 'unsafe' versions
which avoid the repeated uaccess switches.

Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
---
 arch/powerpc/kernel/signal_64.c | 70 ++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 8e1d804ce552..4248e4489ff1 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -101,9 +101,13 @@ static void prepare_setup_sigcontext(struct task_struct *tsk, int ctx_has_vsx_re
  * Set up the sigcontext for the signal frame.
  */
 
-static long setup_sigcontext(struct sigcontext __user *sc,
-		struct task_struct *tsk, int signr, sigset_t *set,
-		unsigned long handler, int ctx_has_vsx_region)
+#define unsafe_setup_sigcontext(sc, tsk, signr, set, handler,		\
+				ctx_has_vsx_region, e)			\
+	unsafe_op_wrap(__unsafe_setup_sigcontext(sc, tsk, signr, set,	\
+			handler, ctx_has_vsx_region), e)
+static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc,
+					struct task_struct *tsk, int signr, sigset_t *set,
+					unsigned long handler, int ctx_has_vsx_region)
 {
 	/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
 	 * process never used altivec yet (MSR_VEC is zero in pt_regs of
@@ -118,20 +122,19 @@ static long setup_sigcontext(struct sigcontext __user *sc,
 #endif
 	struct pt_regs *regs = tsk->thread.regs;
 	unsigned long msr = regs->msr;
-	long err = 0;
 	/* Force usr to alway see softe as 1 (interrupts enabled) */
 	unsigned long softe = 0x1;
 
 	BUG_ON(tsk != current);
 
 #ifdef CONFIG_ALTIVEC
-	err |= __put_user(v_regs, &sc->v_regs);
+	unsafe_put_user(v_regs, &sc->v_regs, efault_out);
 
 	/* save altivec registers */
 	if (tsk->thread.used_vr) {
 		/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
-		err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
-				      33 * sizeof(vector128));
+		unsafe_copy_to_user(v_regs, &tsk->thread.vr_state,
+				    33 * sizeof(vector128), efault_out);
 		/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
 		 * contains valid data.
 		 */
@@ -140,12 +143,12 @@ static long setup_sigcontext(struct sigcontext __user *sc,
 	/* We always copy to/from vrsave, it's 0 if we don't have or don't
 	 * use altivec.
 	 */
-	err |= __put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
+	unsafe_put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33], efault_out);
 #else /* CONFIG_ALTIVEC */
-	err |= __put_user(0, &sc->v_regs);
+	unsafe_put_user(0, &sc->v_regs, efault_out);
 #endif /* CONFIG_ALTIVEC */
 	/* copy fpr regs and fpscr */
-	err |= copy_fpr_to_user(&sc->fp_regs, tsk);
+	unsafe_copy_fpr_to_user(&sc->fp_regs, tsk, efault_out);
 
 	/*
 	 * Clear the MSR VSX bit to indicate there is no valid state attached
@@ -160,24 +163,27 @@ static long setup_sigcontext(struct sigcontext __user *sc,
 	 */
 	if (tsk->thread.used_vsr && ctx_has_vsx_region) {
 		v_regs += ELF_NVRREG;
-		err |= copy_vsx_to_user(v_regs, tsk);
+		unsafe_copy_vsx_to_user(v_regs, tsk, efault_out);
 		/* set MSR_VSX in the MSR value in the frame to
 		 * indicate that sc->vs_reg) contains valid data.
 		 */
 		msr |= MSR_VSX;
 	}
 #endif /* CONFIG_VSX */
-	err |= __put_user(&sc->gp_regs, &sc->regs);
+	unsafe_put_user(&sc->gp_regs, &sc->regs, efault_out);
 	WARN_ON(!FULL_REGS(regs));
-	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
-	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
-	err |= __put_user(softe, &sc->gp_regs[PT_SOFTE]);
-	err |= __put_user(signr, &sc->signal);
-	err |= __put_user(handler, &sc->handler);
+	unsafe_copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE, efault_out);
+	unsafe_put_user(msr, &sc->gp_regs[PT_MSR], efault_out);
+	unsafe_put_user(softe, &sc->gp_regs[PT_SOFTE], efault_out);
+	unsafe_put_user(signr, &sc->signal, efault_out);
+	unsafe_put_user(handler, &sc->handler, efault_out);
 	if (set != NULL)
-		err |=  __put_user(set->sig[0], &sc->oldmask);
+		unsafe_put_user(set->sig[0], &sc->oldmask, efault_out);
 
-	return err;
+	return 0;
+
+efault_out:
+	return -EFAULT;
 }
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -664,12 +670,15 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
 
 	if (old_ctx != NULL) {
 		prepare_setup_sigcontext(current, ctx_has_vsx_region);
-		if (!access_ok(old_ctx, ctx_size)
-		    || setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL, 0,
-					ctx_has_vsx_region)
-		    || __copy_to_user(&old_ctx->uc_sigmask,
-				      &current->blocked, sizeof(sigset_t)))
+		if (!user_write_access_begin(old_ctx, ctx_size))
 			return -EFAULT;
+
+		unsafe_setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL,
+					0, ctx_has_vsx_region, efault_out);
+		unsafe_copy_to_user(&old_ctx->uc_sigmask, &current->blocked,
+				    sizeof(sigset_t), efault_out);
+
+		user_write_access_end();
 	}
 	if (new_ctx == NULL)
 		return 0;
@@ -698,6 +707,10 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx,
 	/* This returns like rt_sigreturn */
 	set_thread_flag(TIF_RESTOREALL);
 	return 0;
+
+efault_out:
+	user_write_access_end();
+	return -EFAULT;
 }
 
 
@@ -850,9 +863,12 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
 	} else {
 		err |= __put_user(0, &frame->uc.uc_link);
 		prepare_setup_sigcontext(tsk, 1);
-		err |= setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
-					NULL, (unsigned long)ksig->ka.sa.sa_handler,
-					1);
+		if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
+			return -EFAULT;
+		err |= __unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk,
+						ksig->sig, NULL,
+						(unsigned long)ksig->ka.sa.sa_handler, 1);
+		user_write_access_end();
 	}
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
-- 
2.26.1


  parent reply	other threads:[~2021-02-03 18:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 18:43 [PATCH v5 00/10] Improve signal performance on PPC64 with KUAP Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 01/10] powerpc/uaccess: Add unsafe_copy_from_user Christopher M. Riedl
2021-02-05  4:47   ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 02/10] powerpc/signal: Add unsafe_copy_{vsx, fpr}_from_user() Christopher M. Riedl
2021-02-05  5:17   ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 03/10] powerpc/signal64: Move non-inline functions out of setup_sigcontext() Christopher M. Riedl
2021-02-08  4:44   ` Daniel Axtens
2021-02-10  4:37     ` Christopher M. Riedl
2021-02-10 21:06       ` Daniel Axtens
2021-02-10 23:51         ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 04/10] powerpc: Reference param in MSR_TM_ACTIVE() macro Christopher M. Riedl
2021-02-12  4:52   ` Daniel Axtens
2021-02-03 18:43 ` [PATCH v5 05/10] powerpc/signal64: Remove TM ifdefery in middle of if/else block Christopher M. Riedl
2021-02-12  5:21   ` Daniel Axtens
2021-02-17 19:27     ` Christopher M. Riedl
2021-02-18 10:47       ` Michael Ellerman
2021-02-03 18:43 ` Christopher M. Riedl [this message]
2021-02-12  5:41   ` [PATCH v5 06/10] powerpc/signal64: Replace setup_sigcontext() w/ unsafe_setup_sigcontext() Daniel Axtens
2021-02-17 19:31     ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 07/10] powerpc/signal64: Replace restore_sigcontext() w/ unsafe_restore_sigcontext() Christopher M. Riedl
2021-02-12 21:17   ` Daniel Axtens
2021-02-17 19:32     ` Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 08/10] powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 09/10] powerpc/signal64: Rewrite rt_sigreturn() " Christopher M. Riedl
2021-02-03 18:43 ` [PATCH v5 10/10] powerpc/signal64: Use __get_user() to copy sigset_t Christopher M. Riedl
2021-02-05  4:40   ` Christopher M. Riedl
2021-02-09 21:45   ` Christophe Leroy
2021-02-10  4:16     ` Christopher M. Riedl
2021-02-12 21:21   ` Daniel Axtens
2021-02-17 19:53     ` Christopher M. Riedl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203184323.20792-7-cmr@codefail.de \
    --to=cmr@codefail.de \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).